Engineering topics

Joshi, Suresh M.

Publications and source records attributed to Joshi, Suresh M..

47 records · Page 3

NASA NTRS1990

Advances in dynamics and control of flexible spacecraft and space-based manipulations; Proceedings of the Symposium, ASME Winter Annual Meeting, Dallas, TX, Nov. 25-30, 1990

Consideration is given to control formulations for vibration suppression of an active structure in slewing motions, the use if distributed sensing in control of large flexible spacecraft, an improved shooting method for solving minimum-time maneuver problems, and nonlinear slew maneuver dynamics of large flexible spacecrafts. Attention is also given to initial experiments in trusterless locomotion control of a free-flying robot, dynamic analysis to evaluate viscoelastic passive damping augmentation for the Space Shuttle Remote Manipulator System, initial experiments in cooperative manipulation from a moving platform, and intelligent pipelined control architecture for remote robotic applications.

Joshi, Suresh M.↗

NASA NTRS1989

Modeling and control of flexible space platforms with articulated payloads

The first steps in developing a methodology for spacecraft control-structure interaction (CSI) optimization are identification and classification of anticipated missions, and the development of tractable mathematical models in each mission class. A mathematical model of a generic large flexible space platform (LFSP) with multiple independently pointed rigid payloads is considered. The objective is not to develop a general purpose numerical simulation, but rather to develop an analytically tractable mathematical model of such composite systems. The equations of motion for a single payload case are derived, and are linearized about zero steady-state. The resulting model is then extended to include multiple rigid payloads, yielding the desired analytical form. The mathematical models developed clearly show the internal inertial/elastic couplings, and are therefore suitable for analytical and numerical studies. A simple decentralized control law is proposed for fine pointing the payloads and LFSP attitude control, and simulation results are presented for an example problem. The decentralized controller is shown to be adequate for the example problem chosen, but does not, in general, guarantee stability. A centralized dissipative controller is then proposed, requiring a symmetric form of the composite system equations. Such a controller guarantees robust closed loop stability despite unmodeled elastic dynamics and parameter uncertainties.

Graves, Philip C.↗

NASA NTRS1989

Dynamics and control of multibody/robotic systems with space applications; Proceedings of the ASME Winter Annual Meeting, San Francisco, CA, Dec. 10-15, 1989

The present conference on the dynamics and control methods of multibody robotic systems applicable to outer space applications first gives attention to such topics in multibody dynamics and control as the substructure synthesis approach to flexible multibody system control, an elastic finite-element kinematic analysis of a multirigid body, computational methods for high speed vehicles on flexible guideways, and multiarm coordination and control. Attention is then given to such issues in space manipulator dynamics and control methods as the global navigation of a free-flying space robot, dynamic singularities in the control of free-floating space manipulators, experimental results for compact space robot actuator control, and a 17-degree-of-freedom dexterous manipulator.

Joshi, Suresh M.↗

NASA NTRS1988

Robust multivariable control of large space structures

The problem of designing attitude-control systems for large flexible space structures is considered. The difficulties which arise because of special dynamic characteristics are described, and methods for overcoming them using two type of controllers are presented. The first type of controller considered is a model-based compensator (MBC) and the second is the 'dissipative' controller which employs output feedback. Based on the analytical and numerical results obtained, the MBC can offer good performance under normal conditions, while the dissipative controller offers more robustness but perhaps reduced performance in situations involving larger uncertainties.

Joshi, Suresh M.↗

NASA NTRS1988

Recent advances in control of nonlinear and distributed parameter systems, robust control, and aerospace control applications; Proceedings of the Symposium, ASME Winter Annual Meeting, Chicago, IL, Nov. 27-Dec. 2, 1988

Papers are presented on the control of distributed parameter systems using the coprime factorization approach, a hierarchy of geometrically exact models of rotating beams, and the temperature stability of a flux modulated radiant slab. Also considered are a network representation for robots, recovery from controller bounding, and the design of controllers for robust tracking and model following. Other topics include an active control law synthesis for flexible aircraft, the low-order control of large aerospsace structures using residual model filters, and a comparison of component cost methods for component model reduction.

Bentsman, Joseph↗

NASA NTRS1987

Information prioritization for control and automation of space operations

The applicability of a real-time information prioritization technique to the development of a decision support system for control and automation of Space Station operations is considered. The steps involved in the technique are described, including the definition of abnormal scenarios and of attributes, measures of individual attributes, formulation and optimization of a cost function, simulation of test cases on the basis of the cost function, and examination of the simulation scenerios. A list is given comparing the intrinsic importances of various Space Station information data.

Ray, Asock↗

NASA NTRS1987

Synthesis of fine-pointing control systems for large, flexible spacecraft

This paper considers the problem of designing attitude control systems for large space structures (LSS). The difficulties in control systems design, which arise because of special dynamic characteristics of LSS, are described, and methods for overcoming them using two types of controllers are presented. The first type of controller considered is a model-based compensator (MBC), and the second is the 'dissipative' controller which employs output feedback. Based on the numerical and analytical results obtained, the MBC can offer good performance under normal conditions, while the dissipative controller offers more robustness but perhaps reduced performance in situations involving large uncertainties.

Joshi, Suresh M.↗

NASA NTRS1987

Controller synthesis for flexible spacecraft using multivariable loop-shaping and factorization methods

The problem of designing fine-pointing controllers is considered for large, flexible space structures using modern multivariable synthesis methods. The first method is an iterative procedure which utilizes frequency-domain singular-value techniques, and is found to yield satisfactory performance and robustness. For the second method, which is based on coprime factorizations, a particular bicoprime is obtained, and the steps in the design process are described. This method is still under development.

Joshi, Suresh M.↗

NASA NTRS1986

Computer-aided design and distributed system technology development for large space structures

Proposed large space structures have many characteristics that make them difficult to analyze and control. They are highly flexible, with components mathematically modeled by partial differential equations or very large systems of ordinary differential equations. They have many resonant frequencies, typically low and closely spaced. Natural damping may be low and/or improperly modeled. Coupled with stringent operational requirements of orientation, shape control, and vibration suppression, and the inability to perform adequate ground testing, these characteristics present an unconventional identification and control design problem to the systems theorist. Some of the research underway within Langley's Spacecraft Control Branch, Guidance and Control Division aimed at developing theory and algorithms to treat large space structures systems identification and control problems is described. The research areas to be considered are computer-aided design algorithms, and systems identification and control of distributed systems.

Armstrong, Ernest S.↗

NASA NTRS1986

Robust multivariable controller design for flexible spacecraft

Large, flexible spacecraft are typically characterized by a large number of significant elastic modes with very small inherent damping, low, closely spaced natural frequencies, and the lack of accurate knowledge of the structural parameters. Summarized here is some recent research on the design of robust controllers for such spacecraft, which will maintain stability, and possible performance, despite these problems. Two types of controllers are considered, the first being the linear-quadratic-Gaussian-(LQG)-type. The second type utilizes output feedback using collocated sensors and actuators. The problem of designing robust LQG-type controllers using the frequency domain loop transfer recovery (LTR) method is considered, and the method is applied to a large antenna model. Analytical results regarding the regions of stability for LQG-type controllers in the presence of actuator nonlinearities are also presented. The results obtained for the large antenna indicate that the LQG/LTR method is a promising approach for control system design for flexible spacecraft. For the second type of controllers (collocated controllers), it is proved that the stability is maintained in the presence of certain commonly encountered nonlinearities and first-order actuator dynamics. These results indicate that collocated controllers are good candidates for robust control in situations where model errors are large.

Joshi, Suresh M.↗

NASA NTRS1984

A modal model for SCOLE structural dynamics

Information on a modal model for the Spacecraft Control Laboratory (SCOLE) is given in viewgraph form. A partial differential equation model covering roll bending, pitch bending, torsion, shear forces, and bending moments is given.

Joshi, Suresh M.↗