Engineering Papers⌕ Search

Engineering topics

Joseph Schulz

Publications and source records attributed to Joseph Schulz.

13 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Monte-Carlo Analysis of Minimum Thermocouple Depths using Icarus

Icarus is a three-dimensional, unstructured, finite-volume material response solver developed at NASA Ames Research Center and has been verified against other NASA material response tools like FIAT, which have a long history of successfully designing thermal protection system (TPS). Icarus solves a set of conservation equations for mass and energy and uses Darcy’s Law in place of momentum conservation. An ecosystem of material response tools has been built around a general-purposed Icarus library that in addition to the typical material response analysis also supports TPS sizing (1-D and multi-dimensional), uncertainty quantification, and has been successfully integrated into a multi-physics architecture built around US3D. In this paper, a brief overview of Icarus and its capabilities will be presented using an illustrative Monte Carlo analysis of the one-dimensional, in-depth material response of a representative Dragonfly trajectory.

Material Response↗
NASA NTRSDate not supplied

DPLR-NEQAIR Coupler Tutorial

The DPLR-NEQAIR coupler utility provides a framework for running computational simulations of high temperature gases that account for radiative emission and absorption of the gas. This presentation provides an overview of the methodology use to achieve this coupling and an introduction to using the coupling utility itself.

DPLR↗
NASA NTRSDate not supplied

Monte-Carlo Analysis of Minimal Thermocouple Depths using Icarus

Icarus is a three-dimensional, unstructured, finite-volume material response solver developed at NASA Ames Research Center \cite{Schulz_2017} and has been verified against other NASA material response tools like FIAT, which have a long history of successfully designing thermal protection system (TPS). Icarus solves a set of conservation equations for mass and energy and uses Darcy’s Law in place of momentum conservation. An ecosystem of material response tools has been built around a general-purposed Icarus library that in addition to the typical material response analysis also supports TPS sizing (1-D and multi-dimensional), uncertainty quantification, and has been successfully integrated into a multi-physics architecture built around US3D \cite{Schroeder_2021}. In this paper, a brief overview of Icarus and its capabilities will be presented using an illustrative Monte Carlo analysis of the one-dimensional, in-depth material response of a representative Dragonfly trajectory.

Material Response↗
NASA NTRSDate not supplied

Overview of the Material Response Code Icarus

Icarus is a material response code capable of modeling the in-depth heat transfer for multi-dimensional, ablative and non-ablative thermal protection systems. Since the initial release of Icarus, several improvements have been made to increase the robustness, performance, and modeling capability of the tool. This paper will review the capabilities of Icarus, discuss results from recent validation exercises highlighting current modeling capability, and summarize the current and future development efforts.

material response↗
NASA NTRSDate not supplied

Dragonfly Entry Aerosciences Measurements (DrEAM) Suite Science Objectives

NASA Ames and Langley are partnering with DLR to propose a comprehensive instrumentation suite known as the Dragonfly Entry Aerosciences Measurements (DrEAM). DrEAM will provide key aerothermodynamic data and performance analysis for Dragonfly’s forebody and backshell Thermal Protection System (TPS), and also includes a DLR-provided Data Acquisition System (DAS). Titan's atmosphere predominantly consists of nitrogen (~ 98% by mole) with small amounts of methane (~ 2% by mole). CN is a strong radiator and is found in nonequilibrium concentrations for Titan entry, the modeling of which has proven to be a difficult task. The DrEAM instrumentation suite will significantly advance the state-of-the-art not only by documenting the environment and performance of Dragonfly’s entry system but also by making key measurements in Titan’s atmosphere for the first time, thus providing new benchmark data applicable to entry science more generally.

Aaron Brandis↗
NASA NTRSDate not supplied

Simulations of Coupled Shoulder Ablation of A Conceptual Aeroshell

The current study explores coupled numerical simulations of flow dynamics and material response affect ablation of the shoulder region of an entry capsule used in space missions like the Mars Sample Return (MSR) project. A new computational tool named Ares, developed at NASA Ames Research Center, is applied to carry out the coupled simulations by interconnecting well-established US3D (flow solver) and Icarus (material response solver), and the material considered is three-dimensional mid-density carbon phenolic (3MDCP). Particularly, this work extends the uncoupled analysis of Shrestha et al. 2022 by incorporating the coupling mechanism across the ablating surface between fluid and the capsule geometry. For simplicity, an axisymmetric geometry of the entry system is considered. A few mission-relevant parametric studies such as angles of orientation of the material layers with respect to the streamwise direction, backshell boundary conditions, and alternation of convective heat-transfer coefficients are investigated to essentially explore Ares capability with the primary focus on shoulder location.

Coupled Ablation Modeling↗
NASA NTRSDate not supplied

Coupled Material Response Simulations of Dragonfly Capsule and DrEAM Reconstruction

Icarus is a three-dimensional, unstructured, finite-volume material response solver developed at NASA Ames Research Center and has been recently used to analyze the material response of the Dragonfly capsule for a variety of problems. Since the Dragonfly capsule will be instrumented in a similar manner to the Mars 2020 and MSL capsules, it is important to assess how our current simulation tools can aid in understanding Dragonfly Entry Aerosciences Measurements (DrEAM). In this presentation, the Ares multi-physics tool that couples Icarus to the flow and radiation physics of the aerothermal environment will be used to better understand how modeling sensitivities might affect environment reconstructions and our understanding of measured data. Ares couples Icarus to the US3D flow solver and NERO, a reduced-order, finite-volume radiation transport solver and uses a customized time-scale management to enable coupled simulations for a large portion of the Dragonfly trajectory. As a result of the coupling, a more accurate and consistent assessment of modelling sensitivities to aerothermal reconstruction can be assessed. For example, the radiometer is sensitive to the quantity of CN in the flow, which is a byproduct of the free-stream methane but also the pyrolysis gas products injected into the boundary layer due to ablation of the heatshield. Ares will be used to conduct a simulation of the full Dragonfly capsule for 50 seconds of the trajectory. The different aerothermal and material response models will be discussed and the key results will be presented in terms of the simulated thermocouple and radiometer measurements on the backshell.

Ablation↗
NASA NTRSDate not supplied

Developments to the Ares Multi-Physics Framework

Increasingly challenging problems in Entry, Descent, and Landing (EDL) have motivated the development of a computational framework that encompasses the advances in high-fidelity modeling and a robust foundation for TPS design in a single software package. This is the objective of the Ares multi-physics solver which, to date, couples the US3D flow solver with Icarus (material response) and Nero (radiation), through detailed time-scale management, while also incorporating the physics of fluid-solid boundaries such as gas-surface interaction chemistry and shape change. Ares, which is currently in the development stage, is being assessed against a variety of EDL relevant problems such as arc-jet tests of varying geometries and materials (Figs. 1 and 2), the earth entry of MSR-EES and the Titan entry of Dragonfly. This presentation will focus on the findings to-date regarding development of the technology as well as its standing with respect to available experimental data and/or reference solutions.

CFD↗
NASA NTRSDate not supplied

Ares: A Coupling Methodology for Ablation Modeling

To enable modeling of complex and coupled ablation problems, a multi-physics framework is developed. A methodology for modeling shape change in coupled systems is presented. The approach taken to model gas-surface interactions and translate coupled surface phenomena to physically meaningful boundary conditions in the distinct solvers is discussed. Particular emphasis is placed on the nature of coupled boundary conditions pertaining to surface energy and mass balances as well as surface chemistry modeling. The developed methodology is used to simulate a shear test in arc-jet conditions in order to assess the validity of the coupled approach as well as the implementation of the relevant physical processes.

EDL↗
NASA NTRSDate not supplied

An Approach to Solving Enclosure Radiation Problems in A Multi-Physics Context

Thermal protection system analysis of complex features or damage sites can sometimes require modeling of high temperature enclosures. Implementing efficient and accurate view-factor algorithms required to model such problems is complex. The current work leverages the Non-equilibrium Radiation (NERO) software, which solves the radiation transport equation in a finite-volume scheme, to alleviating challenges often faced with view-factor calculations. By assuming heat transfer occurs only between grey bodies and that the medium is non-participating, computational cost of the method is significantly reduced. The enclosure physics are modeled through emitting and reflecting boundary conditions in NERO. The emitted radiative flux is dependent on the wall temperature which is a solution to the material response, obtained from Icarus, in this context. The Ares framework manages the time-advancement and exchange of the necessary data between the solvers. The surface energy balance is modified to account for the enclosure terms within the material response boundary condition. The methodology was verified against analytical solutions including radiating parallel plates, a hollow cylinder (shown in Fig. 1), and a hemisphere. Application of the methodology to inform the design of components of the Dragonfly system will be shown.

Ablation↗
NASA NTRSDate not supplied

Multiscale Modeling of Woven Ablative Thermal Protection System Materials

The NASA Entry Systems Modeling project maintains a portfolio of computational model and tool development activities focused on reducing performance uncertainties in ablative Thermal Protection System (TPS) materials for NASA missions. The development activities span material scale and strive to allow microstructural characterization of material structure and properties, mesoscale analyses of damage, and macroscale evaluation of heatshield performance and recession in a given aerothermodynamic environment. This talk will detail the application of developed capabilities at all three scales to the woven TPS material that the Agency has selected as the heatshield for the Mars Sample Return Earth Entry System (MSR-EES) mission – 3D Mid-Density Carbon Phenolic (3MDCP). Each of the applications focuses on driving down uncertainties in material performance and thus risk for MSR-EES and other future missions that may leverage woven TPS. At the microscale, machine learning techniques are used to characterize images from destructive microscopy and inform structural variability. At the mesoscale, Lagrangian techniques are used to simulate ballistic impact and interpret damage modes noted in experiments. At the macroscale, coupled flow-material response techniques are validated by Arc Jet testing to enable heatshield design for missions with massive ablation.

Justin B Haskins↗