Engineering PapersSearch

Engineering topics

Jordan Sakakeeny

Publications and source records attributed to Jordan Sakakeeny.

Operational Integration Potential of Regional Uncrewed Aircraft Systems Into the Airspace System

As part of newly developing aviation markets, fixed-wing Uncrewed Aircraft Systems (UAS) are projected to impact airspace systems and conventional air traffic in the future. The initial introduction of fixed-wing cargo UAS for regional operations is anticipated to occur at smaller under-utilized airports. Therefore, this paper assesses the integration potential of regional fixed-wing cargo UAS into the airspace system. A baseline is established to identify potential airports for cargo UAS operations in different areas. Additionally, using 2022 data, regional aircraft eligible for future cargo UAS operations are investigated. Finally, the accessibility of these regional aircraft at the identified airports was analysed. Based on the availability of current certified landing systems needed for initial UAS operations, potential airports in the areas Germany, Texas, and California for UAS operations are compared. Additionally, based on the maximum takeoff weight allowances of airport runways, current air transport operations at airports, and airspace classes, individual airports with a high potential for the introduction of initial cargo UAS operations with and without the availability of landing systems needed for UAS are identified and compared among the investigated areas. Despite a total of 173 identified airports for potential UAS operations in Germany, 376 in Texas, and 231 in California, only eleven of these airports currently have the certified landing systems needed for initial UAS operations. However, other landing system technologies that are currently under development, such as vision-based landing systems, might support UAS accessibility at the identified airports for potential UAS operations in the future.

Uncrewed aircraft systems

PAAV Concept Document

The Pathfinding for Airspace with Autonomous Vehicles (PAAV) Concept Document, version 1.0, lays out the key challenges and potential solutions for the use of uncrewed aircraft (UA) technology for future regional air cargo operations. The challenges and solutions described in this document were informed by communications with the UA industry community (e.g., RTCA, the Federal Aviation Administration, and regional air cargo business operators), as well as the PAAV team’s research activities during the last two years including four tabletop exercises, a human-in-the-loop simulation study, a numerical simulation study, a functional allocation study, and flight data analysis (Appendix A). This document first describes the expected operational context of PAAV (Section 2), such as the flight mission, baseline UAS components, nominal operations, m:N operations (i.e., "m" remote pilots per "N" aircraft), and off-nominal operations. This context sets the scope for the PAAV concept development work. PAAV concept development assumes that UA operations will be increasingly autonomous. Thus, near- and far-term assumptions are defined (Section 3). PAAV identified seven key challenges for UA operations (Section 4): - Flight route planning - Separation and flow management - Traffic pattern integration - Contingency management - Taxi, takeoff, and landing - m:N operations - Communications operations The following 13 potential solutions to these challenges are then described (Section 5): - Scalable communications architecture - Data link - Designated UAS corridors - Crew planning for m:N operations - Flight route optimization - Traffic load-level control - Trajectory solutions with data link - Automated hazard avoidance for m:N operations - Traffic pattern integration (TPI) tool - Standard lost command and control (C2) link (LC2L) procedures - Automated hazard avoidance under LC2L - Auto-taxi, auto-takeoff, and auto-land - Ground control station (GCS) user interface for m:N operations The document attempts to link each of these solutions to one or more of the challenge areas. Novel solutions involving numerous automation technologies are needed to mitigate traffic and airspace management challenges, especially for realizing m:N operations and ensuring safety under LC2L conditions. The purpose of this document is to help understand alternatives and tradeoffs among potential solutions and provide a foundation for a cohesive PAAV concept that will be described and refined in subsequent concept versions.

Unmanned aircraft, uncrewed aircraft, regional air

Impact of Latency and Reliability on Separation Assurance with Remotely Piloted Aircraft in Terminal Operations

Remotely Piloted Aircraft (RPA) for cargo operations in the national airspace system will impact safety due to, among other factors, the latency and reliability of command & control, and of communication. This paper investigates the safety impact with increasing mix of RPA amidst manned traffic in a generic arrival pattern with three merging flows. Latency was modelled as the response time between air traffic control's determination of a resolution and the RPAs' initiation of the maneuver. Reliability was modelled as a message drop probability. The experiment was repeated with two different aircraft types having different performance characteristics as representatives of RPA for conducting automated cargo operations. Overall response time above thirty seconds and message drop probability over twenty percent caused losses of separation. Specific results depended on the RPA aircraft type. The detailed impacts of latency and reliability with increasing mix of RPA traffic are provided. Applications of the approach for further studies at increasing levels of automation are also discussed.

Vishwanath Bulusu

Preliminary Characterization of Unmanned Air Cargo Routes Using Current Cargo Operations Survey

The introduction of regional cargo unmanned aircraft systems into the National Airspace System is anticipated within the coming years. Because they are remotely piloted, these aircraft are expected to utilize increasing aircraft automation and autonomy, require special infrastructure accommodations for navigation, communication, command and control and potentially need special treatment from air traffic control. In order to assess the accessibility and impacts of these operations across the national airspace, this preliminary study investigates current and estimated future demand for air cargo operations in the continental United States. Air cargo demand is broken down by aircraft type and airport categories to produce a rough nation-wide classification of cargo operations. Then, the state of Texas is investigated as a focus region, where the impacts of regional cargo unmanned aircraft systems on the airspace are investigated in further detail. The potential technologies that can assist in regional cargo unmanned aircraft system accessibility are defined at airports across the focus region. A single airport, Fort Worth Alliance, is highlighted to discuss airport-level statistics. Finally, a qualitative classification of airports by the type of cargo operations is suggested.

Unmanned Aircraft

Preliminary Characterization of Unmanned Air Cargo Routes Using Current Cargo Operations Survey

The introduction of regional cargo unmanned aircraft systems into the National Airspace System is anticipated within the coming years. Because they are remotely piloted, these aircraft are expected to utilize increasing aircraft automation and autonomy, require special infrastructure accommodations for navigation, communication, command and control and potentially need special treatment from air traffic control. In order to assess the accessibility and impacts of these operations across the national airspace, this preliminary study investigates current and estimated future demand for air cargo operations in the continental United States. Air cargo demand is broken down by aircraft type and airport categories to produce a rough nation-wide classification of cargo operations. Then, the state of Texas is investigated as a focus region, where the impacts of regional cargo unmanned aircraft systems on the airspace are investigated in further detail. The potential technologies that can assist in regional cargo unmanned aircraft system accessibility are defined at airports across the focus region. A single airport, Fort Worth Alliance, is highlighted to discuss airport-level statistics. Finally, a qualitative classification of airports by the type of cargo operations is suggested.

Unmanned Aircraft, Unmanned Aircraft Systems, UAS,

A Framework for Dynamic Architecture and Functional Allocations for Increasing Airspace Autonomy

To enable scalability of air travel for use cases such as cargo delivery, it is anticipated that future air traffic operations will involve unmanned aircraft operated by remote pilots. Of particular interest are schemes where a small number of pilots operate a large number of vehicles, mitigating high cost and pilot shortage issues. Such architectures require increased levels of automation and supervisory control modes. They also require ensuring safe operations when the command and control link to the vehicle is degraded or lost completely, rendering the vehicle autonomous. To evaluate these variable and dynamic architectures, this paper will present a framework for decomposing the functions necessary to ensure safe, orderly, and expeditious air travel, assessing the agents in the system, and classifying the levels of autonomy. Then, an example allocation to agents of roles for the function of separation assurance is presented, highlighting the dependency of the allocation on three main factors: time criticality of a potential separation violation, the ratio of pilots to vehicles, and the loss of the command and control link.

air traffic management, function allocation, auton

A Framework for Dynamic Architecture and Functional Allocations for Increasing Airspace Autonomy

To enable scalability of air travel for use cases such as cargo delivery, it is anticipated that future air traffic operations will involve unmanned aircraft operated by remote pilots. Of particular interest are schemes where a small number of pilots operate a large number of vehicles, mitigating high cost and pilot shortage issues. Such architectures require increased levels of automation and supervisory control modes. They also require ensuring safe operations when the command and control link to the vehicle is degraded or lost completely, rendering the vehicle autonomous. To evaluate these variable and dynamic architectures, this paper will present a framework for decomposing the functions necessary to ensure safe, orderly, and expeditious air travel, assessing the agents in the system, and classifying the levels of autonomy. Then, an example allocation to agents of roles for the function of separation assurance is presented, highlighting the dependency of the allocation on three main factors; time criticality of a potential separation violation, the ratio of pilots to vehicles, and the loss of the command and control link.

air traffic management

Functional Allocation Approach for Separation Assurance for Remotely Piloted Aircraft

A functional analysis framework is employed with the objective of exploring the separation assurance function for the remotely piloted aircraft system. The architecture of the remotely piloted aircraft system—highlighting several of the component systems and the functions resident onboard the remotely piloted aircraft and in the ground control station—is described to provide the context for understanding the complexity of the said system for a detailed functional analysis. The interactions between the agents of the separation assurance function belonging to the air traffic service provider, remotely piloted aircraft system operator and remotely piloted aircraft are described. Separation assurance by air traffic control, remain well clear by the remotely piloted aircraft system and collision avoidance onboard the remotely piloted aircraft are briefly discussed. The functional analysis framework is illustrated by relating the agents to the actions of (a) acquiring the surveillance information, (b) checking for conflicts, (c) creating the solutions for resolving conflicts and (d) implementing the conflict resolution solutions. This example is offered as a template by which a more detailed functional analysis of this and other functions could be developed. The architecture of the remotely piloted aircraft system is described to aid this process.

functional analysis

Functional Allocation Approach for Separation Assurance for Remotely Piloted Aircraft

A functional analysis framework is employed with the objective of exploring the separation assurance function for the remotely piloted aircraft system. The architecture of the remotely piloted aircraft system—highlighting several of the component systems and the functions resident onboard the remotely piloted aircraft and in the ground control station—is described to provide the context for understanding the complexity of the said system for a detailed functional analysis. The interactions between the agents of the separation assurance function belonging to the air traffic service provider, remotely piloted aircraft system operator and remotely piloted aircraft are described. Separation assurance by air traffic control, remain well clear by the remotely piloted aircraft system and collision avoidance onboard the remotely piloted aircraft are briefly discussed. The functional analysis framework is illustrated by relating the agents to the actions of (a) acquiring the surveillance information, (b) checking for conflicts, (c) creating the solutions for resolving conflicts and (d) implementing the conflict resolution solutions. This example is offered as a template by which a more detailed functional analysis of this and other functions could be developed. The architecture of the remotely piloted aircraft system is described to aid this process.

Functional analysis

Impact of Latency and Reliability on Separation Assurance with Remotely Piloted Aircraft in Terminal Operations

Remotely Piloted Aircraft (RPA) for cargo operations in the national airspace system will impact safety due to, among other factors, the latency and reliability of command & control, and of communication. This paper investigates the safety impact with increasing mix of RPA amidst manned traffic in a generic arrival pattern with three merging flows. Latency was modelled as the response time between air traffic control's determination of a resolution and the RPAs' initiation of the maneuver. Reliability was modelled as a message drop probability. The experiment was repeated with two different aircraft types having different performance characteristics as representatives of RPA for conducting automated cargo operations. Overall response time above thirty seconds and message drop probability over twenty percent caused losses of separation. Specific results depended on the RPA aircraft type. The detailed impacts of latency and reliability with increasing mix of RPA traffic are provided. Applications of the approach for further studies at increasing levels of automation are also discussed.

Vishwanath Bulusu

Initial Study of Tailored Trajectory Management for Multi-Vehicle Uncrewed Regional Air Cargo Operations

The primary contribution of this paper is an evaluation of the potential value of a tailored trajectory management (TTM) capability for uncrewed aircraft (UA) operators that is proactive in detecting conflicts and developing trajectory-based solutions for UA prior to air traffic control (ATC) performing conflict resolution. The experiment matrix is composed of one baseline simulation that models current air traffic operations without such a capability and four test simulations with different configurations of such a capability. In each simulation, five UA operations into Fort Worth Alliance airport were modeled in the presence of recorded tracks for about 4700 flights on January 18, 2022. The analysis focused on the extent to which such a capability was able to preclude an event that could spike UA operator workload. More specifically, in this study, the emulated UA operator TTM capability for multi-vehicle regional air cargo operations was able to reduce the number of instances of concurrent UA conflicts in the modeled ATC conflict resolution timeframe of 8 minutes or less from three to as low as one.

uncrewed aircraft, regional air cargo, tailored tr

Comparative Analysis of Airspace System Accessibility for Uncrewed Aircraft Systems for Regional Operations

As part of newly developing aviation markets, fixed-wing Uncrewed Aircraft Systems (UAS) are projected to impact airspace systems and conventional air traffic in the future. The initial introduction of fixed-wing cargo UAS for regional operations is anticipated to occur at smaller under-utilized airports. Therefore, this paper assesses the integration potential of regional fixed-wing cargo UAS into the airspace system. A baseline is established to identify potential airports for UAS operations in different areas. Additionally, using 2022 data, regional aircraft eligible for future cargo UAS operations are investigated. Finally, the accessibility of these regional aircraft at the identified airports was analyzed. Based on the availability of current certified landing systems needed for initial UAS operations, the potential airports for UAS operations are compared in the areas of Germany, Texas, and California. Despite 173 identified airports for potential UAS operations in Germany, 376 in Texas, and 227 in California, only eleven of these airports provide current certified landing systems needed for initial UAS operations. However, other landing system technologies that are currently under development, such as vision-based landing systems, might support UAS accessibility at the identified airports for potential UAS operations in the future.

Uncrewed aircraft systems

Initial Assessment of Lost Command and Control Link Procedures

This paper presents an initial assessment of lost command and control (LC2L) procedures for large Uncrewed Aircraft Systems (UAS) in a simulated representative airspace environment using real airspace procedures. The experiment matrix consists of nine different flight routes: four nominal, four following current LC2L procedures, and one that routes the UAS more conservatively through less-busy airspace. For each route, eleven simulated UAS flights – in ten-minute increments – were flown into Fort Worth Alliance Airport following a real Instrument Approach Procedure. The simulated UAS flew amongst real recorded tracks of approximately 4,700 flights on January 18, 2022. The analysis focused primarily on the number of aircraft with which each UAS lost separation and where the losses occurred. This work presents a significant increase in testing capability and provides the foundation for further verification and validation of LC2L procedures using additional analysis metrics.

Uncrewed aircraft

Initial Assessment of Lost Command and Control Link Procedures

This paper presents an initial assessment of lost command and control (LC2L) procedures for large Uncrewed Aircraft Systems (UAS) in a simulated representative airspace environment using real airspace procedures. The experiment matrix consists of nine different flight routes: four nominal, four following current LC2L procedures, and one that routes the UAS more conservatively through less-busy airspace. For each route, eleven simulated UAS flights – in ten-minute increments – were flown into Fort Worth Alliance Airport following a real Instrument Approach Procedure. The simulated UAS flew amongst real recorded tracks of approximately 4,700 flights on January 18, 2022. The analysis focused primarily on the number of aircraft with which each UAS lost separation and where the losses occurred. This work presents a significant increase in testing capability and provides the foundation for further verification and validation of LC2L procedures using additional analysis metrics.

uncrewed aircraft