Engineering Papers⌕ Search

Engineering topics

Jones, C.

Publications and source records attributed to Jones, C..

At least 127 records · Page 7

Design of a high-performance rotary stratified-charge research aircraft engine

The power section for an advanced rotary stratified-charge general aviation engine has been designed under contract to NASA. The single-rotor research engine of 40 cubic-inches displacement (RCI-40), now being procured for test initiation this summer, is targeted for 320 T.O. horse-power in a two-rotor production engine. The research engine is designed for operating on jet-fuel, gasoline or diesel fuel and will be used to explore applicable advanced technologies and to optimize high output performance variables. Design of major components of the engine is described in this paper.

Jones, C.↗

Cluster of galaxies as a probe of the intergalactic medium

The use of galactic clusters as probes of the intercluster medium is discussed, and the effects of a postulated hot intercluster medium on the diffuse gas associated with clusters of galaxies is examined. It is shown that diffuse intracluster gas, which is observed at X-ray wavelengths, is a powerful probe of intergalactic space. The consequences of conduction are explored and the existence and properties of the intracluster gas are used to constrain the temperature and density of a uniform gas filling the universe. The effects of a nonuniform medium on the results are discussed and it is shown that for plausible scenarios the evaporative mass loss rates are insensitive to changes in the density and temperature of the intracluster medium in the vicinity of clusters. The parameters such a gas would have to have in order to explain the larger energy per unit mass found in the intracluster gas compared to that in galaxies are calculated.

Forman, W.↗

The structure of clusters of galaxies observed with Einstein

Imaging observations from the Einstein Observatory are used to determine properties of galactic clusters and the intracluster gas. The hydrostatic-isothermal gas model is applied to obtain the cluster core radius, the limiting slope of the X-ray surface brightness distribution, and the presence and magnitude of a central luminosity excess above that predicted from the model when fit to the outer regions of the cluster. It is concluded that clusters can be divided into two basic families, one with small core radii and X-ray emission centered on a central dominant galaxy, and one with larger core radii and generally no central, stationary bright galaxy. The former type probably begins to form in the early stages of a cluster's dynamical evolution. The intracluster gas has a larger scale height than that of the galaxies based on the fit of the hydrostatic-isothermal model to the X-ray surface brightness profiles.

Jones, C.↗

Multi-Fuel Rotary Engine for General Aviation Aircraft

Design studies, conducted for NASA, of Advanced Multi-fuel General Aviation and Commuter Aircraft Rotary Stratified Charge Engines are summarized. Conceptual design studies of an advanced engine sized to provide 186/250 shaft KW/HP under cruise conditions at 7620/25,000 m/ft. altitude were performed. Relevant engine development background covering both prior and recent engine test results of the direct injected unthrottled rotary engine technology, including the capability to interchangeably operate on gasoline, diesel fuel, kerosene, or aviation jet fuel, are presented and related to growth predictions. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 30 to 35% fuel economy improvement for the Rotary-engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed.

Jones, C.↗

Multi-fuel rotary engine for general aviation aircraft

Design studies of advanced multifuel general aviation and commuter aircraft rotary stratified charge engines are summarized. Conceptual design studies were performed at two levels of technology, an advanced general aviation engines sized to provide 186/250 shaft kW/hp under cruise conditions at 7620 (25,000 m/ft) altitude. A follow on study extended the results to larger (2500 hp max.) engine sizes suitable for applications such as commuter transports and helicopters. The study engine designs were derived from relevant engine development background including both prior and recent engine test results using direct injected unthrottled rotary engine technology. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 27 to 33 percent fuel economy improvement for the rotary engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed. Previously announced in STAR as N83-18910

Jones, C.↗

Advanced rotary engines

The broad objectives of this paper are the following: (1) to summarize the Curtiss-Wright design, development and field testing background in the area of rotary aircraft engines; (2) to briefly summarize past activity and update development work in the area of stratified charge rotary combustion engines; and (3) to discuss the development of a high-performance direct injected unthrottled stratified charge rotary combustion aircraft engine. Efficiency improvements through turbocharging are also discussed.

Jones, C.↗

Study of advanced rotary combustion engines for commuter aircraft

Performance, weight, size, and maintenance data for advanced rotary aircraft engines suitable for comparative commuter aircraft system evaluation studies of alternate engine candidates are provided. These are turbocharged, turbocompounded, direct injected, stratified charge rotary engines. Hypothetical engines were defined (an RC4-74 at 895 kW and an RC6-87 at 1490 kW) based on the technologies and design approaches used in the highly advanced engine of a study of advanced general aviation rotary engines. The data covers the size range of shaft power from 597 kW (800 hp) to 1865 kW (2500 hp) and is in the form of drawings, tables, curves and written text. These include data on internal geometry and configuration, installation information, turbocharging and turbocompounding arrangements, design features and technologies, engine cooling, fuels, scaling for weight size BSFC and heat rejection for varying horsepower, engine operating and performance data, and TBO and maintenance requirements. The basic combustion system was developed and demonstrated; however the projected power densities and performance efficiencies require increases in engine internal pressures, thermal loading, and rotative speed.

Berkowitz, M.↗

The X-ray morphology of Abell 1367

X-ray observations of the nearby cluster Abell 1367 were made with the Imaging Proportional Counter (IPC) and High Resolution Imager (HRI) aboard the Einstein Observatory. The IPC is used to study the diffuse cluster emission. With the HRI, eight point sources are detected above the diffuse cluster emission, three of which are apparently associated with cluster galaxies. In addition, the HRI observations have resolved 13 extended features with characteristic radii of order arcmin, eight of which are associated with cluster galaxies. These extended sources have luminosities of 1.5-6.5 x 10 to the 41st per (H0)50)-squared ergs per sec in the 0.5-4.5 keV band and constitute about 60% of the total cluster emission. The ways in which these hot galactic coronae can be maintained are discussed.

Bechtold, J.↗

Multi-fuel rotary engine for general aviation aircraft

Design studies of advanced multifuel general aviation and commuter aircraft rotary stratified charge engines are summarized. Conceptual design studies were performed at two levels of technology, on advanced general aviation engines sized to provide 186/250 shaft kW/hp under cruise conditions at 7620 (25000 m/ft) altitude. A follow on study extended the results to larger (2500 hp max.) engine sizes suitable for applications such as commuter transports and helicopters. The study engine designs were derived from relevant engine development background including both prior and recent engine test results using direct injected unthrottled rotary engine technology. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 27 to 33 percent fuel economy improvement for the rotary engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed.

Jones, C.↗

Advanced stratified charge rotary aircraft engine design study

A technology base of new developments which offered potential benefits to a general aviation engine was compiled and ranked. Using design approaches selected from the ranked list, conceptual design studies were performed of an advanced and a highly advanced engine sized to provide 186/250 shaft Kw/HP under cruise conditions at 7620/25,000 m/ft altitude. These are turbocharged, direct-injected stratified charge engines intended for commercial introduction in the early 1990's. The engine descriptive data includes tables, curves, and drawings depicting configuration, performance, weights and sizes, heat rejection, ignition and fuel injection system descriptions, maintenance requirements, and scaling data for varying power. An engine-airframe integration study of the resulting engines in advanced airframes was performed on a comparative basis with current production type engines. The results show airplane performance, costs, noise & installation factors. The rotary-engined airplanes display substantial improvements over the baseline, including 30 to 35% lower fuel usage.

Badgley, P.↗

An advanced tracker design for pointing and control of space vehicles using the charge injection device

The use of charge transfer devices (CTD) in pointing and control of space vehicles is examined, with emphasis on the use of charge injection devices (CID). The selection of CTD type and CID operation, including CID signal and noise analysis and signal improvement, are discussed. Star tracking operational advantages of the CTD are pointed out, and the tracking optical concept is discussed and graphically depicted. The position interpolation procedure and the effects of rate of stellar motion on position interpolation are considered, and error analysis is examined. Finally, the breadboard and test program are discussed in detail, coarse and fine acquisition, test for star, track pattern, test procedure and results. An overall accuracy performance of approximately 0.02 pixels or approximately 0.8 arcsec for the test equipment and tracker was obtained.

Jones, C.↗

A morphological classification of clusters of galaxies from Einstein images

The earliest Uhuru observations showed that cluster X-ray sources were not associated with single individual galaxies but were extended sources. It has only been with the advent of the Einstein X-ray imaging observatory that a first look at cluster X-ray morphology and classification has been possible. The proposed classification system divides clusters into two families, including those with and those without X-ray dominant galaxies. Within each family, the dynamical indicators display a full range of values. One subgroup of clusters is those whose X-ray emission is not regular and which do not contain an X-ray dominant galaxy. One of the brighter, nearer and best studied members of this class is Al367. From the X-ray imaging observations, four clusters have been discovered to have double structure in their surface brightness distributions. The Coma cluster is the archtype of an evolved, fully relaxed cluster. Ellipticals in the Virgo core include M87, M86, and M84. It is concluded that the cluster images are useful in determining the cluster family and the cluster's dynamical state.

Jones, C.↗

X-ray-imaging observations of clusters of galaxies

Einstein X-ray imaging observations, made to illustrate the variety of phenomena that can be considered through X-ray image analysis, are presented. Attention is given to general cluster properties and intracluster gas. Individual clusters are discussed (considering classification and dynamical evolution), and X-ray images are used to determine cluster mass distribution and to examine distant clusters. X-ray observations have contributed information in regard to processes affecting galaxies, the intracluster medium, and the cluster itself. Analyses have traced massive halos around dominant galaxies in unevolved clusters, and have helped define the cluster gravitational potential. In addition, multi-component double clusters have been discovered, and material which has been ram-pressure stripped from a hot corona around the M86 galaxy in Virgo was observed. Finally, quantitative estimates of the fractions of young and evolved clusters and determinations of total cluster mass are possible using X-ray observations.

Forman, W.↗

Einstein imaging observations of clusters with a bimodal mass distribution

Einstein imaging observations of four X-ray clusters of galaxies characterized by a double X-ray surface brightness and thus mass distribution are presented. The clusters A98, A115, A1750 and SC 0627-54 were found to exhibit two enhancements in their X-ray surface brightness distributions in observations made with the Einstein Imaging Proportional Counter. Calculations of the probability that the clusters represent chance superpositions indicate that the double clusters are physically associated. The radial distributions of the components are inconsistent with those of single point sources, and have been used to derive cluster luminosities which are typical of rich clusters. Masses of the subclusters are also found to be typical of bound and virialized clusters with gas contributing 10%. Within the framework of the hierarchical theory of galactic clustering, the double clusters are suggested to represent an intermediate evolutionary stage before the merger of subclusters into a relaxed Coma-type cluster.

Forman, W.↗

Einstein imaging observations of clusters of galaxies

X-ray observations suggest a broad division between clusters having a centrally-located, X-ray dominant galaxy characterized by a centrally-peaked X-ray emission, and clusters with a broader X-ray profile. Within these categories, such evolutionary indicators as X-ray temperature, vorticity dispersion, spiral fraction and central galaxy density may indicate the relative stages of evolution. X-ray imaging observations are presented for (1) the Virgo cluster, (2) other dynamically unevolved clusters, (3) double clusters which may be in an intermediate evolutionary stage, and (4) dynamically evolved clusters. The data are analyzed under the assumption of an isothermal X-ray gas which is gravitationally bound by galaxies and clusters.

Forman, W.↗

Illustration of year-to-year variation in wheat spectral profile crop growth curves

Data previously compiled on the year to year variability of spectral profile crop growth parameters for spring and winter wheat in Kansas, Oklahoma, and the Dakotas were used with a profile model to develop graphs illustrating spectral profile crop growth curves for a number of years and a number of spring and winter wheat segments. These curves show the apparent variability in spectral profiles for wheat from one year to another within the same segment and from one segment to another within the same year.

Gonzalez, P.↗

Multifuel rotary aircraft engine

The broad objectives of this paper are the following: (1) to summarize the Curtiss-Wright design, development and field testing background in the area of rotary aircraft engines; (2) to briefly summarize past activity and update development work in the area of stratified charge rotary combustion engines; and (3) to discuss the development of a high-performance direct injected unthrottled stratified charge rotary combustion aircraft engine. Efficiency improvements through turbocharging are also discussed.

Jones, C.↗

Advanced rotary engine studies

A review of rotary engine developments relevant to a stratified charge rotary aircraft engine is presented. Advantages in module size and weight, fuel efficiency, reliability, and multi-fuel capability are discussed along with developments in turbocharging, increased mean effective pressure, improved apex seal/trochoid wear surfacing materials, and high strength and temperature aluminum casting alloys. A carbureted prototype aircraft engine is also described.

Jones, C.↗