Engineering Papers⌕ Search

Engineering topics

Johnson, R. E.

Publications and source records attributed to Johnson, R. E..

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Study on application of aerospace technology to improve surgical implants

The areas where aerospace technology could be used to improve the reliability and performance of metallic, orthopedic implants was assessed. Specifically, comparisons were made of material controls, design approaches, analytical methods and inspection approaches being used in the implant industry with hardware for the aerospace industries. Several areas for possible improvement were noted such as increased use of finite element stress analysis and fracture control programs on devices where the needs exist for maximum reliability and high structural performance.

Johnson, R. E.↗
NASA NTRS1981

Lagrangian circulation study near Cape Henry, Virginia

A study of the circulation near Cape Henry, Virginia, was made using surface and seabed drifters and radar tracked surface buoys coupled to subsurface drag plates. Drifter releases were conducted on a line normal to the beach just south of Cape Henry. Surface drifter recoveries were few; wind effects were strongly noted. Seabed drifter recoveries all exhibited onshore motion into Chesapeake Bay. Strong winds also affected seabed recoveries, tending to move them farther before recovery. Buoy trajectories in the vicinity of Cape Henry appeared to be of an irrotational nature, showing a clockwise rotary tide motion. Nearest the cape, the buoy motion elongated to almost parallel depth contours around the cape. Buoy motion under the action of strong winds showed that currents to at least the depth of the drag plates substantially are altered from those of low wind conditions near the Bay mouth. Only partial evidence could be found to support the presence of a clockwise nontidal eddy at Virginia Beach, south of Cape Henry.

Johnson, R. E.↗
NASA NTRS1981

An automated system for global atmospheric sampling using B-747 airliners

The global air sampling program utilizes commercial aircrafts in scheduled service to measure atmospheric constituents. A fully automated system designed for the 747 aircraft is described. Airline operational constraints and data and control subsystems are treated. The overall program management, system monitoring, and data retrieval from four aircraft in global service is described.

Lew, K. Q.↗
NASA NTRS1981

Orbiter fuel cell improvement assessment

The history of fuel cells and the theory of fuel cells is given. Expressions for thermodynamic and electrical efficiencies are developed. The voltage losses due to electrode activation, ohmic resistance and ionic diffusion are discussed. Present limitations of the Orbiter Fuel Cell, as well as proposed enhancements, are given. These enhancements are then evaluated and recommendations are given for fuel cell enhancement both for short-range as well as long-range performance improvement. Estimates of reliability and cost savings are given for enhancements where possible.

Johnson, R. E.↗
NASA NTRS1981

Erosion of Galilean satellite surfaces by Jovian magnetosphere particles

The effects on the surfaces of the Galilean satellites Europa, Ganymede and Callisto of impacts by particles of the Jupiter magnetosphere in which they are immersed are estimated. Differential ion fluxes measured by the Voyager low-energy magnetosphere particle analyzer as a function of ion energy were used to calculate ice erosion fluxes for the satellites under the assumption that each is 50% ice covered. Calculations were performed on the basis of laboratory data concerning the ice sputtering coefficients of protons and oxygen ions of various energies. A water erosion rate of greater than 10 to the 10th/sq cm per sec is obtained for Europa, which implies a total erosion over 1 billion years of an ice layer 100 m deep. Atmospheric column densities of the H2O molecules sputtered from the surface but not escaping the satellites are also calculated for the three satellites assuming a sputtered ion temperature of 2000 K, and are found to dominate those produced by sublimation. Finally, estimates are presented of the source and loss processes for an oxygen atmosphere around Ganymede created by sputtering or sublimation.

Johnson, R. E.↗
NASA NTRS1978

Comment on ion and electron temperatures in the Martian upper atmosphere

Ion temperature profiles measured by the retarding potential analyzers on Viking I and II are examined. It is found that the thermal conduction must be modified by other transport processes or by the presence of magnetic fields to account for the observed profiles. Such processes also effect the electron temperature profile, which, however, was not measured. Estimates of the magnetic field parameters are obtained assuming the magnetic field is the dominant effect.

Johnson, R. E.↗
NASA NTRS1978

Chemical vapor deposition growth

The objective was to investigate and develop chemical vapor deposition (CVD) techniques for the growth of large areas of Si sheet on inexpensive substrate materials, with resulting sheet properties suitable for fabricating solar cells that would meet the technical goals of the Low Cost Silicon Solar Array Project. The program involved six main technical tasks: (1) modification and test of an existing vertical-chamber CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using impurity diffusion and other standard and near-standard processing techniques supplemented late in the program by the in situ CVD growth of n(+)/p/p(+) sheet structures subsequently processed into experimental cells.

Ruth, R. P.↗
NASA NTRS1976

Chemical vapor deposition growth

A laboratory type CVD reactor system with a vertical deposition chamber and sample pedestal heated by an external RF coil has been extensively modified by installation of mass flow controllers, automatic process sequence timers, and special bellows-sealed air-operated valves for overall improved performance. Various film characterization procedures, including classical metallography, SEM analyses, X ray diffraction analyses, surface profilometry, and electrical measurements (resistivity, carrier concentration, mobility, spreading resistance profiles, and minority-carrier lifetime by the C-V-t method) area used to correlate Si sheet properties with CVD parameters and substrate properties. Evaluation procedures and measurements are given. Experimental solar cell structures were made both in epitaxial Si sheet (on sapphire substrates) and in polycrystalline material on alumina substrates, the former to provide an indication of what might be an upper limit on performance of the latter. Preliminary results are given, as obtained in cell structures not specially designed to allow for the unique properties of the sheet material, and fabricated in material known to be far from optimum for photovoltaic performance. Low power conversion efficiencies have been obtained in the epitaxial as well as the polycrystalline Si sheet.

Ruth, R. P.↗
NASA NTRS1976

Potential structural material problems in a hydrogen energy system

Potential structural material problems that may be encountered in the three components of a hydrogen energy system - production, transmission/storage, and utilization - have been identified. Hydrogen embrittlement, corrosion, oxidation, and erosion may occur during the production of hydrogen. Hydrogen embrittlement is of major concern during both transmission and utilization of hydrogen. Specific materials research and development programs necessary to support a hydrogen energy system are described. An awareness of probable shortages of strategic materials has been maintained in these suggested programs.

Gray, H. R.↗
NASA NTRS1975

Materials considerations

Materials problems are examined that may be encountered within a hydrogen energy system. Emphasis is placed on hydrogen embrittlement, corrosion, oxidation, and erosion. Other factors discussed include: degradation of mechanical properties of structural alloys, system reliability, and maintenance costs.

Gray, H. R.↗
NASA NTRS1975

Drogue performance evaluation. Part 1: Data acquisition

Surface buoy/subsurface drogue drag coupling was investigated. Data acquisition methods and techniques derived from several experimental cruises on the Chesapeake Bay are presented. Four buoys were utilized: three coupled to steel plates rigidly attached to each other at right angles and at various depths; and one spar type that did not require drag plates. Data from these surface floats and the drogue depth combinations were processed. Errors in tracking the surface buoys are discussed.

Johnson, R. E.↗
NASA NTRS1975

Potential structural material problems in a hydrogen energy system

Potential structural material problems that may be encountered in the three components of a hydrogen energy system - production, transmission/storage, and utilization - were identified. Hydrogen embrittlement, corrosion, oxidation, and erosion may occur during the production of hydrogen. Hydrogen embrittlement is of major concern during both transmission and utilization of hydrogen. Specific materials research and development programs necessary to support a hydrogen energy system are described.

Gray, H. R.↗
NASA NTRS1973

Apollo experience report: The problem of stress-corrosion cracking

Stress-corrosion cracking has been the most common cause of structural-material failures in the Apollo Program. The frequency of stress-corrosion cracking has been high and the magnitude of the problem, in terms of hardware lost and time and money expended, has been significant. In this report, the significant Apollo Program experiences with stress-corrosion cracking are discussed. The causes of stress-corrosion cracking and the corrective actions are discussed, in terminology familiar to design engineers and management personnel, to show how stress-corrosion cracking can be prevented.

Johnson, R. E.↗
NASA NTRS1972

Development of methods for fracture control of space shuttle structures

The technology with respect to fracture control requirements of the shuttle is considered. The current state-of-the-art does permit an approach based on linear elastic fracture mechanics concepts. Development and implementation of a fracture control plan should recognize deficiencies and provide adequate resources for the extensive empirical test data which are required. With respect to the cost impact of such tests, recent experiences involving advanced aircraft systems have seen unit cost increases of from 200 to 500 percent.

Smith, G. T.↗
NASA NTRS1970

Modified faceplate assembly for stud-welding gun

Ventilated barrel assembly aids installation of studs on narrow uneven weld lands. The modified faceplate permits proper aligning of the percussion stud-welding gun in any position and on a smaller surface, and it maintains gap setting without any other adjustment.

Johnson, R. E.↗