Engineering Papers⌕ Search

Engineering topics

Johnson, D. R.

Publications and source records attributed to Johnson, D. R..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Deformation and fracture of a directionally solidified NiAl-28Cr-6Mo eutectic alloy

A directionally solidified alloy based on the NiAl-(Cr, Mo) eutectic was examined by transmission and scanning electron microscopy to characterize the microstructure and room temperature deformation and fracture behavior. The microstructure consisted of a lamellar morphology with a group of zone axes (111) growth direction for both the NiAl and (Cr, Mo) phases. The interphase boundary between the eutectic phases was semicoherent and composed of a well-defined dislocation network. In addition, a fine array of coherent NiAl precipitates was dispersed throughout the (Cr, Mo) phase. The eutectic morphology was stable at 1300 K with only coarsening of the NiAl precipitates occurring after heat treatment for 1.8 ks (500 h). Fracture of the aligned eutectic is characterized primarily by a crack bridging/renucleation mechanism and is controlled by the strength of the semicoherent interface between the two phases. However, contributions to the toughness of the eutectic may arise from plastic deformation of the NiAl phase and the geometry associated with the fracture surface.

Chen, X. F.↗
NASA NTRS1995

The mesoscale forcing of a midlatitude upper-tropospheric jet streak by a simulated convective system. 1: Mass circulation and ageostrophic processes

The mutual forcing of a midlatitude upper-tropospheric jet streak by organized mesoscale adiabatic and diabatic processes within a simulated convective system (SCS) is investigated. Using isentropic diagnostics, results from a three-dimensional numerical simulation of an SCS are examined to study the isallobaric flow field, modes of dominant ageostrophic motion, and stability changes in relation to the mutual interdependence of adiabatic processes and latent heat release. Isentropic analysis affords an explicit isolation of a component of isallobaric flow associated with diabatic processes within the SCS. Prior to convective development within the simulations, atmospheric destabilization occurs through adiabatic ageostrophic mass adjustment and low-level convergence in association with the preexisting synoptic-scale upper-tropospheric jet streak. The SCS develops in a baroclinic zone and quickly initiates a vigorous mass circulation. By the mature stage, a pronounced vertical couplet of low-level convergence and upper-level mass divergence is established, linked by intense midtropospoheric diabatic heating. Significant divergence persists aloft for several hours subsequent to SCS decay. The dominant role of ageostrophic motion within which the low-level mass convergence develops is the adiabatic isallobaric component, while the mass divergence aloft develops principally through the diabatic isallobaric component. Both compnents are intrinsically linked to the convectively forced vertical mass transport. The inertial diabatic ageostrophic component is largest near the level of maximum heating and is responsible for the development of inertial instability to the north of SCS, resulting in this quadrant being preferred for outflow. The inertial advective component, the dominant term that produces the new downstream wind maximum, rapidly develops north of the SCS and through mutual adjustment creates the baroclinic support for the new jet streak.

Wolf, Bart J.↗
NASA NTRS1995

The mesoscale forcing of a midlatitude upper-tropospheric jet streak by a simulated convective system. 2: Kinetic energy and resolution analysis

A kinetic energy (KE) analysis of the forcing of a mesoscale upper-tropospheric jet streak by organized diabatic processes within the simulated convective system (SCS) that was discussed in Part 1 is presented in this study. The relative contributions of the ageostrophic components of motion to the generation of KE of the convectively generated jet streak are compared, along with the KE generation by the rotational (nondivergent) and irrotational (divergent) mass transport. The sensitivity of the numerical simulations of SCS development to resolution is also briefly examined. Analysis within isentropic coordinates provides for an explicit determination of the influence of the diabatic processes on the generation of KE. The upper-level production of specific KE is due predominatly to the inertial advective ageostrophic component (IAD), and as such represents the primary process through which the KE of the convectively generated jet streak is realized. A secondary contribution by the inertial diabatic (IDI) term is observed. Partitioning the KE generation into its rotational and irrotational components reveals that the latter, which is directly linked to the diabatic heating within the SCS through isentropic continuity requirements, is the ultimate source of KE generation as the global area integral of generation by the rotational component vanishes. Comparison with an identical dry simulation reveals that the net generation of KE must be attributed to latent heating. Both the IAD and IDI ageostrophic components play important roles in this regard. Examination of results from simulations conducted at several resolutions supports the previous findings in that the effects of diabatic processes and ageostrophic motion on KE generation remain consistent. Resolution does impact the location and timing of SCS development, a result that has important implications in forecasting the onset of convection that develops from evolution of the large-scale flow and moisture transport. Marked differences are observed in the momentum field aloft subsequent to the life cycle of the SCS in the 1 deg, 30-level base case (MP130) simulation discussed in Part 1 versus its 2 deg counterparts in that the MP130 simulation with higher spatial resolution contains from 14% to 30% more total KE.

Wolf, Bart J.↗
NASA NTRS1995

NiAl-based Polyphase in situ Composites in the NiAl-Ta-X (X = Cr, Mo, or V) Systems

Polyphase in situ composites were generated by directional solidification of ternary eutectics. This work was performed to discover if a balance of properties could be produced by combining the NiAl-Laves phase and the NiAl-refractory metal phase eutectics. The systems investigated were the Ni-Al-Ta-X (X = Cr, Mo, or V) alloys. Ternary eutectics were found in each of these systems and the eutectic composition, temperature, and morphology were determined. The ternary eutectic systems examined were the NiAl-NiAlTa-(Mo, Ta), NiAl-(Cr, Al) NiTa-Cr, and the NiAl-NiAlTa-V systems. Each eutectic consists of NiAl, a C14 Laves phase, and a refractory metal phase. Directional solidification was performed by containerless processing techniques in a levitation zone refiner to minimize alloy contamination. Room temperature fracture toughness of these materials was determined by a four-point bend test. Preliminary creep behavior was determined by compression tests at elevated temperatures, 1100-l400 K. Of the ternary eutectics, the one in the NiAl-Ta-Cr system was found to be the most promising. The fracture toughness of the NiAl-(Cr, Al)NiTa-Cr eutectic was intermediate between the values of the NiAl-NiAlTa eutectic and the NiAl-Cr eutectic. The creep strength of this ternary eutectic was similar to or greater than that of the NiAl-Cr eutectic.

Johnson, D. R.↗
NASA NTRS1995

Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

Johnson, D. R.↗
NASA NTRS1994

Processing and Mechanical Properties of Directionally Solidified NiAl/NiAlTa Alloys

Promising creep strengths were found for a directionally solidified NiAl-NiAlTa alloy when compared to other NiAl based intermetallics. The directionally solidified alloy had an off-eutectic composition that resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The room temperature toughness of the two phase alloy was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa. Alloying additions that may improve the room temperature toughness by producing multiphase alloys are discussed.

Johnson, D. R.↗
NASA NTRS1993

Containerless automated processing of intermetallic compounds and composites

An automated containerless processing system has been developed to directionally solidify high temperature materials, intermetallic compounds, and intermetallic/metallic composites. The system incorporates a wide range of ultra-high purity chemical processing conditions. The utilization of image processing for automated control negates the need for temperature measurements for process control. The list of recent systems that have been processed includes Cr, Mo, Mn, Nb, Ni, Ti, V, and Zr containing aluminides. Possible uses of the system, process control approaches, and properties and structures of recently processed intermetallics are reviewed.

Johnson, D. R.↗
NASA NTRS1991

The dynamics and energetics of midlatitude western boundary currents: A comparison of the Kuroshio Extension and the Gulf Stream

We will use TOPEX/POSEIDON altimetry in combination with ongoing and planned efforts, including data from the European Remote Sensing satellite (ERS-1), in situ measurements designed specifically to complement satellite altimetry, and assimilation of these several data types into eddy-resolving numerical models in order to understand the dynamics and energetics of midlatitude western boundary currents (specifically, the Gulf Stream and the Kuroshio Extension). A better understanding of the recirculation of midlatitude gyres can best be undertaken in the format of such regional, eddy-resolving experiments. Such regional programs will enhance and be enhanced by the larger scale circulation studies of the World Ocean Circulation Experiment (WOCE) as well as by global-scale eddy-resolving models that we will develop prior to the TOPEX/POSEIDON mission. This effort includes participation on the TOPEDX/POSEIDON Science Team.

Mitchell, James L.↗
NASA NTRS1986

A case study of GWE satellite data impact on GLA assimilation analyses of two ocean cyclones

The effects of the Global Weather Experiment (GWE) data obtained on January 18-20, 1979 on Goddard Laboratory for Atmospheres assimilation analyses of simultaneous cyclones in the western Pacific and Atlantic oceans are examined. The ability of satellite data within assimilation models to determine the baroclinic structures of developing extratropical cyclones is evaluated. The impact of the satellite data on the amplitude and phase of the temperature structure within the storm domain, potential energy, and baroclinic growth rate is studied. The GWE data are compared with Data Systems Test results. It is noted that it is necessary to characterize satellite effects on the baroclinic structure of cyclone waves which degrade numerical weather predictions of cyclogenesis.

Gallimore, R. G.↗
NASA NTRS1985

The planetary distribution of heat sources and sinks during FGGE

Heating distributions from analysis of the National Meteorological Center and European Center for Medium Range Weather Forecasts data sets; methods used and problems involved in the inference of diabatic heating; the relationship between differential heating and energy transport; and recommendations on the inference of heat soruces and heat sinks for the planetary show are discussed.

Johnson, D. R.↗
NASA NTRS1985

Voyager 0.2-lbf thruster valve assembly short pulse test report

The short pulse width testing completed on the Voyager 0.2-lbf thruster value assemblies (T/VA's) and the disassembly and inspection of T/VA S/N 020 is reported. The purpose for performing the short pulse width testing on Voyager 0.2-lbf thruster valve assemblies (T/VA's) was to determine: (1) impulse bit versus electrical pulse width; (2) impulse bit variations versus electrical pulse width; and (3) whether the short pulses decrease thruster life.

Johnson, D. R.↗
NASA NTRS1984

Some New Mathematical Methods for Variational Objective Analysis

New and/or improved variational methods for simultaneously combining forecast, heterogeneous observational data, a priori climatology, and physics to obtain improved estimates of the initial state of the atmosphere for the purpose of numerical weather prediction are developed. Cross validated spline methods are applied to atmospheric data for the purpose of improved description and analysis of atmospheric phenomena such as the tropopause and frontal boundary surfaces.

Wahba, G.↗
NASA NTRS1984

Energy Diagnostics and Impact Studies of FGGE Global Data Sets and GLAS GCM Simulations

An analysis of a case study of the favorable impact of satellite data assimilation on model cyclone prediction is discussed. Also discussed is the isolation of systematic biases in the vertical structure of satellite derived temperatures which in all probability negatively impact the prediction of ocean cyclones during periods of rapid baroclinic amplification. Access to CYBER 205 and transfer of software for Eulerian and quasi-Lagrangian diagnostic studies of atmospheric circulation are discussed.

Johnson, D. R.↗
NASA NTRS1984

Mesoscale ageostrophic circulations associated with baroclinic jet streaks

Studies of ageostrophic motion attending jet streaks and convection are examined. Various types of dynamical experiments are carried out with the hybrid isentropic-sigma coordinate model. The effects of vorticity and static stability distributions on the intensity of secondary circulations forced by inertial accelerations as well as the superposition of an amplifying baroclinic wave on the jet streak structure are investigated.

Johnson, D. R.↗
NASA NTRS1984

Effects of diabatic heating on the ageostrophic circulation of an upper tropospheric jet streak

Higher temporal resolution data from NASA's fourth Atmospheric Variability Experiment (April 24-25, 1975) are used to study the role of diabatic heating within the convective region in altering the ageostrophic mass circulation in the entrance region of the jet streak. The modifying effect this diabatic heating in the mesoscale storm exerts on the synoptic-scale environmental flow through dynamical mechanisms which link the mass circulation of these two scales is examined. The effect of diabatic heating on the ageostrophic motion within the thermally direct circulation of the jet streak and the mesoscale convective complexes is investigated. Diabatic modes of ageostrophic motion that intensify the upper tropospheric jet streak downstream are identified.

Keyser, D. A.↗
NASA NTRS1984

The inducement of planetary boundary layer mass convergence associated with varying vorticity beneath tropospheric wind maximum

The effects of the vorticity distribution are applied to study planetary boundary layer mass convergence beneath free tropospheric wind maximum. For given forcing by viscous and pressure gradient forces beneath a wind maximum, boundary layer cross stream mass transport is increased by anticyclonic vorticity on the right flank and decreased by cyclonic vorticity on the left flank. Such frictionally forced mass transport induces boundary layer mass convergence beneath the relative wind maximum. This result is related to the empirical rule that the most intense convection and severe weather frequently develop beneath the 500 mb zero relative vorticity isopleth.

Johnson, D. R.↗
NASA NTRS1984

A quasi-Lagrangian diagnostic case study of the effect of satellite sounding data assimilation on model cyclone prediction

A quasi-Lagrangian diagnostic study was performed to compare weather forecast accuracy with and without use of satellite data. Attention was focused on the mass and angular momentum budgets of the cyclone. The diagnostic study isolated the effects of physical processes within a cyclone and the effects of transport processes moving with the cyclone. Satellite data furnished different initialization values for horizontal mass and eddy angular momentum. Colder temperatures and weaker stabilities in the NW quadrant lower layers in the budget volume and increased stability in the middle and lower layers of another quadrant were obtained when the satellite data were considered. The addition of satellite data was concluded to have enhanced the accuracy of the forecast.

Vergin, J. M.↗