Engineering Papers⌕ Search

Engineering topics

Johnson, D. A.

Publications and source records attributed to Johnson, D. A..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

An investigation of transonic turbulent boundary layer separation generated on an axisymmetric flow model

Experimental data are presented describing the transonic turbulent separated flow generated by an axisymmetric flow model. The model consisted of a circular-arc bump affixed to a straight circular cylinder aligned with the flow direction. Measurements of the mean velocity, turbulence intensity, and Reynolds shear stress profiles were made in the separated flow. These data revealed the dramatic changes in the shear stress levels as the flow passed from the interaction through to reattachment. Information on the behavior of the turbulence reaction to the imposed pressure gradients, as presented in this investigation, will be required for the development of the turbulence models used in predicting nonequilibrium turbulent flow fields.

Bachalo, W. D.↗
NASA NTRS1979

Transonic flow past a symmetrical airfoil at high angle of attack

The results of an experimental investigation of shock-induced stall and leading-edge stall on a 64A010 airfoil section are presented. Advanced nonintrusive techniques - laser velocimetry, holographic interferometry, and buried-wire anemometry - were used in characterizing the inviscid and viscous flow regions. The measurements include Mach contours of the inviscid flow regions, and mean velocity, flow direction and Reynolds shear stress profiles in the separated regions. The experimental observations of this study are relevant to efforts to improve surface pressure prediction methods for airfoils at or near stall.

Johnson, D. A.↗
NASA NTRS1979

Investigation of Turbulent Boundary-Layer Separation Using Laser Velocimetry

Boundary-layer measurements realized by laser velocimetry are presented for a Much 2.9, two-dimensional, shock-wave/turbulent boundary-layer interaction containing an extensive region of separated flow. Mean velocity and turbulent intensity profiles were obtained from upstream of the interaction zone to downstream of the mean reattachment point. The superiority of the laser velocimeter technique over pressure sensors in turbulent separated flows is demonstrated by a comparison of the laser velocimeter data with results obtained from local pilot and static pressure measurements for the same flow conditions. The locations of the mean separation and reattachment points as deduced from the mean velocity measurements are compared to oil-now visualization results. Representative velocity probability density functions obtained in the separated now region are also presented. Critical to the success of this investigation were: the use of Bragg cell frequency shifting and artificial seeding of the now with submicron light-scattering particles.

Modarress, D.↗
NASA NTRS1979

Laser velocimetry and holographic interferometry measurements in transonic flows

Measurements of the transonic flow about a two-dimensional airfoil have been made with holographic interferometry and laser velocimetry. Quantitative data obtained with the interferometer are compared to the laser velocimeter and surface pressure measurements to evaluate the accuracy of the technique. Good agreement in the results confirmed the two-dimensionality of the flow and the potential of the interferometer in making unsteady transonic flow measurements in the future.

Bachalo, W. D.↗
NASA NTRS1978

Transonic flow about a two-dimensional airfoil inviscid and turbulent flow properties.

Flow-field measurements are presented for a symmetrical NACA 64A010 airfoil section at transonic conditions. Measurements were obtained for three angles of attack with the free-stream Mach number fixed at 0.8. The cases studied included a weak shock wave/boundary layer interaction, an interaction of medium strength with mild separation, and an interaction of sufficient strength to produce a shock-induced stall situation. Two nonintrusive optical techniques, laser velocimetry and holographic interferometry, were used to characterize the flows. The results include Mach number contours and flow angle distributions in the inviscid flow regions, and turbulent flow properties, including the turbulent Reynolds stresses, of the upper surface viscous layers, and of the near-wake. The turbulent flow measurements reveal that the turbulence fluctuations attain equilibrium with the local mean flow much faster than previously expected.

Johnson, D. A.↗
NASA NTRS1978

Measurements of unsteady vortex flow fields

A combined surface hot film and laser velocimeter measurement technique, used to obtain new information on the mean, constant phase-averaged and turbulent structure of time-dependent flow fields, is described. Data obtained in a cylinder wake are presented, and its structure in both the Eulerian and Lagrangian frames is discussed. Turbulence data obtained by conventional and conditional averaging of the velocity fluctuations are also presented. These data provide details of the small- and large-scale contributions to the total turbulent field.

Owen, F. K.↗
NASA NTRS1978

Wake vortex measurements of bodies at high angle of attack

Three-dimensional laser velocimeter measurements have been made of the wake vortices of a slender tangent-ogive body which had nose and body fineness ratios of 3.5 and 12, respectively. Data were obtained for an angle of attack to seminose angle ratio of 2.3 at a free-stream Mach number of 0.6 and unit Reynolds number of 2 million/ft. Details of the mean flow field are presented and features of the turbulent and unsteady nature of the vortex flow field are discussed. Problems associated with obtaining meaningful vortex measurements in high-speed flows are addressed.

Owen, F. K.↗
NASA NTRS1978

Holography and LDV techniques, their status and use in airfoil research

The measurement capabilities of laser velocimetry and holographic interferometry in transonic airfoil testing were demonstrated. Presented are representative results obtained with these two nonintrusive techniques on a 15.24 cm chord airfoil section. These results include the density field about the airfoil, flow angles in the inviscid flow and viscous flow properties including the turbulent Reynolds stresses. The accuracies of the density fields obtained by interferometry were verified from comparisons with surface pressure and laser velocimeter measurements.

Johnson, D. A.↗
NASA NTRS1977

Experiments on transonic and supersonic turbulent boundary-layer separation

Results of experimental investigations into turbulent boundary-layer behavior under the influence of pressure gradients and with separation are presented for transonic and supersonic flow fields. In the transonic case, an axisymmetric model was implemented consisting of an annular circular arc bump affixed to a circular cylinder aligned with the flow direction. For the supersonic separation study, an oblique shock wave impinging on the wind tunnel wall boundary layer was employed to cause separation. The mean streamwise and normal velocity components as well as the respective turbulence intensities were obtained with a two-color frequency shifted laser velocimeter.

Bachalo, W. D.↗
NASA NTRS1976

Turbulence measurements in a transonic boundary layer and free-shear flow using laser velocimetry and hot-wire anemometry techniques

Quantitative measurements of the turbulence fluctuations in velocity and mass flux have been obtained in Mach 0.6 and 0.8 turbulent boundary layer and free-shear layer flows by laser velocimetry and hot-wire anemometry techniques. To evaluate the effects of compressibility, these transonic data are compared to available incompressible and supersonic results. Based on some simplifying assumptions, estimates of the rms density fluctuations are made for which error bounds are given. In addition to these fluctuation data, the compressible mean velocity data obtained with the laser velocimeter are presented and compared to pitot tube results. The investigation was conducted in the Ames 6- by 6-Foot Supersonic Wind Tunnel at free-stream Mach numbers of 0.6 and 0.8 for a unit Reynolds number of about 10,000,000 per meter.

Johnson, D. A.↗
NASA NTRS1976

Investigation of shock-induced separation of a turbulent boundary layer using laser velocimetry

Boundary-layer measurements realized by laser velocimetry are presented for a Mach 2.9, two-dimensional, shock-wave/turbulent boundary-layer interaction containing an extensive region of separated flow. Mean velocity and turbulent intensity profiles were obtained from upstream of the interaction zone to downstream of the mean reattachment point. The superiority of the laser velocimeter technique over pressure sensors in turbulent separated flows is demonstrated by a comparison of the laser velocimeter data with results obtained from local pitot and static pressure measurements for the same flow conditions. The locations of the mean separation and reattachment points as deduced from the mean velocity measurements are compared to oil-flow visualization results. Representative, velocity probability density functions obtained in the separated flow region are also presented. Critical to the success of this investigation were: (1) the use of Bragg cell frequency shifting and (2) artificial seeding of the flow with submicron light-scattering particles.

Modarress, D.↗
NASA NTRS1976

Laser velocimetry applied to transonic and supersonic aerodynamics

As a further demonstration of the capabilities of laser velocity in compressible aerodynamics, measurements obtained in a Mach 2.9 separated turbulent boundary layer and in the transonic flow past a two-dimensional airfoil section are presented and compared to data realized by conventional techniques. In the separated-flow study, the comparisons were made against pitot-static pressure data. Agreement in mean velocities was realized where the pressure measurements could be considered reliable; however, in regions of instantaneous reverse velocities, the laser results were found to be consistent with the physics of the flow whereas the pressure data were not. The laser data obtained in regions of extremely high turbulence suggest that velocity biasing does not occur if the particle occurrence rate is low relative to the turbulent fluctuation rate. Streamwise turbulence intensities are also presented. In the transonic airfoil study, velocity measurements obtained immediately outside the upper surface boundary layer of a 6-inch chord MACA 64A010 airfoil are compared to edge velocities inferred from surface pressure measurements. For free-stream Mach numbers of 0.6 and 0.8, the agreement in results was very good. Dual scatter optical arrangements in conjunction with a single particle, counter-type signal processor were employed in these investigations. Half-micron-diameter polystyrene spheres and naturally occurring condensed oil vapor acted as light scatterers in the two respective flows. Bragg-cell frequency shifting was utilized in the separated flow study.

Johnson, D. A.↗
NASA NTRS1976

Laser velocimetry applied to transonic and supersonic aerodynamics

Measurements obtained with laser velocimetry in a Mach 2.9 separated turbulent boundary layer and in the transonic flow past a two-dimensional airfoil section are presented and compared to data realized by conventional techniques. Agreement in mean velocities was realized where the pressure measurements could be considered reliable; however, in regions of instantaneous reverse velocities, the laser results were found to be consistent with the physics of the flow whereas the pressure data were not. Streamwise turbulence intensities are also presented. In the transonic airfoil study, velocity measurements obtained immediately outside the upper surface boundary layer of a 6-inch chord NACA 64A010 airfoil are compared to edge velocities inferred from surface pressure measurements. For free-stream Mach numbers of 0.6 and 0.8, the agreement in results was very good. "Dual scatter" optical arrangements in conjunction with a single particle, counter-type signal processor were employed in these investigations.

Johnson, D. A.↗
NASA NTRS1976

Laser velocimeter supersonic and transonic wind tunnel studies

Wind tunnel investigations of a shock-induced separated flow and the flow about a two-dimensional airfoil section at transonic speeds using laser velocimetry techniques are described. Laser velocimeter data are presented and compared with conventional pressure type measurements (pitot and static pressure probe measurements for the shock-induced separation, and surface pressure measurements for the two-dimensional airfoil section). In addition to these data comparisons, a simple optical arrangement for the incorporation of a Bragg cell in a laser velocimeter system is described. The effects of particle concentration gradients within a turbulent boundary layer on laser velocimeter measurements are also demonstrated.

Johnson, D. A.↗
NASA NTRS1975

Laser velocimeter measurements of high-speed compressible flows

Laser velocimeter results were compared and found to be consistent with those obtained with conventional measurement techniques and existing compressible boundary layer theory. Turbulence information at supersonic speed has been successfully obtained in compressible boundary layer with laser system.

Johnson, D. A.↗
NASA NTRS1974

Turbulence measurements in a Mach 2.9 boundary layer using laser velocimetry

Measurements taken in a Mach-2.9 turbulent boundary layer are shown to demonstrate the ability of a laser velocimeter to measure the turbulence transport properties of high-speed compressible flows. This demonstrated ability, combined with the nonperturbing quality and relative insensitivity to environmental conditions of the laser velocimeter, opens the way to compressible flow measurements never considered possible with more conventional measurement techniques.

Johnson, D. A.↗
NASA NTRS1974

Turbulent measurements in supersonic boundary layer flows using laser velocimetry

Laser velocimetry has been applied successfully in the measurement of mean velocities and Reynolds stresses in a zero pressure gradient, Mach 2.9 boundary layer, and upstream and downstream of a two-dimensional, shock-wave boundary layer interaction for the same Mach number. The Reynolds stresses were obtained using a one-component, dual-scatter laser velocimeter operated in a manner analogous to the 'slanted hot-wire' technique. Signal processing was of the single-particle counting type which permitted measurements to be made using only the naturally occurring particles in the tunnel air stream for light scattering. The results for the shock-wave boundary layer interaction are presented along with hot-wire anemometer and pitot-static pressure measurements obtained in the same flow. Also, a data acquisition scheme for use with a two-component laser velocimeter is presented which should provide even better accuracies in future studies.

Johnson, D. A.↗