Engineering Papers⌕ Search

Engineering topics

Johns, Owen

Publications and source records attributed to Johns, Owen.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Novel subnanosecond rise, flattop, 100 kV high voltage pulse generator (ASAP-LDRD-22-0122)

We looked to build a new type of 100 kV pulse generator that we hope will avoid many of the problems seen with other commercially available pulse generators. We looked to exploit recent improvements in both lasers and solid-state pulse charge units along with an alternative triggering layout to build something new. For the pulse charging unit, we collaborated with Texas Tech to leverage their knowledge and expertise in pulse transformers and solid-state switching. The final result of the LDRD looks promising. Texas Tech was able to build a pulse charge unit that meets our specifications regarding output, and we were able to integrate it with a switch and a laser to create a device that meets the goals of the LDRD. There is still much work to do to advance the design further and improve reliability, but the proto-type design satisfies the goals we set for this LDRD.

42 ENGINEERING↗
DOE OSTI2020

Photonic-crystal-fiber-delivered laser-triggered high-voltage gas switch

A photonic-crystal-fiber-delivered laser-triggered high-voltage gas switch can deliver a peak irradiance of greater than 5.1×1011 W/cm2 to the AK gap for a laser having a wavelength of 1064 nm. The switch is capable of operating at pressures up to 2200 psi; voltages across the gap of greater than 200 kV; operation at less than 70% self-break voltage; shot-to-shot jitter of less than 3 ns; AK gap distances of 3 mm or smaller; and triggering via a fiber-delivered laser pulse energy of as low as 500 μJ.

42 ENGINEERING↗
DOE OSTI2016

Fusion-neutron measurements for magnetized liner inertial fusion experiments on the Z accelerator

Several magnetized liner inertial fusion (MagLIF) experiments have been conducted on the Z accelerator at Sandia National Laboratories since late 2013. Measurements of the primary DD (2.45 MeV) neutrons for these experiments suggest that the neutron production is thermonuclear. Primary DD yields up to 3e12 with ion temperatures ~2-3 keV have been achieved. Measurements of the secondary DT (14 MeV) neutrons indicate that the fuel is significantly magnetized. Measurements of down-scattered neutrons from the beryllium liner suggest ρR liner ~ 1g/cm 2 . Neutron bang times, estimated from neutron time-of-flight (nTOF) measurements, coincide with peak x-ray production. Furthermore, plans to improve and expand the Z neutron diagnostic suite include neutron burn-history diagnostics, increased sensitivity and higher precision nTOF detectors, and neutron recoil-based yield and spectral measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗