Microbial reduction of Fe(III) in smectite minerals by thermophilic methanogen Methanothermobacter thermautotrophicus
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Jing, Zhang.
Explore the source record for details and available documents.
The discharge characteristics and mechanism of glow discharges in atmospheric pressure helium excited by repetitive voltage pulses with and without dielectric barriers are numerically studied using a one-dimensional self-consistent fluid model. The waveforms of discharge current density show that one discharge event occurs during the voltage pulse with bare electrodes and two distinct discharge events happen at the rising and falling phases of voltage pulse with dielectric barrier electrodes, respectively. The spatial profiles of electron and electric field at the time instant of discharge current peak reveal that the electrons are trapped in the plasma bulk with bare electrodes, while the electrons are accumulated in the region between the sheath and plasma bulk with dielectric barrier electrodes. Furthermore, the spatio-temporal evolution of electron density and mean electron energy clearly demonstrate the dynamics of discharge ignition, especially the temporal evolution of sheath above the instantaneous cathode.
The electronic structure and optical properties of TiCoSb are studied by the first-principles calculation. It is found that the band gaps increase with the pressure increasing. It is noted that the increase of the band gap is due to the electrons of Ti 3d and Co 3d of the valence band (VB) shifting away from the Fermi level. Our calculation indicates that TiCoSb has the large density of state near the Fermi level; moreover, the changes of the density of states near the Fermi level mainly are caused by Ti 3d and Co 3d under the different pressures. It is noted that the absorption edge increases with an increase of pressure. As pressure increases, the static dielectric constants {epsilon}{sub 1}(0) decrease. All peaks of the imaginary part of the dielectric function {epsilon}{sub 2}({omega}) move towards higher energies within increasing pressure. - Graphical abstract: The first peak positions of the absorption spectrum increase and shift the high energy with an increase of pressure. The buleshift of the absorption edge could be observed. Highlights: Black-Right-Pointing-Pointer It is noted that the increase of the band gap is due to the electrons of Ti 3d and Co 3d of VB moving away from the Fermi level. Black-Right-Pointing-Pointer It is noted that the absorption edge increases with an increase of pressure. Black-Right-Pointing-Pointer As pressure increases, the static dielectric constant {epsilon}{sub 1}(0) decreases. Black-Right-Pointing-Pointer All peaks of the imaginary part of the dielectric function {epsilon}{sub 2}({omega}) move to wards higher energies within creasing pressure.
Using two crossed 1064-nm optical-dipole-trap lasers to be the Raman beams, an effective vector gauge potential for Bose-Einstein condensed {sup 87}Rb in the F=2 hyperfine ground state is experimentally created. The moderate strength of the Raman coupling still can be achieved when the detuning from atomic resonance is larger than the excited-state fine structure, since rubidium has 15 nm energy-level spitting. The atoms at the far detuning of the Raman coupling are loaded adiabatically into the dressed states by ramping the homogeneous bias magnetic field with different paths and the dressed states with different energies are studied experimentally. The experimental scheme can be easily extended to produce the synthetic magnetic or electric field by means of a spatial or time dependence of the effective vector potential.
We demonstrate collective atomic recoil motion with a dilute, ultracold, degenerate fermion gas in a single spin state. By utilizing an adiabatically decompressed magnetic trap with an aspect ratio different from that of the initial trap, a momentum-squeezed fermion cloud is achieved. With a single pump pulse of the proper polarization, we observe, for the first time, multiple wave-mixing processes that result in distinct collective atomic recoil motion modes in a degenerate fermion cloud. Contrary to the case with Bose condensates, no pump-laser detuning asymmetry is present.
We investigate continuous-variable (CV) multipartite unlockable bound entangled states. Comparing with the qubit multipartite unlockable bound entangled states, CV multipartite unlockable bound entangled states present some new and different properties. CV multipartite unlockable bound entangled states may serve as a useful quantum resource for new multiparty communication schemes. The experimental protocol for generating CV unlockable bound entangled states is proposed with a setup that is, at present, accessible.
Graded and nongraded FePt:C(hard)/Fe(soft) films with different structures are fabricated by magnetron sputtering and postannealing. Due to the interdiffusion between FePt and C layers during the annealing process, films with a continuous variation in anisotropy are realized by varying the C concentration in the FePt hard layer. In comparison to the FePt/Fe bilayer, the coercivities of graded and nongraded films are effectively reduced. However, the mechanisms of reduction are different. Moreover, adding a nonmagnetic C layer not only tailors the gradient of anisotropy, but also weakens the intergranular exchange interaction.
The discharge mechanism of pulsed atmospheric pressure glow discharges excited by the unipolar positive voltage pulses between two parallel plate electrodes with or without one dielectric barrier on the ground electrode in flowing helium has been characterized by nanosecond time resolved optical and electrical measurements. The uniform glow discharges can only be achieved when the voltage pulse duration is less than 1 {mu}s with bare electrodes. With introducing a dielectric barrier on the ground electrode, a model of electrons traveling on the background ions between two discharge events is proposed to explain the discharge mechanism and characteristics in terms of discharge ignition, discharge spatial profile and discharge current amplitude.
The discharge dynamics of pin-to-plate dielectric barrier discharge was studied in atmospheric helium at 20 kHz. The discharge was predominately ignited in positive half cycle of applied voltage with sinusoidal waveform. The temporal evolution of the discharge was investigated vertically along the discharge gap and radically on the dielectric surface by time resolved imaging. It is found that a discharge column with a diameter of 2 mm was ignited above the pin electrode and expanded toward a plate electrode. On the dielectric surface with space charge accumulation, plasma disk in terms of plasma ring was formed with radius up to 25 mm. The expansion velocity of plasma ring can reach a hypersonic speed of 3.0 km/s. The ionization wave due to electron diffusion is considered to be the mechanism for plasma ring formation and dynamics.
Graphical rule, describing that any single-mode homodyne detection turns a given continuous-variable (CV) graph state into a new one, is presented. Employing two simple graphical rules--local complement operation and vertex deletion (single quadrature-amplitude x measurement)--the graphical rule for any single-mode quadrature component measurement can be obtained. The shape of CV weighted graph state may be designed and constructed easily from a given larger graph state by applying this graphical rule.
We find that feedback control may induce 'pseudo'-nonlinear dynamics in a damped harmonic oscillator, whose centroid trajectory in the phase space behaves like a classical nonlinear system. Thus, similar to nonlinear amplifiers (e.g., rf-driven Josephson junctions), feedback control on the harmonic oscillator can induce nonlinear bifurcation, which can be used to amplify small signals and further to measure quantum states of qubits. Using the cavity QED and the circuit QED systems as examples, we show how to apply our method to measuring the states of two-level atoms and superconducting charge qubits.
A physical model on dipole formation at high-k/SiO{sub 2} interface is proposed to study possible mechanism of flatband voltage (V{sub FB}) shift in metal-oxide-semiconductor device with high-k/metal gate structure. Dielectric contact induced gap states (DCIGS) on high-k or SiO{sub 2} side induced by high-k and SiO{sub 2} contact are assigned to dominant origin of dipole formation. DCIGS induced interface dipole is considered to cause V{sub FB} shift through charge transfer effect. Based on the proposed model, directions of dipoles at several high-k/SiO{sub 2} interfaces are predicted, and magnitudes of dipoles are approximately calculated. Both directions and magnitudes are in agreement with the reported results.
An experimental investigation is presented to characterize the dependence of discharge operation modes ({alpha} and {gamma} modes) and their transition on excitation frequency in radio-frequency atmospheric argon glow discharges. The current-voltage characteristics are used to distinguish the {alpha} and {gamma} modes at an excitation frequency range of 5-24 MHz. The operation regime of {alpha} mode with stable and uniform discharge in large volume is found to expand at higher excitation frequency. It is shown that, when excitation frequency is below 10 MHz, the discharge evolves directly into {gamma} mode after gas breakdown and, when excitation frequency is above 10 MHz, the discharge operates in the coexistence mode of {alpha} and {gamma} after mode transition.
An experimental study of radio-frequency (15 MHz) glow discharges in atmospheric helium modulated by pulses with repetition frequency of 500 kHz and duty cycle of 6% and 8% is presented in this paper. In each discharge burst, the discharge is restricted to operate in ignition phase with duration of one or two radio-frequency cycles. The ignition characteristics in terms of spatial-temporal evolution of discharge interelectrode structure and optical emission intensity are investigated by time resolved imaging. Optical emission intensities at lines of 706 and 777 nm are used to capture clearly the temporal evolution of energetic electrons and active specie of atom oxygen generated in discharge.
We study cooling and squeezing the fluctuations of a nanomechanical beam using quantum feedback control. In our model, the nanomechanical beam is coupled to a transmission line resonator via a superconducting quantum interference device. The leakage of the electromagnetic field from the transmission line resonator is measured using homodyne detection. This measured signal is then used to design a quantum feedback control signal to drive the electromagnetic field in the transmission line resonator. Although the control is imposed on the transmission line resonator, this quantum feedback control signal indirectly affects the thermal motion of the nanomechanical beam via the inductive beam-resonator coupling, making it possible to cool and squeeze the fluctuations of the beam, allowing it to approach the standard quantum limit.
When a two-qubit system is initially maximally entangled, two independent decoherence channels, one per qubit, would greatly reduce the entanglement of the two-qubit system when it reaches its stationary state. We propose a method on how to minimize such a loss of entanglement in open quantum systems. We find that the quantum entanglement of general two-qubit systems with controllable parameters can be controlled by tuning both the single-qubit parameters and the two-qubit coupling strengths. Indeed, the maximum fidelity F{sub max} between the stationary entangled state, {rho}{sub {infinity}}, and the maximally entangled state, {rho}{sub m}, can be about 2/3{approx_equal}max(tr({rho}{sub {infinity}}{rho}{sub m}))=F{sub max}, corresponding to a maximum stationary concurrence, C{sub max}, of about 1/3{approx_equal}C({rho}{sub {infinity}})=C{sub max}. This is significant because the quantum entanglement of the two-qubit system can be produced and kept, even for a long time. We apply our proposal to several types of two-qubit superconducting circuits and show how the entanglement of these two-qubit circuits can be optimized by varying experimentally controllable parameters.
In this paper, we use the method of calculus of variations to establish the existence of energy-minimizing radially symmetric magnetic monopole solutions in the general (4p-1)-dimensional Yang-Mills gauge field theory developed recently by Radu and Tchrakian. We also show that these solutions are either self-dual or anti-self-dual and, hence, unique. Our study extends the existence work of Belavin, Polyakov, Schwartz, and Tyupin and the equivalence and uniqueness work of Maison in three dimensions and the work of Yang in seven dimensions to the situation of arbitrary (4p-1) dimensions.
To strengthen the adhesion of platinum layer to counterelectrodes of dye sensitized solar cells, titanium thin film has been utilized as adhesion layer between platinum and substrate [Wei et al., Appl. Phys. Lett. 90, 153122 (2007)]. In our study, platinum/titanium bilayer counterelectrodes were fabricated by magnetron sputtering. The structural, electrical, and electrochemical properties of the bilayer counterelectrode were studied by varying the thickness of both platinum and titanium layers. The influence of both electrochemical active surface and crystallite size on charge transfer resistance of the bilayer counterelectrode was explored. From these evaluations, it was found that the as-prepared titanium layer was almost amorphous, and intermetallic phase was formed between platinum and titanium layers. As expected, sheet resistance of the electrode decreased with the increase in deposition time of both platinum and titanium layers. Metal titanium was found to be inert in the catalyzing reduction in tri-iodide. With the increment of deposition time of platinum layers, charge transfer resistance of the electrode decreased quickly first, and then reached a plateau after which it changed slightly. This outcome differs from that reported before. Careful examination showed that such a behavior was related closely to the electrochemical active surface area of electrode and platinum crystallite size. For a given electrolyte, charge transfer resistance decreased with the increase in electrochemical active surface and increased with the increment of the latter. Thus, a competition was observed between the two factors, which supports the suggestion of former researchers.