Engineering Papers⌕ Search

Engineering topics

Jin, M.

Publications and source records attributed to Jin, M..

At least 37 records · Page 2

Three-dimensional neutronics optimization of helium-cooled blanket for multi-functional experimental fusion-fission hybrid reactor (FDS-MFX)

Three-dimensional neutronics optimization calculations were performed to analyse the parameters of Tritium Breeding Ratio (TBR) and maximum average Power Density (PDmax) in a helium-cooled multi-functional experimental fusion-fission hybrid reactor named FDS (Fusion-Driven hybrid System)-MFX (Multi-Functional experimental) blanket. Three-stage tests will be carried out successively, in which the tritium breeding blanket, uranium-fueled blanket and spent-fuel-fueled blanket will be utilized respectively. In this contribution, the most significant and main goal of the FDS-MFX blanket is to achieve the PDmax of about 100 MW/m3 with self-sustaining tritium (TBR {>=} 1.05) based on the second-stage test with uranium-fueled blanket to check and validate the demonstrator reactor blanket relevant technologies based on the viable fusion and fission technologies. Four different enriched uranium materials were taken into account to evaluate PDmax in subcritical blanket: (i) natural uranium, (ii) 3.2% enriched uranium, (iii) 19.75% enriched uranium, and (iv) 64.4% enriched uranium carbide. These calculations and analyses were performed using a home-developed code VisualBUS and Hybrid Evaluated Nuclear Data Library (HENDL). The results showed that the performance of the blanket loaded with 64.4% enriched uranium was the most attractive and it could be promising to effectively obtain tritium self-sufficiency (TBR-1.05) and a high maximum average power density ({approx}100 MW/m{sup 3}) when the blanket was loaded with the mass of {sup 235}U about 1 ton. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

ASF RADARSAT Processor System Performance Summary

The Alaska SAR Facility (ASF) located at the University of Alaska Fairbanks (UAF) has been in operations since 1991 serving as a key data acquisition, processing, archive and distribution center for a number of polar orbiting SAR (synthetic aperture radar) satelittes including ERS 1/2 and JERS-1.

synthetic aperture radar RADARSAT Mapping↗

Chirp Scaling Algorithms for SAR Processing

The chirp scaling SAR processing algorithm is both accurate and efficient. Successful implementation requires proper selection of the interval of output samples, which is a function of the chirp interval, signal sampling rate, and signal bandwidth. Analysis indicates that for both airborne and spaceborne SAR applications in the slant range domain a linear chirp scaling is sufficient. To perform nonlinear interpolation process such as to output ground range SAR images, one can use a nonlinear chirp scaling interpolator presented in this paper.

nonlinear chirp scaling.↗

Analysis and Simulation for a Spotlight-Mode Aircraft SAR in Circular Flight Path

A spotlight aircraft SAR in a circular flight path can efficiently obtain an image with very high azimuth resolution or a wider azimuth viewing angle. An analysis on the spotlight SAR is made regarding the required PRF, the predicted resolution, and the computation complexity as a function of the aircraft altitude and the distance between a target and the center of the flight path projection. An efficient processing algorithm based on the exact wide beam spectrum is presented. The results of simulation indicate that the impulse responses meet the predicted resolution performance.

processing algorithm↗

SAR data processing adaptation for Magellan Cycle II

The authors describe the effort made at the Magellan SAR Data Processing Facility in adapting existing data processors to handle data collected from various imaging experiments. The different data processing requirements imposed by the various types of data are discussed, the tradeoffs and compromises made to work within the constraint of the existing systems are explained, and summary processing results obtained to date are given.

Leung, K.↗

SAR data processing for the Magellan prime mission

The Magellan prime mission involves mapping the planet of Venus once around its rotational axis. The Magellan synthetic aperture radar (SAR) data processing facility processes all SAR data collected by the Magellan spacecraft into image data on an orbit-by-orbit basis. About 1700 million bits of radar data were collected. A complete description of the Magellan SAR Data Processing Facility is provided with emphasis on key design features of the data processors that satisfied the project data processing requirements. A summary of the attained data processing performance is included, as well as a brief discussion of some of the constraints and considerations regarding the applicability of the processors to meeting the data processing goals anticipated for the follow-on mission phases (i.e., cycles II, III, and beyond).

Leung, K.↗

Refinement of Magellan radiometric correction using range centroid estimation

The Magellan (MGN) synthetic aperture radar (SAR) processing radiometric compensation algorithm is described, and the effective pointing error caused by the terrain is examined. It is shown how the range centroid can be computed from spacecraft ancillary data with an accurate topographic model. In cases where such data are not available, a technique is presented to estimate the range centroid from the coherent radar echoes. This technique is demonstrated using MGN SAR data.

Cheng, T.↗

Implementation and performance of the Magellan digital correlator subsystem

The Magellan synthetic aperture radar (SAR) produces Venus surface images from data collected by the SAR carried on board the Magellan spacecraft. The core of the primary Magellan SAR processor is the digital correlator subsystem (DCS). The pipeline DSC architecture enables the Magellan primary SAR processor (PSP) to achieve real-time data processing capability. The implementation and performance of the DSC are described. Hardware (H/W) constraints that influenced the processing algorithm design are highlighted.

Chen, M.↗

Squint mode SAR processing algorithms

The unique characteristics of a spaceborne SAR (synthetic aperture radar) operating in a squint mode include large range walk and large variation in the Doppler centroid as a function of range. A pointing control technique to reduce the Doppler drift and a new processing algorithm to accommodate large range walk are presented. Simulations of the new algorithm for squint angles up to 20 deg and look angles up to 44 deg for the Earth Observing System (Eos) L-band SAR configuration demonstrate that it is capable of maintaining the resolution broadening within 20 percent and the ISLR within a fraction of a decibel of the theoretical value.

Chang, C. Y.↗

Magellan SAR processing algorithm and H/W design

The SAR (synthetic-aperture radar) data-processing algorithm to be used for the Magellan mission is described. Radar system design, SAR data characteristics, and hardware (H/W) constraints, which are critical to the processing algorithm design, are highlighted. Data flow and the H/W architecture are given to show the real-time data processing capability. Simulation results obtained from processing the synthetic point-target echos are presented to demonstrate the performance of the processing algorithm.

Chen, M.↗

Sensitivity of synthetic aperture radar boresight orientation to orbit parameters

Attendant upon the use of synthetic aperture radar (SAR) in upcoming planetary missions, is the need to assess errors in the pointing angles of the instrument boresight due to spacecraft ephemeris errors. Developed herein are the constrained analytic partials of these boresight angles not only with respect to a motion-related, cartesian frame but also with respect to classical orbital elements. While both systems have great utility for spacecraft based instruments, the former system should prove useful for SAR instruments on aircraft.

Russell, R. K.↗

Performance evaluation of the JPL interim digital SAR processor

The performance of the Interim Digital SAR Processor (IDP) was evaluated. The IDP processor was originally developed for experimental processing of digital SEASAT SAR data. One phase of the system upgrade which features parallel processing in three peripheral array processors, automated estimation for Doppler parameters, and unsupervised image pixel location determination and registration was executed. The method to compensate for the target range curvature effect was improved. A four point interpolation scheme is implemented to replace the nearest neighbor scheme used in the original IDP. The processor still maintains its fast throughput speed. The current performance and capability of the processing modes now available on the IDP system are updated.

Wu, C.↗