Engineering topics

Jin, Congrui

Publications and source records attributed to Jin, Congrui.

14 records

DOE OSTI2026

Engineering Microstructure in Dry-Processed Cathodes Via Calendering

Calendering serves as a multifunctional step in dry electrode processing that not only densifies the electrode but also induces polytetrafluoroethylene (PTFE) fibrillation and reorganizes the microstructure. These coupled effects are essential for achieving electrical connectivity and sufficient cohesion, yet they also introduce trade-offs, such as active material particle fracture, pore collapse, and excessive porosity loss, that can hinder ionic transport. This research systematically maps the calendering parameter space for LiNi0.6Mn0.2Co0.2O2 (NMC622) dry cathodes with a target thickness of ∼100 µm and porosity of ∼30% by varying roll gaps, roll temperature, roll speed, and the number of passes. A practical processing window for this formulation and electrode architecture is identified that achieves sufficient PTFE fibrillation and strong interfacial contact while minimizing particle fracture and preserving the porosity required for efficient ionic transport. In particular, gradual-gap calendering with moderate per-pass compression mitigates fracture and pore collapse while still reaching the target thickness with reasonable throughput, and slower roll speeds with modest roll temperatures further reduce mechanical damage. These results provide actionable guidance for scaling NMC622-based thick dry-processed cathodes.

Park, Hyunji↗

DOE OSTI2026

Dry-processed electrodes enabled by polytetrafluoroethylene fibrillation for high-performance lithium-ion batteries

The dry processing technique of polytetrafluoroethylene (PTFE) fibrillation offers significant advancements in cost reduction, environmental impact, and electrochemical performance. Dry processing alone allows for ∼ 20–60% cost reduction and increases of up to 40 mg cm⁻2 of areal loading – it typically comes at a reduction of rate capability. By leveraging the network structure of fibers, this method enhances rate capability and cycling performance, providing a compelling alternative to the conventional and currently predominant wet processing. The review delves into PTFE fibrillation mechanisms and examines critical influencing factors including material properties and processing parameters. It also discusses challenges associated with the electrodes fabricated by PTFE fibrillation, including structural instability due to insufficient PTFE fibrillization, compromised electrical conductivity from an insufficient conductive network, inhomogeneous dispersion resulting from the absence of solvents, restricted ionic transport due to increased electrode thickness, inadequate adhesion to current collector because of low surface energy of PTFE, electrochemical degradation due to low lowest unoccupied molecular orbital (LUMO) level of PTFE, particle damage during processing and environmental concerns related PTFE being a perfluoroalkyl and polyfluoroalkyl substances (PFAS). Recent research innovations aimed at mitigating these issues, their application in beyond-lithium batteries, and future research directions are thoroughly discussed.

Park, Hyunji↗

DOE OSTI2026

Toward durable stacks: glass-ceramic sealants for intermediate-temperature protonic ceramic electrochemical systems

Protonic ceramic electrochemical cells (PCECs) are emerging as promising technologies for efficient energy conversion and hydrogen production because they operate at intermediate temperatures with improved efficiency and durability compared with conventional solid oxide electrochemical cells. However, the long-term reliability and commercialization of PCEC stacks remain strongly limited by the performance of sealants, which are required to maintain gas tightness, electrical insulation, and mechanical integrity under harsh thermal and chemical environments. Among various sealing approaches, glass-ceramic sealants are considered the most practical and scalable due to their excellent wettability, chemical tunability, and strong interfacial adhesion. This review provides a comprehensive overview of recent advances in glass-ceramic sealants for intermediate-temperature protonic ceramic electrochemical systems. The fundamental design principles of sealant compositions are first discussed, followed by recent developments in deposition methods, sintering strategies, surface treatments, and degradation monitoring techniques. Particular attention is given to the unique challenges associated with PCEC operating conditions, including hydrothermal degradation, interfacial reactions with barium-containing electrolytes, and thermal mismatch. Finally, future opportunities involving sustainable materials, multiscale modeling, additive manufacturing, and artificial intelligence-assisted sealant optimization are highlighted.

glass–ceramic sealants↗

DOE OSTI2023

Antimony nanobelt asymmetric membranes for sodium ion battery

In this study, composite asymmetric membranes containing antimony (Sb) nanobelts are prepared via a straightforward phase inversion method in combination with post-pyrolysis treatment. Sb nanobelt asymmetric membranes demonstrate improved cyclability and specific capacity as the alloy anode of sodium ion battery compared to Sb nanobelt thin films without asymmetric porous structure. The unique structure can effectively accommodate the large volume expansion of Sb-based alloy anodes, prohibit the loss of fractured active materials, and aid in the formation of stable artificial solid electrolyte interphases as evidenced by an outstanding capacity retention of ~98% in 130 cycles at 60 mA g -1 . A specific capacity of ~600 mAh g -1 is obtained at 15 mA g -1 (1/40C). When the current density is increased to 240 mA g -1 , ~80% capacity can be maintained (~480 mAh g -1 ). The relations among phase inversion conditions, structures, compositions, and resultant electrochemical properties are revealed through comprehensive characterization.

25 ENERGY STORAGE↗

DOE OSTI2022

Stress evolution and thickness change of a lithium-ion pouch cell under various cycling conditions

We report to design large-sized lithium-ion battery modules for the application of electric vehicles and grid-level energy storage, it is of important significance to understand how stress and dimension of a single pouch cell fluctuate during charge/discharge cycles. In this study, stress evolution under the constant-thickness condition and thickness change under the constant-stress condition are measured for in-house fabricated pouch cells, respectively. The results of stress measurements show that the stress increase percentage generally decreases when the charge/discharge current increases, regardless of the value of the initial compressive stress. With the same current density, the stress increase percentage generally increases when the upper cutoff voltage increases. With the same current density and upper cutoff voltage, the stress increase percentage decreases when the initial compressive stress increases. The results of thickness measurements show that the volume expansion percentage generally increases when the current density increases, regardless of the value of the constant compressive stress. With the same current density, the volume expansion percentage generally increases when the upper cutoff voltage increases. With the same current density and upper cutoff voltage, the volume expansion decreases when the constant compressive stress increases. The results provide important insights into the design principles of battery packs.

25 ENERGY STORAGE↗

DOE OSTI2022

Revitalizing interface in protonic ceramic cells by acid etch

Protonic ceramic electrochemical cells hold the promise to be operated at intermediate temperatures below 600 °C. Although the high proton conductivity of the bulk electrolyte has been demonstrated, it cannot be fully utilized in electrochemical full cells due to unknown causes. A practical solution is thus urgently needed. Here we showed that it comes from poor contacts between the low-temperature processed oxygen electrode-electrolyte interface. We demonstrated that a simple acid treatment can effectively rejuvenate the high-temperature annealed electrolyte surface, resulting in reactive bonding between the oxygen electrode and the electrolyte and improved electrochemical performance and stability. This enables exceptional protonic ceramic fuel-cell performance down to 350 °C, with peak power densities of 1.6 W cm -2 at 600 °C, 650 mW cm -2 at 450 °C, and 300 mW cm -2 at 350 °C, as well as stable electrolysis operations at large current densities above 3.9 A cm -2 under 1.4 V applied voltage at 600 °C. Furthermore, our work highlights the critical role of interfacial engineering in ceramic electrochemical devices and offers new understanding and practices towards sustainable energy infrastructure.

08 HYDROGEN↗

DOE OSTI2021

Exploring the structural uniformity and integrity of protonic ceramic thin film electrolyte using wet powder spraying

Thin protonic ceramic electrolyte contributes to lower ohmic resistance and enhances electrochemical performance of protonic ceramic electrochemical cells. However, manufacturing of large-scale thin electrolyte remains a challenge. Wet powder spraying is an attractive technique to deposit <10 µm thin electrolyte when advanced atomizing techniques and optimized spraying process are integrated. Here ultrasonic atomization is integrated in the wet powder spray technique to reduce the thickness of electrolyte. Moreover, a parametric study is conducted to optimize the wet powder spray process to deposit uniform and crack-free electrolyte film. It is illustrated that tuning of solid loading rates and spray passes can affect the morphology of the as-sprayed electrolyte film, enabling the structural compactness of the sintered electrolyte layer. To maintain chemical stability of the electrolyte layer during sintering, effect of sintering temperature is further investigated to produce a physically thin, structurally dense, and chemically homogeneous electrolyte layer. The protonic ceramic electrochemical cells fabricated with optimized spraying and sintering parameters demonstrate excellent performance under both fuel cell and electrolysis modes. In addition, the cells exhibit remarkable structural integrity during redox and long-term stability tests.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Innovative and Economically Beneficial Use of Corn and Corn Products in Electrochemical Energy Storage Applications

The United States is by far the largest corn producer worldwide, with corn yields steadily increasing for the past decades. In many midwestern U.S. states such as Iowa, Illinois, and Nebraska, corn farmers currently grow more corn than consumers can utilize as human food or animal feed. To sustain the economic viability of corn farmers, it is critical that new uses and markets for corn, corn byproducts from harvesting, corn industrial products, and corn byproducts from industrial processing should be discovered, giving the highest return to corn producers. With the increasing popularity of electric vehicles and grid-level energy storage systems for renewable energy, there has been an ever-growing interest in improving existing energy storage technologies as well as developing new ones. During this development, a great amount of effort has been focused on exploiting cost-effective solutions utilizing sustainable materials derived from renewable biomass. Here, innovative and economically beneficial uses of corn and corn products in various energy storage applications, such as lithium-ion batteries, solid-state batteries, and redox flow batteries, are looked at comprehensively, which may shed light on how to establish an environmentally sustainable, technically feasible, and economically beneficial solution to support the corn industry.

25 ENERGY STORAGE↗

DOE OSTI2020

On electrolyte wetting through lithium-ion battery separators

The wettability by electrolyte is a critical characteristic of lithium-ion battery separators since electrolyte absorption is essential for ionic transport. Most importantly, fast absorption of electrolyte facilitates the electrolyte filling and wetting processes during the battery assembly. However, theoretical or experimental investigation of separator wettability has rarely been reported, and thus very little quantitative data can be found in the existing literature. Here, innovative experimental techniques and associated analytical models have been developed to fully characterize the electrolyte wetting behavior through battery separators. Both in-plane and through-plane imbibition processes are investigated. The results show that, electrolyte needs significantly longer time to wet separators than it does for commercial electrodes. The wetting rate depends significantly on the pore size, porosity, and micro-structure of the separators. Electrolyte in-plane wetting is only observed in the separators manufactured by the wet process. Increasing separator porosity and pore size is shown to be substantially increasing through-plane wetting rate. In addition, ceramic coating is shown to increase in-plane wetting but retard through-plane wetting.

25 ENERGY STORAGE↗

DOE OSTI2020

Tin asymmetric membranes for high capacity sodium ion battery anodes

Sodium-ion batteries have attracted tremendous research attention as promising candidates for next generation energy storage systems due to low-cost and high abundancy. Furthermore, comparing to current Li-ion battery technology, limitations on the anode side seriously hinder the cell performance since sodium does not easily intercalate into graphite materials. Here, tin nanoparticles embedded in various asymmetric membrane structures were developed to leverage the high capacity of tin (847 mA h g -1 based on Na 15 Sn 4 ) and accommodate the significant volume expansion for long cycle life. It was demonstrated 762 mA h g -1 reversible capacity at 50 mA g -1 and stable cycling performance over 100 cycles with 92.1% capacity retention at 100 mA g -1 can be achieved for the tin asymmetric membrane electrode synthesized using polysulfone and tin tert-butoxide precursor.

25 ENERGY STORAGE↗

DOE OSTI2019

Effect of calendering and temperature on electrolyte wetting in lithium-ion battery electrodes

The formation process during which the liquid electrolyte wets into the porous electrode films usually takes several days or weeks at elevated temperatures, which poses a distinct bottleneck in the manufacturing line of lithium-ion batteries, especially for large-size batteries. However, despite the significance of achieving rapid and complete wetting, reliable scientific investigation on the wettability between the porous electrode and the liquid electrolyte has rarely been reported. In this study, a systematic study of the effect of different manufacturing factors on electrolyte wetting rate is conducted. The effect of calendering degree and wetting temperature on the electrodes obtained through both organic solvent-based processing and water-based processing are studied in detail. The results presented here suggest that although increasing calendering degree increases volumetric energy density, it generally reduces electrolyte wetting rate. While switching anode manufacturing from conventional processing to aqueous processing retards the electrolyte wetting process, switching cathode processing from organic system to aqueous system can drastically influence the pore structure of the cathodes, resulting in irregularly shaped wetted regions. The results also show that while the electrolyte wetting rate of all the tested electrolytes increases with increasing temperature, the change is significant only for the electrolytes with relatively high salt concentrations.

25 ENERGY STORAGE↗

DOE OSTI2019

Bio-inspired interfaces for easy-to-recycle lithium-ion batteries

The recycling of spent lithium-ion batteries has significant potential to benefit our society economically and environmentally as well as preserving raw materials. Although diverse process chains have been applied or under development to recycle batteries, a common, critical issue for battery recycling is the separation of the metallic current collector from the composite film of the electrode. In this study, inspired by the amazing controllable attachment and detachment ability of geckos’ foot-hairs, microscale near-surface architecture is designed on the interface between the current collector and the composite film in lithium-ion batteries, so that it displays controllable and directional adhesion, i.e., enhanced adhesion can be obtained during its lifetime to cope with the substantial volume changes of the composite film upon intercalation and deintercalation, whereas during recycling, the composite layer of the electrode can be easily peeled off from the current collector in a certain direction. We report this study is the first application of structural adhesives for the development of easy-to-recycle lithium-ion batteries. This technology can also be extended to other electronic products to avoid an ever-growing volume of electronic waste. The fundamental understanding on the interfacial adhesion and delamination mechanisms provides a scientific footing for the realization of next-generation easy-to-recycle electronics.

25 ENERGY STORAGE↗

DOE OSTI2019

Analysis of electrolyte imbibition through lithium-ion battery electrodes

A quantitative measurement of wettability between the porous electrode and the electrolyte in lithium-ion batteries can greatly improve our understanding of wetting behavior. Although the wetting balance method is widely used to measure the electrolyte transport rate in the porous electrodes, it suffers from several drawbacks and has limited accuracy. We here presented a combined experimental and theoretical investigation of the dynamics of electrolyte imbibition through electrodes. We suggested a novel method to accurately measure the electrolyte imbibition rate. Excellent agreement between the experimental data and the developed analytical model is obtained. The coefficient of penetrance (COP) and the solid permeability coefficient (SPC) are identified as important parameters, i.e., the electrolyte with higher COP value wets faster into an electrode, whereas for an electrolyte, the electrode with higher SPC value is more amenable to be impregnated. The effect of electrolyte salt concentration and electrolyte solvent has been studied in detail. The result implies that increasing salt concentration adversely influences electrolyte wetting rate, whereas switching from EC-DEC system to EC-EMC system improves electrolyte wetting rate. Moreover, for the electrolytes tested in this study, the imbibition into the uncalendered graphite anode is much faster than that into the uncalendered NMC532 cathode.

25 ENERGY STORAGE↗

DOE OSTI2018

Micron-size Silicon Monoxide Asymmetric Membranes for Highly Stable Lithium Ion Battery Anode

To meet the increasing demand for high energy density lithium ion batteries for electric vehicles and mobile electronics, it is mandatory to make revolutionary changes in electrode materials and chemistry. In this report, micron-size silicon monoxide powders are utilized to fabricate asymmetric membranes via a phase inversion method. We investigate the effects of carbonization temperature, silicon monoxide concentration and glues on membrane microstructure and electrochemical performance. It is also observed that silicon monoxide powders in the membranes consist of silicon with multiple oxidation states. All silicon monoxide asymmetric membrane electrodes are characteristic of significantly improved cycling stability as compared to the control silicon monoxide electrode. The best cycling performance is achieved from the asymmetric membrane with lower silicon monoxide content and using carboxymethyl cellulose as the glue. 95% initial capacity can be retained after 110 cycles at 400 mA g -1 for the membrane with ~33 wt.% silicon monoxide. Its initial capacity loss is only 23.1% with an average coulombic efficiency of 99.82% over 110 cycles.

25 ENERGY STORAGE↗