Engineering topics

Jimenez, Juan D.

Publications and source records attributed to Jimenez, Juan D..

5 records

DOE OSTI2024

Directing CO 2 electroreduction pathways for selective C 2 product formation using single-site doped copper catalysts

Manipulating the selectivity-determining step in post-C–C coupling is crucial for enhancing C 2 product specificity during electrocatalytic CO 2 reduction, complementing efforts to boost rate-determining step kinetics. Here we highlight the role of single-site noble metal dopants on Cu surfaces in influencing C–O bond dissociation in an oxygen-bound selectivity-determining intermediate, steering post-C–C coupling toward ethylene versus ethanol. Integrating theoretical and experimental analyses, we demonstrate that the oxygen binding strength of the Cu surface controls the favorability of C–O bond scission, thus tuning the selectivity ratio of ethylene-to-ethanol. The Rh-doped Cu catalyst with optimal oxygen binding energy achieves a Faradaic efficiency toward ethylene of 61.2% and an ethylene-to-ethanol Faradaic efficiency ratio of 4.51 at –0.66 V versus RHE (reversible hydrogen electrode). Integrating control of both rate-determining and selectivity-determining steps further raises ethylene Faradaic efficiency to 68.8% at 1.47 A cm -2 in a tandem electrode. Our insights guide the rational design of Cu-based catalysts for selective CO 2 electroreduction to a single C 2 product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Mechanistic Investigations of Gas-Phase Catalytic Hydrogenation in Metal–Organic Frameworks: Cooperative Activity of the Metal and Linker Sites in Cu x Rh 3– x (BTC) 2

We report the Cu x Rh 3–x (BTC) 2 catalyst (abbreviated CuRhBTC, BTC 3– = benzene tricarboxylate) provides excellent dispersion of active metal sites coupled with well-defined, robust structures for propylene hydrogenation reactions. This material therefore serves as a unique prototype for understanding catalytic activity in metal organic frameworks (MOFs). The mechanism of gas-phase hydrogenation at the bimetallic metal nodes of a MOF has been investigated in detail for the first time using in situ spectroscopy and diffraction experiments combined with density functional theory (DFT) calculations. The reaction occurs via a cooperative process in which the metal and linker sites play complementary roles; specifically, H 2 is dissociated at a Rh 2+ site with a missing Rh–O bond, while protonation of the decoordinated carboxylate linker stabilizes the active sites and promotes H 2 dissociation. In situ X-ray diffraction experiments show that the crystalline structure of the MOF is retained under reaction conditions at 20–100 °C. In situ Raman spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments demonstrate that propylene adsorbs at both Rh 2+ and Cu 2+ sites via π bonding. Cu 2+ is catalytically inactive, but at Rh 2+ sites, a propyl intermediate is observed when H 2 is introduced into the propylene feed. Furthermore, the appearance of the O–H stretch of COOH at ~3690 cm –1 in the DRIFT spectra is characteristic of defects consisting of missing Rh–O bonds. These experimental results are in general agreement with a reaction mechanism proposed by DFT, in which the decoordinated carboxylate linker is protonated, and the active Rh 2+ site remains available for readsorption of reactants in the subsequent catalytic cycle.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Planar defect-driven electrocatalysis of CO 2 -to-C 2 H 4 conversion

The selectivity towards a specific C 2+ product, such as ethylene (C 2 H 4 ), is sensitive to the surface structure of copper (Cu) catalysts in carbon dioxide (CO 2 ) electro-reduction. The fundamental understanding of such sensitivity can guide the development of advanced electrocatalysts, although it remains challenging at the atomic level. In this work, we demonstrated that planar defects, such as stacking faults, could drive the electrocatalysis of CO 2 -to-C 2 H 4 conversion with higher selectivity and productivity than Cu(100) facets in the intermediate potential region (–0.50 ~ –0.65 V vs. RHE). The unique right bipyramidal Cu nanocrystals containing a combination of (100) facets and a set of parallel planar defects delivered 67% faradaic efficiency (FE) for C 2 H 4 and a partial current density of 217 mA cm –2 at –0.63 V vs. RHE. In contrast, Cu nanocubes with exclusive (100) facets exhibited only 46% FE for C 2 H 4 and a partial current density of 87 mA cm –2 at an identical potential. Both ex situ CO temperature-programmed desorption and in situ Raman spectroscopy analysis implied that the stronger *CO adsorption on planar defect sites facilitates CO generation kinetics, which contributes to a higher surface coverage of *CO and in turn an enhanced reaction rate of C–C coupling towards C 2+ products, especially C 2 H 4 .

36 MATERIALS SCIENCE↗

DOE OSTI2020

Direct Identification of Mixed-Metal Centers in Metal–Organic Frameworks: Cu 3 (BTC) 2 Transmetalated with Rh 2+ Ions

Raman spectroscopy was used to establish direct evidence of heterometallic metal centers in a metal–organic framework (MOF). The Cu 3 (BTC) 2 MOF HKUST-1 (BTC 3– = benzenetricarboxylate) was transmetalated by heating it in a solution of RhCl 3 to substitute Rh 2+ ions for Cu 2+ ions in the dinuclear paddlewheel nodes of the framework. In addition to the Cu–Cu and Rh–Rh stretching modes, Raman spectra of (Cu x Rh 1– x ) 3 (BTC) 2 show the Cu–Rh stretching mode, indicating that mixed-metal Cu–Rh nodes are formed after transmetalation. Density functional theory studies confirmed the assignment of a Raman peak at 285 cm –1 to the Cu–Rh stretching vibration. Electron paramagnetic resonance spectroscopy experiments further supported the conclusion that Rh 2+ ions are substituted into the paddlewheel nodes of Cu 3 (BTC) 2 to form an isostructural heterometallic MOF, and electron microscopy studies showed that Rh and Cu are homogeneously distributed in (Cu x Rh 1– x ) 3 (BTC) 2 on the nanoscale.

02 PETROLEUM↗

DOE OSTI2020

Material Discovery and High Throughput Exploration of Ru Based Catalysts for Low Temperature Ammonia Decomposition

High throughput experimentation has the capability to generate massive, multidimensional datasets, allowing for the discovery of novel catalytic materials. Here, we show the synthesis and catalytic screening of over 100 unique Ru-Metal-K based bimetallic catalysts for low temperature ammonia decomposition, with a Ru loading between 1–3 wt% Ru and a fixed K loading of 12 wt% K, supported on γ-Al2O3. Bimetallic catalysts containing Sc, Sr, Hf, Y, Mg, Zr, Ta, or Ca in addition to Ru were found to have excellent ammonia decomposition activity when compared to state-of-the-art catalysts in literature. Furthermore, the Ru content could be reduced to 1 wt% Ru, a factor of four decrease, with the addition of Sr, Y, Zr, or Hf, where these secondary metals have not been previously explored for ammonia decomposition. The bimetallic interactions between Ru and the secondary metal, specifically RuSrK and RuFeK, were investigated in detail to elucidate the reaction kinetics and surface properties of both high and low performing catalysts. The RuSrK catalyst had a turnover frequency of 1.78 s−1, while RuFeK had a turnover frequency of only 0.28 s−1 under identical operating conditions. Based on their apparent activation energies and number of surface sites, the RuSrK had a factor of two lower activation energy than the RuFeK, while also possessing an equivalent number of surface sites, which suggests that the Sr promotes ammonia decomposition in the presence of Ru by modifying the active sites of Ru.

McCullough, Katherine (ORCID:0000000197525740)↗