Engineering topics

Jiang, Sisi

Publications and source records attributed to Jiang, Sisi.

5 records

DOE OSTI2023

Surface-functionalized silicon anode for high energy lithium ion batteries

A composition includes a silicon nanoparticle having surface-attached groups, and the silicon nanoparticle is represented by the formula: [Si]-[linker]-[terminal group]. In the formula [Si] represents the surface of the silicon nanoparticle; [terminal group] is a moiety that is configured for further reaction or is compatible with the electrolyte; and [linker] is a group linking the surface of the silicon nanoparticle to the [terminal group].

Zhang, Zhengcheng↗

DOE OSTI2021

An in situ generated polymer electrolyte via anionic ring-opening polymerization for lithium–sulfur batteries

The use of solid polymer electrolytes has previously proven to be an effective approach to address the lithium polysulfide dissolution and high electrode interfacial impedance of Li–S batteries via an in situ polymerization process. However, the conventional in situ synthesis employs a cationic ring-opening polymerization (CROP) of 1,3-dioxolane (DOL) catalyzed by a strong Lewis acid. New polymerization chemistry that is more compatible with Li–S chemistry needs to be developed to mitigate the disadvantages associated with the CROP process. Herein we report a new approach to in situ polymerize a set of new episulfide monomers in solution with LiTFSI salt via an anionic ring-opening polymerization (AROP). This new polymer system takes advantage of the inherent cell chemistry present in the Li–S cell through the nucleophilic lithium sulfides which are generated during the initial discharge cycle and act as the initiator for the polymerization. Additionally, their presence was shown to initiate the monomer solvents through AROP with no need for additional catalysts, rather than the more commonly utilized cationic systems which require an external Lewis acid catalyst. This work offers an important pathway toward in situ polymer electrolytes for Li–S batteries and offers a new avenue of exploration for polymer electrolyte synthesis.

25 ENERGY STORAGE↗

DOE OSTI2021

Engineering the Si Anode Interface via Particle Surface Modification: Embedded Organic Carbonates Lead to Enhanced Performance

Si nanoparticles (SiNPs) are recognized as a promising anode material for next-generation high-energy lithium-ion batteries. However, due to the more stringent requirements resulting from severe volume change, the solid-electrolyte interphase (SEI) on SiNPs plays a critical role in determining their cycling performance. Engineering the interface for higher stability has become an effective yet challenging approach to accommodate the deterioration of the silicon anode from the repeated lithiation/delithiation process. Herein, we report a novel approach of engineering a covalently bonded organic monolayer of ethylene carbonates onto the surface of the SiNPs that can help form a sturdy SEI. Finally, this molecule-level surface modification provides an effective approach to enable high-energy lithium-ion batteries with Si anodes.

25 ENERGY STORAGE↗

DOE OSTI2020

Restorable Neutralization of Poly(acrylic acid) Binders toward Balanced Processing Properties and Cycling Performance for Silicon Anodes in Lithium-Ion Batteries

Neutralization of poly(acrylic acid) (PAA)-based binders using lithium hydroxide is a common strategy for fabricating silicon anode laminates, which improves rheological properties of slurries toward high-quality electrode laminates. However, the significantly increased basicity causes degradation of Si particles while the irreversible conversion of carboxylic acid groups to lithium carboxylates undermines the binding strength, collectively leading to adverse cycling performance of the fabricated Si anodes. Herein, a novel neutralization process for PAA binders is developed. A weak base, ammonia (NH 3 ), was discovered as a neutralizing agent that still promotes rheological response of binder solutions but results in a reduced pH increase. Interestingly, the resulting ammonium carboxylate groups may cleave during the drying process to restore the neutralized PAA (PAA-NH 3 ) binders to their pristine states. The best-performing composition of 50% neutralization (PAA-50%NH 3 ) provides comparable rheological response as a PAA-Li binder as well as much improved cycling performance. Additionally, the half-cells using the PAA-50%NH 3 binder can deliver 60% capacity retention over 100 cycles at C/3 rate, affording a 23.8% increase compared to PAA-Li half-cells. This restorable neutralization process of PAA binders represents an innovative strategy of mitigating issues from slurry processing of Si particles to achieve concurrent improvements in high-quality lamination and cycling performance.

25 ENERGY STORAGE↗

DOE OSTI2020

Molecular Design of a Highly Stable Single-Ion Conducting Polymer Gel Electrolyte

Single-ion conducting (SIC) polymer electrolytes with a high Li transference number ( t Li + ) have shown the capability to enable enhanced battery performance and safety by avoiding liquid–electrolyte leakage and suppressing Li dendrite formation. However, issues of insufficient ionic conductivity, low electrochemical stability, and poor polymer/electrode interfacial contact have greatly hindered their commercial use. In this work, a Li-containing boron-centered fluorinated SIC polymer gel electrolyte (LiBFSIE) was rationally designed to achieve a high t Li + and high electrochemical stability. Owing to the low dissociation energy of the boron-centered anion and Li + , the as-prepared LiBFSIE exhibited an ionic conductivity of 2 × 10 –4 S/cm at 35 °C, which is exclusively contributed by Li ions owing to a high t Li + of 0.93. Both simulation and experimental approaches were applied to investigate the ion diffusion and concentration gradient in the LiBFSIE and non-cross-linked dual-ion systems. Typical rectangular Li stripping/plating voltage profiles demonstrated the uniform Li deposition assisted by LiBFSIE. The interfacial contact and electrolyte infiltration were further optimized with an in situ UV–vis-initiated polymerization method together with the electrode materials. By virtue of the high electrochemical stability of LiBFSIE, the cells achieved a promising average Coulombic efficiency of 99.95% over 200 cycles, which is higher than that of liquid–electrolyte-based cells. No obvious capacity fading was observed, indicating the long-term stability of LiBFSIE for lithium metal batteries.

36 MATERIALS SCIENCE↗