Engineering Papers⌕ Search

Engineering topics

Jia, Xiaoxia

Publications and source records attributed to Jia, Xiaoxia.

Pore-Space Partition and Optimization for Propane-Selective High-Performance Propane/Propylene Separation

The development of effective propane (C 3 H 8 )-selective adsorbents for the purification of propylene (C 3 H 6 ) from C 3 H 8 /C 3 H 6 mixture is a promising alternative to replace the energy-intensive cryogenic distillation. However, few materials possess the dual desirable features of propane selectivity and high uptake capacity. Here, we report a family of pore-space-partitioned crystalline porous materials (CPM) with remarkable C 3 H 8 uptake capacity (up to 10.9 mmol/g) and the highly desirable, yet uncommon C 3 H 8 selectivity (up to 1.54 at 0.1 bar and 1.44 at 1bar). The selectivity-capacity synergy endows them with record-performing C 3 H 8 /C 3 H 6 separation potential (i.e., C 3 H 6 recovered from the mixture). Moreover, these CPMs exhibit outstanding properties including high stability, low regeneration energy, and multi-modular chemical and geometrical tunability within the same isoreticular framework. Furthermore, the high C 3 H 8 /C 3 H 6 separation performance was further confirmed by the breakthrough experiments.

36 MATERIALS SCIENCE↗

Bacillus pumilus improved drought tolerance in Glycyrrhiza uralensis G5 seedlings through enhancing primary and secondary metabolisms

Abstract It has been reported that drought stress adversely affects the growth and yield of Glycyrrhiza uralensis, Chinese liquorice, in agricultural production. Bacillus pumilus , an important plant growth‐promoting bacterium, play a significant role in improving plant tolerance to abiotic stress. However, the role of Bacillus pumilus G5 in resisting drought stress is largely unknown. In the present study, we found that drought stress significantly inhibited the growth and reduced the biomass of G. uralensis seedlings by restraining C‐ and N‐metabolism, while this could be effectively reversed by B. pumilus G5 inoculation. Specifically, B. pumilus G5 significantly increased the content of primary metabolites such as soluble sugar, soluble protein, and free amino acids by regulating the C and N metabolic processes in G. uralensis seedlings. Moreover, B. pumilus G5 increased the content of glycyrrhizic acid, one of the important secondary metabolites, likely mediated through the increased content of primary metabolites and by recovering the expression of three key enzymes, HMGR, SQS, and β‐AS, in the biosynthesis of glycyrrhizic acid. Interestingly, the regulating effect of B. pumilus G5 inoculation on promoting the accumulation of glycyrrhizic acid and increasing the expression of synthesis‐related genes is spatially selective. In summary, our findings suggest that B. pumilus G5 could alleviate adverse effects induced by drought stress on the growth of G. uralensis seedlings by regulating C‐ and N‐metabolisms that further triggered the accumulation of secondary metabolites, and this finally improved the drought tolerance of cultivated G. uralensis seedlings.

Zhang, Xinhui↗

A Strategy for Constructing Pore‐Space‐Partitioned MOFs with High Uptake Capacity for C 2 Hydrocarbons and CO 2

Abstract Introduction of pore partition agents into hexagonal channels of MIL‐88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′‐dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore‐space partition. The Co 2 V‐pacs MOFs exhibit near or at record high uptake capacities for C 2 H 2 , C 2 H 4 , C 2 H 6 , and CO 2 among MOFs. The storage capacity of C 2 H 2 is 234 cm 3 g −1 (298 K) and 330 cm 3 g −1 (273 K) at 1 atm for CPM‐733‐dps (the Co 2 V‐BDC form, BDC=1,4‐benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low‐energy‐cost adsorbent regeneration. CPM‐733‐dps is stable and shows no loss of C 2 H 2 adsorption capacity following multiple adsorption–desorption cycles.

Wang, Yong↗

A Strategy for Constructing Pore-Space-Partitioned MOFs with High Uptake Capacity for C 2 Hydrocarbons and CO 2

Introduction of pore partition agents into hexagonal channels of MIL-88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4, 4'-dipyridylsulfide (dps) ligands. As a result, one third of open metal sites in the parent acs net are retained in pacs MOFs, while two thirds are used for pore space partition. The newly synthesized Co 2 V-pacs MOFs, with optimized pore space and open metal sites, exhibit near or at record high uptake capacities for C 2 H 2 , C 2 H 4 , C 2 H 6 , and CO 2 among MOFs. For example, the storage capacity of C 2 H 2 is 234 cm 3 /g -1 (298 K) and 330 cm 3 /g -1 (273K) at 1 atm for CPM-733-dps (the Co 2 V-BDC form, BDC=1,4-benzenedicarboxylate), higher than benchmark MOFs such as MOF-74 and all other pacs members. These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low-energy-cost adsorbent regeneration. CPM-733-dps is stable and shows no loss of C 2 H 2 adsorption capacity following multiple adsorption–desorption cycles.

25 ENERGY STORAGE↗

Pore-Space-Partition-Enabled Exceptional Ethane Uptake and Ethane-Selective Ethane–Ethylene Separation

A modell material for C 2 H 6 /C 2 H 4 separation would simultaneously have the highest C 2 H 6 uptake capacity and the highest C 2 H 6 /C 2 H 4 selectivity. But such material is elusive. A benchmark material for ethane-selective C 2 H 6 /C 2 H 4 separation is peroxo-functionalized MOF-74-Fe that exhibits the best known separation performance due to its high C 2 H 6 /C 2 H 4 selectivity (4.4), although its C 2 H 6 uptake capacity is moderate (74.3 cm 3 /g). Here, we report a family of pore-space-partitioned crystalline porous materials (CPMs) with exceptional C 2 H 6 uptake capacity and C 2 H 6 /C 2 H 4 separation potential (i.e., C 2 H 4 recovered from the mixture) despite their moderate C 2 H 6 /C 2 H 4 selectivity (up to 1.75). The ethane uptake capacity as high as 166.8 cm 3 /g at 1 atm and 298 K, more than twice that of peroxo-MOF-74-Fe, was previously achieved even though the isosteric heat of adsorption (21.9–30.4 kJ/mol) for these CPMs is as low as about one-third of that for peroxo-MOF-74-Fe (66.8 kJ/mol). While the overall C 2 H 6 /C 2 H 4 separation potentials have not yet surpassed peroxo-MOF-74-Fe, these robust CPMs exhibit outstanding properties including high thermal stability (up to 450 °C) and aqueous stability, low regeneration energy, and a high degree of chemical and geometrical tunability within the same isoreticular framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗