Ji, Xingchen | Engineering Papers

DOE OSTI2023

Coherent Combining for High‐Power Kerr Combs

Abstract Kerr frequency combs enable the miniaturization of comb sources for applications such as data communications and spectroscopy. However, due to the high field confinement and effective nonlinearity, Kerr combs typically operate with low output comb powers. While nonsolitonic Kerr combs operating in the normal group velocity dispersion (GVD) regime can access high pump‐to‐comb conversion efficiencies and relatively flat spectral profiles, many frequency comb applications require even higher comb‐line powers that are otherwise fundamentally unattainable without the use of optical amplifiers. A high efficient coherent beam combining of Kerr combs is demonstrated via on‐chip synchronization to greatly enhanced comb‐line powers. Two normal GVD Kerr combs are coherently combined for a 2.9 dB increase in comb power compared to a single comb while maintaining a high total pump‐to‐comb conversion efficiency of 26%. Lastly, it is shown that via spectral engineering of two normal GVD combs, it should be possible to significantly increase the spectral flatness of a combined comb. This platform enables fully integrated systems with powers that can readily exceed that of an individual comb system by more than an order of magnitude.

Kim, Bok Young↗

DOE OSTI2023

Ultra‐Low‐Loss Silicon Nitride Photonics Based on Deposited Films Compatible with Foundries

Abstract The fabrication processes of silicon nitride (Si 3 N 4 ) photonic devices used in foundries require low temperature deposition, which typically leads to high propagation losses. Here, it is shown that propagation loss as low as 0.42 dB cm −1 can be achieved using foundry compatible processes by solely reducing waveguide surface roughness. By postprocessing the fabricated devices using rapid thermal anneal (RTA) and furnace anneal, propagation losses down to 0.28 dB cm −1 and 0.06 dB cm −1 , respectively, are achieved. These low losses are comparable to the conventional devices using high temperature, high‐stress LPCVD films. The dispersion of the devices is also tuned, and it is proved that these devices can be used for linear and nonlinear applications. Low threshold parametric oscillation, broadband frequency combs, and narrow‐linewidth laser are demonstrated. This work demonstrates the feasibility of scalable photonic systems based on foundries.

Ji, Xingchen↗