Engineering Papers⌕ Search

Engineering topics

James, E.

Publications and source records attributed to James, E..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Structural and thermal interface characteristics of Stirling cycle cryocoolers for space applications

Integration of a Stirling cycle cryocooler into a flight system will require careful attention to the thermal, structural, and electrical interfaces between the cryocooler, the instrument and the spacecraft. These issues are currently under investigation by National Aeronautics and Space Administration/Goddard Space Flight Center personnel in laboratory tests of representative longlife cryocoolers. An 80 K cryocooler has been instrumented as a testbed for vibration control systems characterization. Initial vibration data using a new six-DOF force dynamometer is presented in this report.

Boyle, R.↗
NASA NTRS1985

Spacelab Hitchhiker, for rapid, low cost orbital resources

A carrier system called the Hitchhiker is being developed by NASA to bridge the gap between the limited capabilites of the Get Away Special (GAS) and the full support capabilities of the Spacelab. The Hitchhiker offers economy class flight for experiments which need little in the way of support services. The concept behind this carrier system is to use existing hardware in two basic configurations and to provide several sets of fixed service interfaces to the payload. One version of the Hitchhiker was designed to hang on the right side of the bay and the other to span the bay. Aside from cargo bay sill-level mounting positions for experiments, both Hitchhiker configurations provide modest power, command, and data management, and no active cooling services. The Hitchhiker is a payload of opportunity system utilizing the volume and weight remaining in the cargo bay after primary-payload needs are satisfied. Pointing and other time line requirements are limited to those established by the primary payload. The paper descibes the experiments of the first two Hitchhiker flights, together with future applications.

James, E.↗
NASA NTRS1984

Spacelab - The first mission and beyond

The recent successful flight of Spacelab 1, while being the culmination of over 10 years of international cooperation, is seen as just the start of a new era in manned scientific operations in orbit. This paper highlights the objectives and results of that first mission, as well as describing the international Spacelab program, its concept, and its history. Then looking to the future, the plans for utilizing Spacelab, its versatility and potential to the science community and its continuing evolution are discussed. Plans for substantially improving the cost effectiveness of Spacelab are examined including the use of dedicated discipline laboratories and small payload carriers. Finally, the paper evaluates the importance of incorporating Spacelab technology, concepts, lessons learned, and methodology into the development and utilization of an international Space Station over the next decade.

James, E.↗
NASA NTRS1982

Developing a scalable inert gas ion thruster

Analytical studies to identify and then design a high performance scalable ion thruster operating with either argon or xenon for use in large space systems are presented. The magnetoelectrostatic containment concept is selected for its efficient ion generation capabilities. The iterative nature of the bounding magnetic fields allows the designer to scale both the diameter and length, so that the thruster can be adapted to spacecraft growth over time. Three different thruster assemblies (conical, hexagonal and hemispherical) are evaluated for a 12 cm diameter thruster and performance mapping of the various thruster configurations shows that conical discharge chambers produce the most efficient discharge operation, achieving argon efficiencies of 50-80% mass utilization at 240-310 eV/ion and xenon efficiencies of 60-97% at 240-280 eV/ion. Preliminary testing of the large 30 cm thruster, using argon propellant, indicates a 35% improvement over the 12 cm thruster in mass utilization efficiency. Since initial performance is found to be better than projected, a larger 50 cm thruster is already in the development stage.

James, E.↗
NASA NTRS1979

An electric propulsion long term test facility

An existing test facility was modified to provide for extended testing of multiple electric propulsion thruster subsystems. A program to document thruster subsystem characteristics as a function of time is currently in progress. The facility is capable of simultaneously operating three 2.7-kW, 30-cm mercury ion thrusters and their power processing units. Each thruster is installed via a separate air lock so that it can be extended into the 7m x 10m main chamber without violating vacuum integrity. The thrusters exhaust into a 3m x 5m frozen mercury target. An array of cryopanels collect sputtered target material. Power processor units are tested in an adjacent 1.5m x 2m vacuum chamber or accompanying forced convection enclosure. The thruster subsystems and the test facility are designed for automatic unattended operation with thruster operation computer controlled. Test data are recorded by a central data collection system scanning 200 channels of data a second every two minutes. Results of the Systems Demonstration Test, a short shakedown test of 500 hours, and facility performance during the first year of testing are presented.

Trump, G.↗
NASA NTRS1978

A mission profile life test facility

A test facility is being prepared for a 16,000 hour mission profile life test of multiple electric propulsion thrust subsystems. The facility will be capable of simultaneously operating three 2.7 kW, 30 cm mercury ion thrusters and their power processing. The facility will permit conduction of a program of long-term tests to document thruster characteristics as a function of time and operating point to allow prediction of thruster performance for any mission profile. The thruster will be tested in a 7m by 10m vacuum chamber. Each thruster will be installed in a separate lock chamber so that it can be extended into, or extracted from the main chamber without violating the vacuum integrity of the other thruster. The thrusters will exhaust into a 3m by 5m frozen mercury target. The target and an array of cryopanels to collect sputtered target material will be liquid nitrogen chilled. Power processor units will be tested in an adjacent 1.5m by 2m vacuum chamber and will be temperature controlled by simulated heat pipes.

James, E.↗
NASA NTRS1973

A north-south stationkeeping ion thruster system for ATS-F

A one millipound cesium ion thruster system experiment designed for the ATS-F satellite will be used to demonstrate north-south stationkeeping for synchronous satellites. Development effort leading to the present design will be described and test data for qualification and flight acceptance tests will be presented. These include a review of EMI evaluations tests made with the power conditioning subsystem and the thruster simulator, and an extended system operational test. During the extended test, 90 on-off cycles simulated thruster operation in orbit. A planned 18,000 hour ground test of a flight qualified thruster will be discussed.

James, E.↗
NASA NTRS1972

A north-south stationkeeping ion thruster system for ATS-F.

An ion thruster system is being developed for the ATS-F satellite to demonstrate the application of ion thruster technology to the synchronous satellite north-south stationkeeping mission. The cesium bombardment ion thruster develops one millipound thrust at 2600 seconds specific impulse and provides thrust vectoring by accelerator electrode displacement. The propellant system is sized for two years operation at 25 percent duty cycle. Power conditioning circuitry is based on transistor inverters switching at 10 kHz. Thirteen command channels allow flexibility in operation; 12 telemetry channels provide information on system performance. Input power is less than 150 watts.

Worlock, R.↗