Engineering Papers⌕ Search

Engineering topics

Jain, A.

Publications and source records attributed to Jain, A..

At least 73 records · Page 4

Linearization of manipulator dynamics using spatial operators

Linearized dynamics models for manipulators are useful in robot analysis, motion planning, and control applications. Techniques from the spatial operator algebra are used to obtain closed form operator expressions for two types of linearized dynamics models, the linearized inverse and forward dynamics models. Spatially recursive algorithms of O(n) and O(n-squared) complexity for the computation of the perturbation vector and coefficient matrices for the linearized inverse dynamics model are developed first. Subsequently, operator factorization and inversion identities are used to develop corresponding closed-form expressions for the linearized forward dynamics model (LFDM). Once again, these are used to develop algorithms of O(n) and O(n-squared) complexity for the computation of the perturbation vector and the coefficient matrices. The algorithms for the LFDM do not require the explicit computation of the mass matrix nor its numerical inversion and are also of lower complexity than the conventional O(n-cubed) algorithms.

Jain, A.↗

Recursive flexible multibody system dynamics using spatial operators

This paper uses spatial operators to develop new spatially recursive dynamics algorithms for flexible multibody systems. The operator description of the dynamics is identical to that for rigid multibody systems. Assumed-mode models are used for the deformation of each individual body. The algorithms are based on two spatial operator factorizations of the system mass matrix. The first (Newton-Euler) factorization of the mass matrix leads to recursive algorithms for the inverse dynamics, mass matrix evaluation, and composite-body forward dynamics for the systems. The second (innovations) factorization of the mass matrix, leads to an operator expression for the mass matrix inverse and to a recursive articulated-body forward dynamics algorithm. The primary focus is on serial chains, but extensions to general topologies are also described. A comparison of computational costs shows that the articulated-body, forward dynamics algorithm is much more efficient than the composite-body algorithm for most flexible multibody systems.

Jain, A.↗

BV RI CCD photometry of 361,281 objects in the field of M 31

Deep BV RI CCD photometry was performed on a 1 sq deg region of M 31. A catalog of photometry and astrometry of a total of 361,281 stars is presented, with typical completion limits of BV RI = (22.3, 22.2, 22.2, 20.9). Photometric accuracy is about 2 percent at V = 19. This catalog allows detailed studies of stellar populations and reddening. The data are currently being used to assist in finding the optical counterparts of Einstein and ROSAT X-ray sources.

Magnier, E. A.↗

Recursive formulation of operational space control

A recently developed spatial operator algebra approach to modeling and analysis of multibody robotic systems is used to develop O(n) recursive algorithms that compute the operational space mass matrix and the operational space coriolis/centrifugal and gravity terms of an n-link serial manipulator. These algorithms enable an O(n) recursive implementation of operational space control.

Kreutz-Delgado, K.↗

Spatial Operator Algebra for multibody system dynamics

The Spatial Operator Algebra framework for the dynamics of general multibody systems is described. The use of a spatial operator-based methodology permits the formulation of the dynamical equations of motion of multibody systems in a concise and systematic way. The dynamical equations of progressively more complex grid multibody systems are developed in an evolutionary manner beginning with a serial chain system, followed by a tree topology system and finally, systems with arbitrary closed loops. Operator factorizations and identities are used to develop novel recursive algorithms for the forward dynamics of systems with closed loops. Extensions required to deal with flexible elements are also discussed.

Rodriguez, G.↗

A spatial operator algebra for manipulator modeling and control

A recently developed spatial operator algebra for manipulator modeling, control, and trajectory design is discussed. The elements of this algebra are linear operators whose domain and range spaces consist of forces, moments, velocities, and accelerations. The effect of these operators is equivalent to a spatial recursion along the span of a manipulator. Inversion of operators can be efficiently obtained via techniques of recursive filtering and smoothing. The operator algebra provides a high-level framework for describing the dynamic and kinematic behavior of a manipulator and for control and trajectory design algorithms. The interpretation of expressions within the algebraic framework leads to enhanced conceptual and physical understanding of manipulator dynamics and kinematics.

Rodriguez, G.↗

Spatial operator approach to under-actuated manipulator kinematics and dynamics

A study is made of the kinematics and dynamics of under-actuated manipulators. The presence of passive hinges causes the kinematics and dynamics of these manipulators to be considerably more complex when compared with fully actuated manipulators. Techniques from the spatial operator algebra are used to develop expressions for the generalized Jacobian, the mass matrix, and an efficient inverse dynamics computational algorithm.

Jain, A.↗

Recursive dynamics for flexible multibody systems using spatial operators

Due to their structural flexibility, spacecraft and space manipulators are multibody systems with complex dynamics and possess a large number of degrees of freedom. Here the spatial operator algebra methodology is used to develop a new dynamics formulation and spatially recursive algorithms for such flexible multibody systems. A key feature of the formulation is that the operator description of the flexible system dynamics is identical in form to the corresponding operator description of the dynamics of rigid multibody systems. A significant advantage of this unifying approach is that it allows ideas and techniques for rigid multibody systems to be easily applied to flexible multibody systems. The algorithms use standard finite-element and assumed modes models for the individual body deformation. A Newton-Euler Operator Factorization of the mass matrix of the multibody system is first developed. It forms the basis for recursive algorithms such as for the inverse dynamics, the computation of the mass matrix, and the composite body forward dynamics for the system. Subsequently, an alternative Innovations Operator Factorization of the mass matrix, each of whose factors is invertible, is developed. It leads to an operator expression for the inverse of the mass matrix, and forms the basis for the recursive articulated body forward dynamics algorithm for the flexible multibody system. For simplicity, most of the development here focuses on serial chain multibody systems. However, extensions of the algorithms to general topology flexible multibody systems are described. While the computational cost of the algorithms depends on factors such as the topology and the amount of flexibility in the multibody system, in general, it appears that in contrast to the rigid multibody case, the articulated body forward dynamics algorithm is the more efficient algorithm for flexible multibody systems containing even a small number of flexible bodies. The variety of algorithms described here permits a user to choose the algorithm which is optimal for the multibody system at hand. The availability of a number of algorithms is even more important for real-time applications, where implementation on parallel processors or custom computing hardware is often necessary to maximize speed.

Jain, A.↗

Recursive dynamics for geared robot manipulators

The authors consider the dynamical modeling of robot manipulators whose joint actuators consist of motors driving the joints through gears. The dynamical models for such manipulators are significantly more complex than those for direct drive manipulators. The authors develop recursive O(n) inverse and forward dynamics algorithms as well as recursive O(n2) algorithms for the computation of the mass matrix for geared manipulators. It is shown that, despite the added complexity of the dynamical models for geared manipulators, the algorithms closely resemble the corresponding algorithms for direct drive manipulators, and that the additional algorithmic or computational complexity is relatively insignificant. As a consequence, with little additional cost, existing direct drive algorithms can be easily extended to handle the effects of gearing at the joints.

Jain, A.↗

A spatial operator algebra for manipulator modeling and control

A spatial operator algebra for modeling the control and trajectory design of manipulation is discussed, with emphasis on its analytical formulation and implementation in the Ada programming language. The elements of this algebra are linear operators whose domain and range spaces consist of forces, moments, velocities, and accelerations. The effect of these operators is equivalent to a spatial recursion along the span of the manipulator. Inversion is obtained using techniques of recursive filtering and smoothing. The operator alegbra provides a high-level framework for describing the dynamic and kinematic behavior of a manipulator and control and trajectory design algorithms. Implementable recursive algorithms can be immediately derived from the abstract operator expressions by inspection, thus greatly simplifying the transition from an abstract problem formulation and solution to the detailed mechanization of a specific algorithm.

Rodriguez, G.↗

Knowledge representation system for assembly using robots

Assembly robots combine the benefits of speed and accuracy with the capability of adaptation to changes in the work environment. However, an impediment to the use of robots is the complexity of the man-machine interface. This interface can be improved by providing a means of using a priori-knowledge and reasoning capabilities for controlling and monitoring the tasks performed by robots. Robots ought to be able to perform complex assembly tasks with the help of only supervisory guidance from human operators. For such supervisory quidance, it is important to express the commands in terms of the effects desired, rather than in terms of the motion the robot must undertake in order to achieve these effects. A suitable knowledge representation can facilitate the conversion of task level descriptions into explicit instructions to the robot. Such a system would use symbolic relationships describing the a priori information about the robot, its environment, and the tasks specified by the operator to generate the commands for the robot.

Jain, A.↗

Method and apparatus for Delta Kappa synthetic aperture radar measurement of ocean current

A synthetic aperture radar (SAR) employed for delta k measurement of ocean current from a spacecraft without the need for a narrow beam and long observation times. The SAR signal is compressed to provide image data for different sections of the chirp band width, equivalent to frequencies and a common area for the separate image fields is selected. The image for the selected area at each frequency is deconvolved to obtain the image signals for the different frequencies and the same area. A product of pairs of signals is formed, Fourier transformed and squared. The spectrum thus obtained from different areas for the same pair of frequencies are added to provide an improved signal to noise ratio. The shift of the peak from the center of the spectrum is measured and compared to the expected shift due to the phase velocity of the Bragg scattering wave. Any difference is a measure of current velocity v sub o (delta k).

Jain, A.↗

Report on Satellite Radar for Detecting Ocean Currents

Good resolution and high signal/noise ratio anticipated. Report describes orbiting sidelooking radar that measures ocean currents in direction toward or away from it. Radar relies on relationship between Doppler shifts and lengths and frequencies of ocean waves.

Jain, A.↗

L band SAR ocean wave observations during Marsen

The five-sided flight pattern made it possible to view the same ocean surface patch from five different directions. The results obtained from analyzing radar and in situ measurements indicate that the focus dependence for optimum imaging is that for a surface moving with a speed that is approximately equal to the wave phase velocity. The finding also suggest that azimuthally traveling waves can be visible as range traveling waves when the necessary focus adjustments are made in the SAR processor and that the visibility of azimuthally travelling waves does not improve with decreasing integration time. What is more, the spectra and images of azimuthally traveling waves do not show observable distortions compared with those for range traveling waves.

Jain, A.↗

A comparative study on synthetic aperture radar and optical imagery of ocean waves

The ocean imaging capability of synthetic aperture radar (SAR) is examined in terms of an intercomparison between simultaneous, spatially collocated images of a coastal ocean scene, as recorded by aerial photography and aircraft-borne SAR. Based on a detailed study of these images, this paper examines various local features of oceanographic interest as they are imaged by the two methods. This provides information not available in the usual comparisons of normalized SAR and single point buoy spectra. In addition, aspects of the intensity wavenumber spectra of the two images are examined and discussed. An interesting and surprising conclusion arising from the comparison study is the ability of the SAR to image accurately non-uniform (possibly nonlinear) wave features which are imaged by the aerial photography. This result should have important implications on the development of SAR imaging models and the interpretation of the effect of ocean surface motion on the SAR images.

Banner, M. L.↗

Multibeam single frequency synthetic aperture radar processor for imaging separate range swaths

A single-frequency multibeam synthetic aperture radar for large swath imaging is disclosed. Each beam illuminates a separate ""footprint'' (i.e., range and azimuth interval). The distinct azimuth intervals for the separate beams produce a distinct Doppler frequency spectrum for each beam. After range correlation of raw data, an optical processor develops image data for the different beams by spatially separating the beams to place each beam of different Doppler frequency spectrum in a different location in the frequency plane as well as the imaging plane of the optical processor. Selection of a beam for imaging may be made in the frequency plane by adjusting the position of an aperture, or in the image plane by adjusting the position of a slit. The raw data may also be processed in digital form in an analogous manner.

Jain, A.↗

Ocean wave height measurement with SEASAT SAR using speckle diversity

Measurement of ocean wave heights with the synthetic aperture radar can be accomplished with high spatial resolution by determining the variation of speckle intensity with the frequency and angle of illumination. A comparison of data obtained by the SEASAT SAR with surface truth measurements obtained during the GOASEX and the JASIN experiments demonstrates this concept.

Jain, A.↗

SAR imaging of ocean waves - Theory

A SAR imaging integral for a rough surface is derived. Aspects of distributed target imaging and questions of ocean-wave imaging are considered. A description is presented of the results of analyses which are performed on aircraft and a spacecraft data in order to gain an understanding of the SAR imaging of ocean waves. The analyzed data illustrate the effect of radar resolution on the images of azimuthally traveling waves, the dependence of image distortion on the angle which the waves make with the radar flight path, and the dependence of the focusing parameter of the radar matched filter on the ocean wave period for azimuthally traveling waves. A dependence of ocean-wave modulation on significant wave height is also observed. The observed dependence of the modulations of azimuth waves on radar resolution is in contradiction to the hypothesis that these modulations are caused mainly by velocity bunching.

Jain, A.↗