Engineering Papers⌕ Search

Engineering topics

Jain, A.

Publications and source records attributed to Jain, A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

New Strong Gravitational Lenses from the DESI Legacy Imaging Surveys Data Release 9

We have conducted a search for strong gravitational lensing systems in the Dark Energy Spectroscopic Instrument (DESI) Legacy Imaging Surveys Data Release 9. This is the third paper in a series. These surveys together cover ~19,000 deg 2 visible from the Northern Hemisphere, reaching a z-band AB magnitude of ~22.5. We use a deep residual neural network, trained on a compilation of known lensing systems and high-grade candidates as well as nonlenses in the same footprint. After applying our trained neural network to the survey data, we visually inspect and rank images with probabilities above a threshold which has been chosen to balance precision and recall. We have found 1895 lens candidates, of which 1512 are identified for the first time. Combining the discoveries from this work with those from Papers I (335) and II (1210), we have discovered a total of 3057 new candidates in the Legacy Surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

SuperKEKB beam final focus superconducting magnet system

The SuperKEKB was designed and constructed as the upgraded accelerator of KEKB. In this accelerator design, the nano-beam scheme of collision was applied and a luminosity of 8 x10 35 cm -2 s -1 was targeted. In the design, the beam final focus system was the key component in the accelerator hardware elements. This final focus system consists of 55 superconducting magnets. In this paper, the designs of the magnets, the cryostats and the cryogenic system are shown, and the field measurement results are reported. The SuperKEKB beam operation with the final focus system started on 2018 March 19, and the magnet quench events up to 2020 December 16 are described.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

The dipole corrector magnets for the FFAG beam line of the CBETA accelerator

The Cornell Brookhaven Experimental Test Reactor (CBETA) is a novel, and the first of its kind accelerator to combine two remarkable concepts, the Energy Recovery Linac (ERL) and the Fixed Field Alternating Gradient (FFAG) concept. The accelerator has been built at Cornell University in collaboration with Brookhaven National Laboratory (BNL) and it is at its commissioning stage. The FFAG beam line consist of two arcs sections and a straight section, with all sections comprised of single cells, each cell made of two Halback type of magnets. The cell in the arc consists of one focusing quadrupole and a combined function magnet which is comprised of a dipole and a defocusing quadrupole multipole. The cells in the straight section consist of a focusing and a defocusing quadrupoles. Each focusing quadrupole has a window-frame dipole corrector magnet generating vertical dipole field and the other magnet has a corrector generating horizontal dipole field. This technical note reports on the mechanical design and the electromagnetic properties of these window frame corrector magnets.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Vertical Magnetic Measurement System Commis-sioning and First Measurements of the First Full-Length Prototype Quadrupole Magnet for the LHC Hi-Lumi Upgrade

This paper will report the commissioning of the vertical magnetic measurement system and the warm (room temperature) and cold (cryogenic) magnetic field measurements of the first full-length (4.2 m) quadrupole built by the US Accelerator Upgrade Project (AUP) project (formerly the LARP collaboration) for the high luminosity upgrade of the Large Hadron Collider at CERN. The magnet, designated MQXFAP2, is a prototype preceding production for the AUP Accelerator Upgrade Project (AUP). AUP will provide ten 8.4 m superconducting insertion region (IR) quadrupoles for the Hi-Lumi Upgrade. The 8.4 m quadrupoles will be built by assembling two 4.2 m magnets in a single cryostat. Agreement between BNL’s and LBNL’s warm measurement data has indicated that the upgraded vertical magnetic measurement system at BNL is ready for MQXFA magnet production testing. The cold magnetic measurement has been performed and preliminary data analysis has been conducted. The measured data indicates that the MQXFAP2 magnet has good magnetic field which meets the preliminary MQXFA magnet acceptance criteria.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

A concept for canceling the leakage field inside the stored beam chamber of a septum magnet

Here, the Advanced Photon Source is in the process of upgrading its storage ring from a double-bend to a multi-bend lattice as part of the APS Upgrade Project (APS-U). A swap-out injection scheme is planned for the APS-U to keep a constant beam current and to enable a small dynamic aperture. A novel concept that cancels out the effect of leakage field inside the stored beam chamber was introduced in the design of the septum magnet. As a result, the horizontal deflecting angle of the stored beam was reduced to below 1 µrad with a 2 mm septum thickness and 1.06 T normal injection field. The concept helped to minimize the integrated skew quadrupole field and normal sextupole fields inside stored beam chamber as well.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Magnetic Measurements of Storage Ring Magnets for the APS Upgrade Project

Extensive prototyping of storage ring magnets is ongoing at the Advanced Photon Source (APS) in support of the APS Multi-Bend Achromat (MBA) upgrade project (APS-U) [1]. As part of the R&D activities four quadrupole magnets with slightly different geometries and pole tip materials, and one sextupole magnet with vanadium permendur (VP) pole tips were designed, built and tested. Magnets were measured individually using a rotating coil and a Hall probe for detailed mapping of the magnetic field. Magnets were then assembled and aligned relative to each other on a steel support plate and concrete plinth using precision machined surfaces to gain experience with the alignment method chosen for the APS-U storage ring magnets. The required alignment of magnets on a common support structure is 30 μm rms. Measurements of magnetic field quality, strength and magnet alignment after subjecting the magnets and assemblies to different tests are presented.

Doose, C.↗
DOE OSTI2017

State of the Art and Future Research Needs for Multiscale Analysis of Li-Ion Cells

The performance, safety, and reliability of Li-ion batteries are determined by a complex set of multiphysics, multiscale phenomena that must be holistically studied and optimized. This paper provides a summary of the state of the art in a variety of research fields related to Li-ion battery materials, processes, and systems. The material presented here is based on a series of discussions at a recently concluded bilateral workshop in which researchers and students from India and the U.S. participated. It is expected that this summary will help understand the complex nature of Li-ion batteries and help highlight the critical directions for future research.

25 ENERGY STORAGE↗
DOE OSTI2016

First-principles simulations of 2-D semiconductor devices: Mobility, I-V characteristics, and contact resistance

We report in this paper ab-initio quantum transport simulations of different types of single-layer 2-D semiconductors: transition metal and group IV dichalcogenides in the 2H or 1T phase as well as black phosphorus. The electron and hole phonon-limited mobilities of eight selected 2-D crystals are first analyzed before using these materials as n- or p-type channels of ultra-scaled single-gate transistors, computing their I-V characteristics in the presence of electron-phonon scattering, and comparing them to each other. Finally, the properties of metal-MoS 2 contacts are investigated. It is revealed that the current tends to flow at the edge of the metal layer before entering the semiconductor, thus limiting the injection efficiency.

Luisier, M.↗
DOE OSTI2016

A liquid jet setup for x-ray scattering experiments on complex liquids at free-electron laser sources

In this paper we describe a setup for x-ray scattering experiments on complex fluids using a liquid jet. The setup supports Small and Wide Angle X-ray Scattering (SAXS/WAXS) geometries. The jet is formed by a gas-dynamic virtual nozzle (GDVN) allowing for diameters ranging between 1 μm and 20 μm at a jet length of several hundred μm. To control jet properties such as jet length, diameter, or flow rate, the instrument is equipped with several diagnostic tools. Three microscopes are installed to quantify jet dimensions and stability in situ. The setup has been used at several beamlines performing both SAXS and WAXS experiments. As a typical example we show an experiment on a colloidal dispersion in a liquid jet at the X-ray Correlation Spectroscopy instrument at the Linac Coherent Light Source free-electron laser.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Carbon and energy fluxes in cropland ecosystems: a model-data comparison

Croplands are extremely productive ecosystems that contribute to land–atmosphere exchange of carbon, energy, and water during their short growing seasons. We evaluated and compared net ecosystem exchange (NEE), latent heat flux (LE), and sensible heat flux (H) simulated by a suite of ecosystem models at five agricultural eddy covariance flux tower sites in the central United States as part of the North American Carbon Program Site Synthesis project. Most of the models overestimated H and underestimated LE during the growing season, leading to overall higher Bowen ratios compared to the observations. Most models systematically under predicted NEE, especially at rain-fed sites. Certain crop-specific models that were developed considering the high productivity and associated physiological changes in specific crops better predicted the NEE and LE at both rain-fed and irrigated sites. Models with specific parameterization for different crops better simulated the inter-annual variability of NEE for maize-soybean rotation compared to those models with a single generic crop type. Stratification according to basic model formulation and phenological methodology did not explain significant variation in model performance across these sites and crops. The under prediction of NEE and LE and over prediction of H by most of the models suggests that models developed and parameterized for natural ecosystems cannot accurately predict the more robust physiology of highly bred and intensively managed crop ecosystems. When coupled in Earth System Models, it is likely that the excessive physiological stress simulated in many land surface component models leads to overestimation of temperature and atmospheric boundary layer depth, and underestimation of humidity and CO 2 seasonal uptake over agricultural regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

The optics of the low energy FFAG cell of the eRHIC collider, using realistic field maps

The proposed electron accelerator of the eRHIC complex will use a 1.32 GeV Energy Recovery Linac (ERL) to accelerate the e-bunches to a top energy of 21.2 GeV before they collide with the hadron bunches. The e-bunches attain the 21.2 GeV energy after passing through the ERL 16 times as they recirculate in two rings which are placed alongside the RHIC hadron accelerator. The two rings are made of periodic cells and each cell is made of one focusing and one defocusing permanent magnet qudrupole. In this paper we present the electromagnetic calculations of the 2D and 3D models of a cell which is comprised of two modified Halbach quadrupoles, and the optical properties of the cell.

43 PARTICLE ACCELERATORS↗