Engineering PapersSearch

Engineering topics

Jacobson, I. D.

Publications and source records attributed to Jacobson, I. D..

52 records · Page 3

Passenger demographics and subjective response to commuter aircraft in the northeast

Results are compared for comfort and environmental studies taken in conjunction with a STOL program. Data were taken on flights of four different airlines, each flying different aircraft. Two of the lines are classified as commuter airlines flying between relatively close destinations. The aircraft involved are: the De Havilland Twin Otter, a Canadian aircraft; the French Nord 262; the Beechcraft 99 Airliner and the Sikorsky S-61 helicopter, both American.

Noskowitz, D.

Ride quality evaluation 1: Questionnaire studies of airline passenger comfort

As part of a larger effort to assess passenger comfort in aircraft, two questionnaires were administered: one to ground-based respondents; the other to passengers in flight. Respondents indicated the importance of various factors influencing their satisfaction with a trip, the perceived importance of various physical factors in determining their level of comfort, and the ease of time spent performing activities in flight. The in-flight sample also provided a rating of their level of comfort and of their willingness to fly again. Comfort ratings were examined in relation to (1) type of respondent, (2) type of aircraft, (3) characteristics of the passengers, (4) ease of performing activities, and (5) willingness to fly again.

Richards, L. G.

Effects of aircraft design on STOL ride quality: A simulator study

To improve the ride quality in short takeoff aircraft, several means have been investigated. In general, these methods consist of placing sensors in the aircraft which sense aircraft motion, usually linear accelerations and angular rates. These signals are then used to deflect control surfaces which generate aerodynamic forces and moments which tend to minimize the motion which the passenger feels. One of the disadvantages of some of these systems is that they may tend to degrade the handling qualities or controllability of the airplane, making it more difficult or annoying for the pilot to fly. Rather than using active control systems to control ride quality, one might possibly design aircraft so that they are inherently pleasant to ride. The purpose of this study is to determine the relationship between characteristic aircraft motions and aircraft ride quality.

Jacobson, I. D.

Flight simulator experiments to determine human reaction to aircraft motion environments

An analysis of human response to aircraft motion is presented using data obtained on the NASA Flight Research Center's Jetstar aircraft. The purpose of these tests was to explore the relationship of vertical and transverse accelerations to human comfort as well as obtain information on the maximum comfortable bank angle for commercial aircraft operations. A preliminary study was also conducted to establish the importance or lack thereof of the low frequency content of aircraft motion due to natural turbulence. An effort has been made to model these data and comparisons with appropriate sources are made.

Jacobson, I. D.

Environmental criteria for human comfort. A study of the related literature

The data presented has for the most part been extracted from existing in-house and memoranda reports. The variables considered are motion, noise, temperature and pressure. The report is broken down into chapters for each of the environmental variables and criteria proposed based on the existing literature.

Jacobson, I. D.

The comfort and satisfaction of air travelers - Basis for a descriptive model

The results of a questionnaire and interview survey are used as a basis for proposing a descriptive model of the comfort and satisfaction of the commercial air traveler. Passenger attitudes toward the present commercial air travel system are examined. Comfort is interpreted as being represented by a four-dimensional composite of commonly encountered environmental variables. Satisfaction is represented as a composite of safety, cost-benefit, luxury, and in-flight activity dimensions.

Jacobson, I. D.

The applicability of special subject groups for assessing passenger reaction to flight environments

The following conclusions were reached on passenger responses: (1) Within acceptable limits, the crew/flight attendants do not appear to be able to predict passenger responses. (2) There exists a relationship between passenger and subject overall responses. (3) Finally, a strong relationship exists between a suitably weighted running and overall subjective response. The recommended weighting function W(I) is approximately equal to I to the 0.75 power, indicating that the latter part of a flight is given more importance in a subject's overall comfort evaluation than the beginning of the flight.

Jacobson, I. D.

Effect of motion frequency spectrum on subjective comfort response

In order to model passenger reaction to present and future aircraft environments, it is necessary to obtain data in several ways. First, of course, is the gathering of environmental and passenger reaction data on commercial aircraft flights. In addition, detailed analyses of particular aspects of human reaction to the environment are best studied in a controllable experimental situation. Thus the use of simulators, both flight and ground based, is suggested. It is shown that there is a reasonably high probability that the low frequency end of the spectrum will not be necessary for simulation purposes. That is, the fidelity of any simulation which omits the very low frequency content will not yield results which differ significantly from the real environment. In addition, there does not appear to be significant differences between the responses obtained in the airborne simulator environment versus those obtained on commercial flights.

Jacobson, I. D.

Models of subjective response to in-flight motion data

Mathematical relationships between subjective comfort and environmental variables in an air transportation system are investigated. As a first step in model building, only the motion variables are incorporated and sensitivities are obtained using stepwise multiple regression analysis. The data for these models have been collected from commercial passenger flights. Two models are considered. In the first, subjective comfort is assumed to depend on rms values of the six-degrees-of-freedom accelerations. The second assumes a Rustenburg type human response function in obtaining frequency weighted rms accelerations, which are used in a linear model. The form of the human response function is examined and the results yield a human response weighting function for different degrees of freedom.

Rudrapatna, A. N.

Analysis of passenger acceptance of commercial flights having characteristics similar to STOL

Previous work in the development of quantitative models for the prediction of passenger reaction to motion and vehicle environment parameters in flight was extended to include a class of aircraft appropriate for low-density, short-haul service. The results indicate that it is possible to obtain quantitative response inputs from an usually small special test-subject group which will be representative of the general traveling public. Additional data which indicate the importance of comfort as a factor in evaluating ride quality was obtained, and identification of the factors which contribute to judgments regarding comfort level was improved. Seat comfort and seat spacing is very vital in the smaller aircraft. Mathematical modeling applied in conjuction with passenger reaction data was shown to be very useful for establishing ride-quality design criteria.

Kuhlthau, A. R.

Data acquisition and reduction for the University of Virginia superconducting magnetic suspension and balance facility

The problems associated with data acquisition and reduction in the U.Va. superconducting magnetic suspension and balance facility are similar to those in free-flight ranges (or tunnels). The model undergoes a Quasi-six-degree of freedom motion which must be monitored both in position and angular orientation problem is made more difficult because geometric constraints prevent direct visual access to the model in the Mach 3 wind tunnel. The methods, accuracies and problems associated with the acquisition of data are discussed.

Jacobson, I. D.

STOL ride quality criteria - Passenger acceptance.

The ability to mathematically model human reaction to variables involved in transportation systems offers a very desirable tool both for the prediction of passenger acceptance of proposed systems, and for establishing acceptance criteria for the system designer. As a first step in the development of a general model for STOL systems, a mathematical formulation is presented which accepts as inputs nine variables felt to be important in flight under STOL-type conditions and presents an index of human response as the output. The variables used are three linear motions, three angular motions, pressure, temperature and noise level. The results are used to establish specifications for stability augmentation systems to improve the ride quality of existing STOL aircraft.

Jacobson, I. D.

Boundary layer stability on a yawed spinning body of revolution and its effect on the magnus force and moment

The parameters are established which are important to the stability of a boundary layer flow over a yawed spinning cylinder in a uniform stream. It is shown that transition occurs asymmetrically in general and this asymmetry can be important for the prediction of aerodynamic forces and moments (e.g., the Magnus effect). Instability of the steady-state boundary layer flow is determined using small disturbance theory. Although the approach is strictly valid only for the calculation of the conditions for stability in the small, experimental data indicate that in many problems, it provides a good estimate for the transition to turbulence.

Jacobson, I. D.

Data acquisition and reduction for the U. Va. superconducting magnetic suspension and balance facility.

The problems associated with data acquisition and reduction in the University of Virginia superconducting magnetic suspension and balance facility are similar to those in free-flight ranges (or tunnels). The model undergoes a 'Quasi-six-degree-of-freedom' motion which must be monitored both in position and angular orientation from which the aerodynamics must be inferred. The data acquisition problem is made more difficult because geometric constraints prevent direct visual access to the model in the Mach 3 wind tunnel. The methods, accuracies and problems associated with the acquisition of data are discussed.-

Jacobson, I. D.

Data acquisition and reduction for the University of Virginia superconducting magnetic suspension and balance facility

The problems associated with data acquisition and reduction in the U. Va. superconducting magnetic suspension and balance facility are similar to those in free-flight ranges (or tunnels). The model undergoes a quasi-six-degree-of-freedom motion which must be monitored both in position and angular orientation from which the aerodynamics must be inferred. The data acquisition problem is made more difficult because geometric constraints prevent direct visual access to the model in the Mach 3 wind tunnel. The methods, accuracies, and problems associated with the acquisition of data are discussed.

Jacobson, I. D.