Engineering topics

Jacob M Brodnick

Publications and source records attributed to Jacob M Brodnick.

7 records

NASA NTRS2020

Nonlinear Slosh Damping Testing and Analysis for Launch Vehicle Propellant Tanks

Propellant tank slosh damping models for launch vehicle ascent analysis typically employ linear models for bare-wall damping, or assume a single, low-amplitude wave height for baffled configurations. A higher fidelity damping model would incorporate nonlinear effects to increase damping as slosh wave amplitude increases. This paper provides an overview of a technical assessment performed by the NASA Engineering and Safety Center (NESC) to evaluate lateral slosh damping as a function of lateral force (or wave) amplitude for multiple tank configurations. The increased fidelity of nonlinear slosh damping models, if leveraged, has the potential to reduce over-conservatism associated with the use of linear slosh damping models. This can provide design flexibility to enhance launch vehicle flight control performance, reduce baffle design requirements and/or increase robustness in targeted areas such as control-structure interaction during ascent.

Tannen S VanZwieten↗

NASA NTRSDate not supplied

Validation of a Computational Fluid Dynamics Model of Axial Jet Mixing for Cryogenic Propellant Tank Pressure Control

The Fluid Dynamics Branch at the NASA Marshall Space Flight Center is preparing to support flight programs through analysis of a variety of cryogenic fluid management (CFM) applications. Many vehicles being considered for future manned missions to the moon and beyond use chemical or nuclear thermal propulsion systems that rely on cryogenic propellants. Storing cryogenic propellants for later use is a challenge, though. Many areas of active CFM research, testing, and design involve propellant conditioning to ensure propellant remains a usable liquid for propulsion. Multiple technologies may be used to achieve adequate conditioning including the subject of this paper, a jet-based mixer. Mixing serves to homogenize fluid temperatures and decrease ullage pressure. Development and validation of a modeling methodology for jet-based mixing was conducted to prepare for in-line design work.

Jacob M Brodnick↗

NASA NTRSDate not supplied

Gas Phase Effects on Slosh Dynamics

Gas phase effects on slosh dynamics were quantified using computational fluid dynamics (CFD) simulation for a range of propellant and ullage gas combinations. Historical slosh modeling using potential flow solutions typically neglects gas phase effects. Regardless, the results have been shown to compare well with slosh ground tests typically performed with water and air at standard temperature and pressure. CFD analysis reveals that as the liquid-to-gas density ratio decreases, slosh dynamics change due to the relative increase in gas inertia and thus influence on liquid motion. The result is a profound impact on slosh dynamics over certain parameter spaces particularly for liquid hydrogen. Gas phase effects on slosh dynamics should be considered in slosh models especially for liquid hydrogen propellant tanks.

Jacob M Brodnick↗

NASA NTRSDate not supplied

Validation and Development of a Fast-Running CFD Model for the No-Vent Fill of Liquid Propellant Tank

Cryogenic fluids, while offering higher energy density than storable propellants, present several handling challenges, including gradual boil-off and tank self-pressurization. Transferring these propellants between tanks can be problematic, as the receiving tank's temperature and pressure often lead to flashing and rapid boil-off upon injection. The No-Vent Fill (NVF) technique mitigates these risks by preventing liquid fuel from being expelled overboard. By controlling tank pressure and ensuring appropriate condensation in the ullage region, the NVF process avoids exceeding vent pressure limits. In this study, Loci/STREAM-VOF simulations were compared with data from NASA K-site test runs on a 2.1 cubic meter tank with a bottom orifice under various no-vent fill conditions, including different wall temperatures, flow rates, and inlet liquid temperatures. The effort demonstrated that Loci/STREAM-VOF is capable of quantitatively capturing the important physics of NVF with submerged jets: (1) validation of the liquid-vapor interface turbulence velocity using previous experimental data showed good agreement at different fill levels; (2) validation of the CFD Stanton number for mass transfer provided an adequate mass transfer coefficient range; (3) consistent pressure agreements were found in the pressure history for both cold and warm conditions; and (4) the variations of final pressure with flow rate and inlet liquid temperature were well predicted by the CFD simulation. The application of NVF for low-gravity conditions will be studied in future work.

CFD↗

NASA NTRSDate not supplied

The Potential Effects of Radiation-Caused Tank Heating in Nuclear Thermal Propulsion Applications

Nuclear thermal propulsion (NTP) vehicles provide a strong option for crewed missions to Mars. Such designs which use cryogenic hydrogen as the stored propellant can provide ISP in excess of 850 seconds and thrusts capable of accelerations roughly comparable to typical in-space chemical engines thus enabling shorter travel times and wider mission abort windows. Given those capabilities, NTP engines provide a viable option for travel to Mars. Nonetheless, complications arise as the nuclear reactions in the reactor core not only heat the propellant but also emit radiation which affects components across the vehicle. In particular, the radiation which reaches the propellant tanks can heat the stored cryogenic propellant, altering the temperature of the propellant as it leaves the tank headed to the turbopump. Determining whether that tank heating causes significant heating of the outflowing propellant serves as an important question for any NTP vehicle design. Results show that warm propellant can cause buoyancy-driven fluid motion within the tank and ultimately can be drawn into the outflow from the tank, and thus must be accounted for in analysis and design of NTP vehicles.

Kalen E Braman↗

NASA NTRSDate not supplied

Gas Phase Effects on Slosh Dynamics

Gas phase effects on slosh dynamics were quantified using computational fluid dynamics (CFD) simulation for a range of propellant and gas combinations. Historical slosh modeling using potential flow solutions typically neglects gas phase effects. Regardless, the results have been shown to compare well with slosh ground tests typically performed with water and air at standard temperature and pressure. CFD analysis reveals that as the liquid-to-gas density ratio decreases, slosh dynamics change due to the relative increase in gas inertia and thus influence on liquid motion. The result is a profound impact on slosh dynamics over certain parameter spaces particularly for liquid hydrogen. Gas phase effects on slosh dynamics should be considered in slosh models especially for liquid hydrogen propellant tanks.

Jacob M Brodnick↗

NASA NTRSDate not supplied

Gas Phase Effects on Slosh Dynamics

Jacob M Brodnick↗