Engineering Papers⌕ Search

Engineering topics

Imbriale, W. A.

Publications and source records attributed to Imbriale, W. A..

36 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

A method using focal plane analysis to determine the performance of reflector antennas

Reflector antenna optimization schemes using array feeds have been used to recover antenna losses resulting from antenna distortions and aberrations and to generate contour coverage patterns. Historically, these optimizations have been carried out using the antenna far-field scattered patterns. The far-field patterns must be calculated separately for each of the array feed elements. For large or complex antennas (which include beam-waveguide antennas), the far-field calculation times can be prohibitive. This article presents a method with which the optimization can be carried out in the antenna focal region, where the scattering calculation needs only to be done once independently of the number of the elements in the array. This article also includes the results of a study, utilizing this unique technique, to determine the capabilities and limitations of using array feeds to compensate for gravitational induced losses in large reflector antennas.

Cramer, P. W.↗
NASA NTRS1994

Use of the sampling theorem to speed up near-field physical optics scattering calculations

Physical optics scattering calculations performed on the DSN 34-m beam-waveguide antennas at Ka-band (32 GHz) require approximately 12 hr of central processing unit time on a Cray Y-MP2 computer. This is excessive in terms of resource utilization and turnaround time. Typically, the calculations involve five surfaces, and the calculations are done two surfaces at a time. The sampling theorem is used to reduce the number of current values that must be calculated over the second surface by performing a physical optics integration over the first surface. The additional number of current values required on the second surface by subsequent physical optics integrations is obtained by interpolation over the original current values. Time improvements on the order of a factor of 2 to 4 were obtained for typical scattering pairs.

Cramer, P. W.↗
NASA NTRS1994

A Simple Physical Optics Algorithm Perfect for Parallel Computing Architecture

A reflector antenna computer program based upon a simple discreet approximation of the radiation integral has proven to be extremely easy to adapt to the parallel computing architecture of the modest number of large-gain computing elements such as are used in the Intel iPSC and Touchstone Delta parallel machines.

reflector antenna Intel iPSC Touchstone Delta↗
NASA NTRS1993

DSS-13 S-Band Design Optimization Using The Focal-Plane Method

In this paper, the Focal-Plane (Complex-Conjugate Phase-Matching) Method is used to select the appropriate gain and location of a feed for S-Band (2.295 GHz) operation of DSS-13, the new NSA/JPL Deep Space Network (DSN) 34-m Beam WaveGuide (BWG) antenna. It is found empirically that the Focal-Plane Method gives a better design in terms of the G/T figure than previous S-Band designs.

Focal Plane S-Band↗
NASA NTRS1993

A Simple Physical Optics Algorithm Perfect for Parallel Computing

One of the simplest reflector antenna computer programs is based upon a discrete approximation of the radiation integral. This calculation replaces the actual reflector surface with a triangular facet representation so that the reflector resembles a geodesic dome. The Physical Optics (PO) current is assumed to be constant in magnitude and phase over each facet so the radiation integral is reduced to a simple summation. This program has proven to be surprisingly robust and useful for the analysis of arbitrary reflectors, particularly when the near-field is desired and surface derivatives are not known. Because of its simplicity, the algorithm has proven to be extremely easy to adapt to the parallel computing architecture of a modest number of large-grain computing elements such as are used in the Intel iPSC and Touchstone Delta parallel machines.

Imbriale, W. A.↗
NASA NTRS1992

A beamwaveguide design for high-power applications

A beam waveguide (BWG) design suitable for high-power applications is described. The design features a transmit-only, four-port high-gain horn as input to a BWG system with a single parabolic mirror and three flat plates. The use of a single parabolic mirror is such that the highest field concentration is no greater than that caused by the horn itself. The horn is linearly polarized and a grid reflector is used to reflect the orthogonal polarization into the receive feed. A rotatable dual polarizer provides for arbitrary transmit polarization. The dual-reflector system is shaped to provide uniform illumination over the main reflector and therefore maximum gain for the given size aperture. Measured data from a scale model BWG system are presented.

Imbriale, W. A.↗
NASA NTRS1990

Linear-phase approximation in the triangular facet near-field physical optics computer program

Analyses of reflector antenna surfaces use a computer program based on a discrete approximation of the radiation integral. The calculation replaces the actual surface with a triangular facet representation; the physical optics current is assumed to be constant over each facet. Described here is a method of calculation using linear-phase approximation of the surface currents of parabolas, ellipses, and shaped subreflectors and compares results with a previous program that used a constant-phase approximation of the triangular facets. The results show that the linear-phase approximation is a significant improvement over the constant-phase approximation, and enables computation of 100 to 1,000 lambda reflectors within a reasonable time on a Cray computer.

Imbriale, W. A.↗
NASA NTRS1987

DSS 43 antenna gain analysis for Voyager Uranus encounter: 8.45-GHz radio science data correction

A malfunction of the Deep Space Network (DSN) 64-meter antenna in Australia forced the antenna to operate with a mispositioned subreflector during the Voyager Uranus encounter period (January 24, 1986). Because of changing main reflector shape and quadripod position as a function of elevation angle, the antenna gain and pointing were not as expected, and the 8.45 GHz received signal level changed during the pass. The study described here used the Geometrical Theory of Diffraction (GTD) analysis to determine actual antenna gain and pointing during that period in an attempt to reconstruct the radio science data. It is found that the 1.4 dB of signal variation can be accounted for by antenna geometry changes and pointing error. Suggested modifications to the values measured during the pass are presented. Additionally, an extremely useful tool for the analysis of gravity deformed reflectors was developed for use in future antenna design and analysis projects.

Slobin, S. D.↗
NASA NTRS1987

Ka-band (32-GHz) performance of 70-meter antennas in the Deep Space Network

Two models are provided of the Deep Space Network (DSN) 70 m antenna performance at Ka-band (32 GHz) and, for comparison purposes, one at X-band (8.4 GHz). The baseline 70 m model represents expected X-band and Ka-band performance at the end of the currently ongoing 64 m to 70 m mechanical upgrade. The improved 70 m model represents two sets of Ka-band performance estimates (the X-band performance will not change) based on two separately developed improvement schemes: the first scheme, a mechanical approach, reduces tolerances of the panels and their settings, the reflector structure and subreflector, and the pointing and tracking system. The second, an electronic/mechanical approach, uses an array feed scheme to compensate fo lack of antenna stiffness, and improves panel settings using microwave holographic measuring techniques. Results are preliminary, due to remaining technical and cost uncertainties. However, there do not appear to be any serious difficulties in upgrading the baseline DSN 70 m antenna network to operate efficiently in an improved configuration at 32 GHz (Ka-band). This upgrade can be achieved by a conventional mechanical upgrade or by a mechanical/electronic combination. An electronically compensated array feed system is technically feasible, although it needs to be modeled and demonstrated. Similarly, the mechanical upgrade requires the development and demonstration of panel actuators, sensors, and an optical surveying system.

Imbriale, W. A.↗
NASA NTRS1986

Array feed synthesis for correction of reflector distortion and Vernier Beamsteering

An algorithmic procedure for the synthesis of planar array feeds for paraboloidal reflectors is described which simultaneously provides electronic correction of systematic reflector surface distortions as well as a Vernier electronic beamsteering capability. Simple rules of thumb for the optimum choice of planar array feed configuration (i.e., number and type of elements) are derived from a parametric study made using the synthesis procedure. A number of f/D ratios and distortion models were examined that are typical of large paraboloidal reflectors. Numerical results are presented showing that, for the range of distortion models considered, good on-axis gain restoration can be achieved with as few as seven elements. For beamsteering to +/- 1 beamwidth (BW), 19 elements are required. For arrays with either 7 or 19 elements, the results indicate that the use of high-aperture-efficiency elements (e.g., disk-on-rod and short backfire) in the array yields higher system gain than can be obtained with elements having lower aperture efficiency (e.g., open-ended waveguides). With 37 elements, excellent gain and beamsteering performance to +/- 1.5 BW are obtained independent of the assumed effective aperture of the array element. An approximate expression is derived for the focal-plane field distribution of the distorted reflector. Contour plots of the focal-plane fields are also presented for various distortion and beam scan angle cases. The results obtained show the effectiveness of the array feed approach.

Blank, S. J.↗
NASA NTRS1985

The Effects of Mode Impurity of Ka-band System Performance

Problems associated with spurious mode generation in the proposed Ka-Band gyroklystron transmitter tube, overmoded transmission line, and feed are discussed. A brief description of the overall problem is presented. The theory used to evaluate feed and antenna performance when spurious modes are present is given. Results for feed patterns and overall antenna patterns for various levels and types of spurious modes are presented. Worst case antenna efficiency is calculated as a function of spurious mode level. Conclusions are drawn regarding the results of this study and their application to specifications on the transmitter tube and transmission line system.

Hoppe, D. J.↗
NASA NTRS1985

Interpolation Methods for GTD Analysis of Shaped Reflectors

The finding of smooth analytic representations for antenna reflector surfaces which are prescribed only by discretized data obtained by various synthesis methods is examined. Frequently the data are distributed in a nonuniform grid and contain noise. The smoothness required is to C sub 1 for physical optics diffraction analysis and to C sub 2 for geometrical theory of diffraction (GTD) analysis. The GTD analysis approach requires a surface description which returns data very rapidly. Two methods of interpolation, the global and the local methods, are discussed. They each have advantages and disadvantages; characteristics are discussed and examples are presented.

Galindo-Israel, V.↗
NASA NTRS1984

High Power K Sub a -band Transmitter for Planetary Radar and Spacecraft Uplink

A proposed conceptual design of a 400 kW continuous wave (CW)K sub a band transmitter and associated microwave components to be used for planetary radar and serve as a prototype for future spacecraft uplinks is discussed. System requirements for such a transmitter are presented. Performance of the proposed high-power millimeter wave tube, the gyroklystron is discussed. Parameters of the proposed power amplifier, beam supply, and monitor and control devices are also presented. Microwave transmission line components consisting of signal monitoring devices, signal filtering devices, and an overmoded corrugated feed are discussed. Finally, an assessment of the state of the art technology to meet the system requirements is given and possible areas of difficulty are summarized.

Bhanji, A. M.↗
NASA NTRS1983

Satellite communication antenna technology

A general overview of current technology in the field of communication satellite antennas is presented. Among the topics discussed are: the design of multiple beam systems; frequency reuse; and polarization control of antenna measurements. Consideration is also given to: contour beam synthesis; dual shaped reflector synthesis; beam shaping; and offset reflector design. The applications of the above technologies to present and future generations of communications satellites is considered, with emphasis given to such systems as: the Intelsats; the Defense Satellite Communications System, (DSCS-III); Satellite Business System (SBS), and Comstar.

Mittra, R.↗
NASA NTRS1983

Phased arrays for satellites and the TDRSS antennas

The design and performance of satellite phased-array systems are examined by considering several specific antennas built for spacecraft use. Particular consideration is given to: (1) the JARED (Jammer Reduction Antenna System) antenna, and adaptive phased array which can be used to null jammer signals while providing coverage to specific user areas; (2) the algorithm used in the JARED antenna; and (3) a technique that can be used to detect and locate jammers. The antennas used by the Tracking and Data Relay Satellite System (TDRSS) are then described. A significant aspect of the TDRSS is the multiple access antenna which is a 30-element phased array, providing a single steered beam on transmit and the ability to receive data from 20 simultaneous users. Also included on the TDRSS is a mesh deployable reflector and a C-band and K-band communications system.

Imbriale, W. A.↗