Engineering Papers⌕ Search

Engineering topics

Ilyin, Yuri

Publications and source records attributed to Ilyin, Yuri.

Testing of the ITER Central Solenoid Modules

The ITER Central Solenoid is under fabrication by the U.S. ITER organization and its subcontractors. U.S. ITER will supply seven modules to ITER IO, six of which will be assembled in a stack that forms the ITER Central Solenoid. The first modules that were built by GA at their facility, went into high voltage testing, including Paschen testing in the vacuum, and then they were tested at 4.5 K and up to 40 kA to demonstrate compliance of the coil with the ITER requirements. In this article, we present the Test Plan and results of the central solenoid (CS) module’s performance, especially at the full current. We measured critical temperatures in several pancakes, we measured ac losses, joint resistance, and hydraulic characteristics of the coils. We also measured displacements of the coil height and hoop strain of the CS module (CSM) to verify the structural mechanical characteristics of the coil along with the cooldown shrinkage of the coil. We studied the performance of the cowound quench detectors and confirmed their effectiveness in the suppression of inductive noise. This information is necessary for verification of the stack behavior of CS in ITER operation. The test results and preliminary analyses are presented, compared to expectations, and discussed.

Martovetsky, Nicolai↗

First ITER CS module test results

The ITER Central Solenoid (CS) is under fabrication by the US ITER organization and its subcontractors. US ITER will supply seven modules to ITER IO, six of which will be assembled in a stack that forms the ITER Central Solenoid, with one as a spare. The first module fabrication has been completed by General Atomics (GA) at their facility and has begun testing including high voltage testing, Paschen testing in the vacuum and then testing at 4.5 K and up to 40 kA in order to demonstrate compliance of the coil to ITER requirements. In the paper we present the Test Plan and results of the CS Module performance tests, especially at 40 kA current. Herein, AC losses, joint resistances and hydraulic characteristics of the coil are all measured. Displacements of the coil height and hoop strain of the CS Module are also measured to verify structural and mechanical characteristics of the coil along with cooldown shrinkage of the coil. This information is used for verification of the stack behavior of CS in ITER operation. The test results and preliminary analyses results are presented, compared to expectations, and discussed. All measured parameters suggest that the CS module will perform well in ITER machine.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural analysis of ITER magnet feeders

This paper summarizes the results of the static structural analyses, which were conducted in support of the ITER magnet feeder design with the aim of validating certain components against the structural design criteria. While almost every feeder has unique features, they all share many common constructional elements and the same functional specifications. The analysis approach to assess the load conditions and stresses that have driven the design is equivalent for all feeders, except for particularities that needed to be modeled in each case. The mechanical analysis of the feeders follows the sub-modeling approach: the results of the global mechanical model of a feeder assembly are used as input for the detailed models of the feeder' sub-assemblies or single components. Examples of such approach, including the load conditions, stress assessment criteria and solutions for the most critical components, are discussed. It has been concluded that the feeder system is safe in the referential operation scenarios. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗