Engineering Papers⌕ Search

Engineering topics

Hwang, Helen

Publications and source records attributed to Hwang, Helen.

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Sustaining Mature Entry System Technologies Crucial for Future In-Situ Venus Missions

Severe entry environments at Venus are a key challenge for all missions employing probes, landers, areal platforms, aerocapture and atmospheric skimming. Three specific mature technologies, PICA, HEEET, and ADEPT, are enablers for Venus in-situ missions but are at risk of atrophy or loss if not maintained. All three technologies were NASA-developed in partnership with US industry and rely on both organizations for intellectual property. These technologies are needed only for NASA missions and lack applicability elsewhere. NASA has experienced the loss of prior TPS technologies due to lack of use, including Apollo’s Avcoat (re-created at enormous expense for Orion) and Pioneer-Venus’ heritage carbon phenolic. Given the low flight cadence for planetary entry missions overall and the lack of non-NASA uses for these technologies, there is a real concern for the sustainment of key entry technologies.

Venakatapathy, Ethiraj↗
NASA NTRS2018

Sizing and Margins Assessment of the Mars2020 Acusil-II Thermal Protection System

The Mars2020 entry vehicle is currently being developed by NASA to safely land its next rover on the Martian surface in 2021. The vehicle will be protected from entry aeroheating using three different TPS materials: PICA tiles on the forebody, SLA-561V on the backshell and Acusil-II on the parachute close-out cone (PCC) and its backshell interface plate (BIP). Mars2020's entry vehicle and TPS design is identical to the Mars Science Laboratory, NASA's last Mars lander; therefore, the purpose of this study is to assess the adequacy of the existing TPS design and thickness for Mars2020 predicted environments. This study focuses on sizing and margin assessment of Acusil-II TPS on the PCC and BIP. The methodology and analysis techniques that were used for assessing thermal margins are reviewed. Analysis assumptions and limitations are discussed in detail. Thermal sizing is performed at different locations and results are presented.

Acusil↗
NASA NTRS2018

Estimation of Heatshield Mass Loss for Mars 2020 Entry Vehicle

The Mars2020 entry vehicle is currently being developed by NASA to safely land its next rover on the Martian surface in 2021. During entry, the vehicle will be protected from aerothermal environments using a PICA (Phenolic Impregnated Carbon Ablator)-tiled heatshield. PICA loses mass through surface recession and in-depth pyrolysis as it is heated. Pre-flight knowledge of heatshield mass loss is required for vehicle balancing during critical mission events. This study attempts to predict the total mass loss experienced by the Mars2020's heatshield during its entry. A grid was created over the half of the heatshield which generated 108 points across a total of 9 spokes. Aero-thermal environments were provided from CFD (Computational Fluid Dynamics) calculations that considered a baselined trajectory. The TPS (Thermal Protection System) stack was a build-up of composite, aluminum, composite, an HT-424 bond, followed by PICA. The FIAT (Fully Implicit Ablation, Thermal-response) 1-D analysis utilized this TPS stack and the CFD environments and was run at each grid point giving mass flux information from the point of atmospheric entry until parachute deployment. The mass flux due to recession and pyrolysis gas was summed and integrated first through time and then across the half heatshield using a polar integration tool. The mass loss results were mirrored to the other half of the heatshield to calculate total mass loss throughout the entry phase of flight. This total mass loss value and its distribution was used by entry vehicle designers to account for CG (Center of Gravity) offset during parachute descent when the heatshield is no longer losing significant mass.

PICA↗
NASA NTRS2017

Mars 2020 Entry, Descent, and Landing Instrumentation 2 (MEDLI2) Sensor Suite

The Mars 2020 Entry, Descent, and Landing Instrumentation 2 (MEDLI2) sensor suite seeks to address the aerodynamic, aerothermodynamic, and thermal protection system (TPS) performance issues during atmospheric entry, descent, and landing of the Mars 2020 mission. Based on the highly successful instrumentation suite that flew on Mars Science Laboratory (MEDLI), the new sensor suite expands on the types of measurements and also seeks to answer questions not fully addressed by the previous mission. Sensor Package: MEDLI2 consists of 7 pressure transducers, 17 thermal plugs, 2 heat flux sensors, and one radiometer. The sensors are distributed across both the heatshield and backshell, unlike MEDLI (the first sensor suite), which was located solely on the heat-shield. The sensors will measure supersonic pressure on the forebody, a pressure measurement on the aftbody, near-surface and in-depth temperatures in the heatshield and backshell TPS materials, direct total heat flux on the aftbody, and direct radiative heating on the aftbody. Instrument Development: The supersonic pressure transducers, the direct heat flux sensors, and the radiometer all were tested during the development phase. The status of these sensors, including the piezo-resistive pressure sensors, will be presented. The current plans for qualification and calibration for all of the sensors will also be discussed. Post-Flight Data Analysis: Similar to MEDLI, the estimated flight trajectory will be reconstructed from the data. The aerodynamic parameters that will be reconstructed will be the axial force coefficient, freestream Mach number, base pressure, atmospheric density, and winds. The aerothermal quantities that will be determined are the heatshield and backshell aero-heating, turbulence transition across the heatshield, and TPS in-depth performance of PICA. By directly measuring the radiative and total heat fluxes on the back-shell, the convective portion of the heat flux will be estimated. The status of the current tools to perform the post-flight data analysis will be presented, along with plans for model improvements.

Hwang, Helen↗
NASA NTRS2014

Atmospheric Entry Studies for Uranus

To better understand the technology requirements for a Uranus atmospheric entry probe, an internal NASA study was conducted. The main objectives for this study were: (1) to determine the entry trade space through parametric studies; and (2) to identify entry technologies that could be used to enable a mission that would meet at least the Tier 1 science objectives described in the Decadal Survey. The paper describes two different approaches to the planet: 1) direct ballistic entry 2) aerocapture followed by direct entry of probe. For direct ballistic entry the trajectory analyses were performed for a range of entry flight path angles and ballistic coefficients. The larger size probes was also considered in an attempt to enable Tier 2 science objectives. For aerocapture analysis a single case was studied to demonstrate feasibility and benefits with this option. A summary of all of the above analyses, including factors that constrain allowable entry trajectories, is presented

Atmospheric entry↗
NASA NTRS2013

Atmospheric Entry Studies for Uranus

The Objectives of this work are: 1) Establish a range of probe atmospheric entry environments based on the Uranus Flagship mission outlined in the Planetary Science Decadal Survey for two launch windows: Year 2021 and 2034. 2) Define Uranus entry trade space by performing parametric studies, by varying vehicle mass and size and entry Flight Path Angle (FPA). 3) Investigate various trajectory options, including direct ballistic entry and aero-capture entry. 4) Identify entry technologies that could be leveraged to enable a viable mission to Uranus that meets science objectives.

Thermal protection material↗
NASA NTRS2010

Development of Thermal Protection Materials for Future Mars Entry, Descent and Landing Systems

Entry Systems will play a crucial role as NASA develops the technologies required for Human Mars Exploration. The Exploration Technology Development Program Office established the Entry, Descent and Landing (EDL) Technology Development Project to develop Thermal Protection System (TPS) materials for insertion into future Mars Entry Systems. An assessment of current entry system technologies identified significant opportunity to improve the current state of the art in thermal protection materials in order to enable landing of heavy mass (40 mT) payloads. To accomplish this goal, the EDL Project has outlined a framework to define, develop and model the thermal protection system material concepts required to allow for the human exploration of Mars via aerocapture followed by entry. Two primary classes of ablative materials are being developed: rigid and flexible. The rigid ablatives will be applied to the acreage of a 10x30 m rigid mid L/D Aeroshell to endure the dual pulse heating (peak approx.500 W/sq cm). Likewise, flexible ablative materials are being developed for 20-30 m diameter deployable aerodynamic decelerator entry systems that could endure dual pulse heating (peak aprrox.120 W/sq cm). A technology Roadmap is presented that will be used for facilitating the maturation of both the rigid and flexible ablative materials through application of decision metrics (requirements, key performance parameters, TRL definitions, and evaluation criteria) used to assess and advance the various candidate TPS material technologies.

Cassell, Alan M.↗
NASA NTRS2007

Overview of the MEDLI Project

The Mars Science Laboratory Entry, Descent, and Landing Instrumentation (MEDLI) Project's objectives are to measure aerothermal environments, sub-surface heatshield material response, vehicle orientation, and atmospheric density for the atmospheric entry and descent phases of the Mars Science Laboratory (MSL) entry vehicle. The flight science objectives of MEDLI directly address the largest uncertainties in the ability to design and validate a robust Mars entry system, including aerothermal, aerodynamic and atmosphere models, and thermal protection system (TPS) design. The instrumentation suite will be installed in the heatshield of the MSL entry vehicle. The acquired data will support future Mars entry and aerocapture missions by providing measured atmospheric data to validate Mars atmosphere models and clarify the design margins for future Mars missions. MEDLI thermocouple and recession sensor data will significantly improve the understanding of aeroheating and TPS performance uncertainties for future missions. MEDLI pressure data will permit more accurate trajectory reconstruction, as well as separation of aerodynamic and atmospheric uncertainties in the hypersonic and supersonic regimes. This paper provides an overview of the project including the instrumentation design, system architecture, and expected measurement response.

Gazarik, Michael J.↗
NASA NTRS1999

Feature Profile Evolution of SiO2 Trenches In Fluorocarbon Plasmas

Etching of silicon microstructures for semiconductor manufacturing in chlorine plasmas has been well characterized. The etching proceeds in a two-part process, where the chlorine neutrals passivate the Si surface and then the ions etch away SiClx. However, etching in more complicated gas mixtures and materials, such as etching of SiO2 in Ar/C4F8, requires knowledge of the ion and neutral distribution functions as a function of angle and velocity, in addition to modeling the gas surface reactions. In order to address these needs, we have developed and integrated a suite of models to simulate the etching process from the plasma reactor level to the feature profile evolution level. This arrangement allows for a better understanding, control, and prediction of the influence of equipment level process parameters on feature profile evolution. We are currently using the HPEM (Hybrid Plasma Equipment Model) and PCMCM (Plasma Chemistry Monte Carlo Model) to generate plasma properties and ion and neutral distribution functions for argon/fluorocarbon discharges in a GEC Reference Cell. These quantities are then input to the feature scale model, Simulation of Profile Evolution by Level Sets (SPELS). A surface chemistry model is used to determine the interaction of the incoming species with the substrate material and simulate the evolution of the trench profile. The impact of change of gas pressure and inductive power on the relative flux of CFx and F to the wafer, the etch and polymerization rates, and feature profiles will be examined. Comparisons to experimental profiles will also be presented.

Hwang, Helen↗
NASA NTRS1998

Simulation of Etching Profiles Using Level Sets

Using plasma discharges to etch trenches and via holes in substrates is an important process in semiconductor manufacturing. Ion enhanced etching involves both neutral fluxes, which are isotropic, and ion fluxes, which are anisotropic. The angular distributions for the ions determines the degree of vertical etch, while the amount of the neutral fluxes determines the etch rate. We have developed a 2D profile evolution simulation which uses level set methods to model the plasma-substrate interface. Using level sets instead of traditional string models avoids the use of complicated delooping algorithms. The simulation calculates the etch rate based on the fluxes and distribution functions of both ions and neutrals. We will present etching profiles of Si substrates in low pressure (10s mTorr) Ar/Cl2 discharges for a variety of incident ion angular distributions. Both ion and neutral re-emission fluxes are included in the calculation of the etch rate, and their contributions to the total etch profile will be demonstrated. In addition, we will show RIE lag effects as a function of different trench aspect ratios. (For sample profiles, please see http://www.ipt.arc.nasa.gov/hwangfig1.html)

Hwang, Helen↗