Engineering Papers⌕ Search

Engineering topics

Hussain, Zahid

Publications and source records attributed to Hussain, Zahid.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Development of deflector mode for spin-resolved time-of-flight photoemission spectroscopy

Spin- and angle-resolved photoemission spectroscopy (“spin-ARPES”) is a powerful technique for probing the spin degree-of-freedom in materials with nontrivial topology, magnetism, and strong correlations. Spin-ARPES faces severe experimental challenges compared to conventional ARPES attributed to the dramatically lower efficiency of its detection mechanism, making it crucial for instrumentation developments that improve the overall performance of the technique. Here in this paper, we demonstrate the functionality of our spin-ARPES setup based on time-of-flight spectroscopy and introduce our recent development of an electrostatic deflector mode to map out spin-resolved band structures without sample rotation. We demonstrate the functionality by presenting the spin-resolved spectra of the topological insulator Bi2Te3 and describe in detail the spectrum calibrations based on numerical simulations. By implementing the deflector mode, we minimize the need for sample rotation during measurements, hence improving the overall efficiency of experiments on small or inhomogeneous samples.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Electronic structure of p -type transparent conducting oxide CuAlO 2

We report copper-based delafossite oxides are excellent candidates for the p-type transparent conducting oxide (TCO), which is essential in realizing transparent semiconductor applications. Using angle-resolved photoemission spectroscopy (ARPES), we report the low-energy electronic structure of CuAlO 2 . We found that the band structure near the valence band top is characterized by hole bands with their maxima along the Brillouin zone boundary. Furthermore, the effective masses along the Γ–M and Γ–K directions were found to be (0.6 ± 0.1) m0 and (0.9 ± 0.1) m 0 , respectively, which impose an important benchmark against the existing band calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Amorphous nonstoichiometric oxides with tunable room-temperature ferromagnetism and electrical transport

Material functionalities strongly depend on the stoichiometry, crystal structure, and homogeneity. Here we demonstrate an approach of amorphous nonstoichiometric inhomogeneous oxides to realize tunable ferromagnetism and electrical transport at room temperature. In order to verify the origin of the ferromagnetism, we employed a series of structural, chemical, and electronic state characterizations. Combined with electron microscopy and transport measurements, synchrotron-based grazing incident wide angle X-ray scattering, soft X-ray absorption and circular dichroism clearly reveal that the room-temperature ferromagnetism originates from the In 0.23 Co 0.77 O 1-v amorphous phase with a large tunable range of oxygen vacancies. The room-temperature ferromagnetism is tunable from a high saturation magnetization of 500 emu cm -3 to below 25 emu cm -3 , with the evolving electrical resistivity from 5 × 10 3 μΩ cm to above 2.5 × 10 5 μΩ cm. Inhomogeneous nano-crystallization emerges with decreasing oxygen vacancies, driving the system towards non-ferromagnetism and insulating regime. Our work unfolds the novel functionalities of amorphous nonstoichiometric inhomogeneous oxides, which opens up new opportunities for developing spintronic materials with superior magnetic and transport properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Disparate Exciton-Phonon Couplings for Zone-Center and Boundary Phonons in Solid-State Graphite

The exciton-phonon coupling in highly oriented pyrolytic graphite is studied using resonant inelastic x-ray scattering (RIXS) spectroscopy. With ~70 meV energy resolution, multiple low energy excitations associated with coupling to phonons can be clearly resolved in the RIXS spectra. Here, using resonance dependence and the closed form for RIXS cross section without considering the intermediate state mixing of phonon modes, the dimensionless coupling constant g is determined to be 5 and 0.35, corresponding to the coupling strength of 0.42 eV+/-20 meV and 0.20 eV+/-20 meV, for zone center and boundary phonons, respectively. The reduced g value for the zone-boundary phonon may be related to its double resonance nature.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Momentum-resolved resonant inelastic soft X-ray scattering (qRIXS) endstation at the ALS

A momentum resolved resonant inelastic X-ray scattering (qRIXS) experimental station with continuously rotatable spectrometers and parallel detection is designed to operate at different beamlines at synchrotron and free electron laser (FEL) facilities. This endstation, currently located at the Advanced Light Source (ALS), has five emission ports on the experimental chamber for mounting the high-throughput modular soft X-ray spectrometers (MXS). Coupled to the rotation from the supporting hexapod, the scattered X-rays from 27.5° (forward scattering) to 152.5° (backward scattering) relative to the incident photon beam can be recorded, enabling the momentum-resolved RIXS spectroscopy. The components of this endstation are described in details, and the preliminary RIXS measurements on highly oriented pyrolytic graphite (HOPG) reveal the low energy vibronic excitations from the strong electron-phonon coupling at C K edge around σ* band. Lastly, the grating upgrade option to enhance the performance at low photon energies is presented and the potential of this spectroscopy is discussed in summary.

36 MATERIALS SCIENCE↗
DOE OSTI2019

A setup for extreme-ultraviolet ultrafast angle-resolved photoelectron spectroscopy at 50-kHz repetition rate

Time- and angle-resolved photoelectron spectroscopy (trARPES) is a powerful method to track the ultrafast dynamics of quasiparticles and electronic bands in energy and momentum space. We present a setup for trARPES with 22.3 eV extreme-ultraviolet (XUV) femtosecond pulses at 50-kHz repetition rate, which enables fast data acquisition and access to dynamics across momentum space with high sensitivity. The design and operation of the XUV beamline, pump-probe setup, and ultra-high vacuum endstation are described in detail. By characterizing the effect of space-charge broadening, we determine an ultimate source-limited energy resolution of 60 meV, with typically 80-100 meV obtained at 1-2 × 10 10 photons/s probe flux on the sample. The instrument capabilities are demonstrated via both equilibrium and time-resolved ARPES studies of transition-metal dichalcogenides. The 50-kHz repetition rate enables sensitive measurements of quasiparticles at low excitation fluences in semiconducting MoSe 2 , with an instrumental time resolution of 65 fs. Moreover, photo-induced phase transitions can be driven with the available pump fluence, as shown by charge density wave melting in 1T-TiSe 2 . The high repetition-rate setup thus provides a versatile platform for sensitive XUV trARPES, from quenching of electronic phases down to the perturbative limit.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Efficient charge generation from triplet excitons in metal-organic heterojunctions

The success of many emerging molecular electronics concepts hinges on an atomistic understanding of the underlying electronic dynamics. We employ picosecond time-resolved x-ray photoemission spectroscopy (tr-XPS) to elucidate the roles of singlet and triplet excitons for photoinduced charge generation at a copper-phthalocyanine-C 60 heterojunction. Contrary to common belief, fast intersystem crossing to triplet excitons after photoexcitation is not a loss channel but contributes to a significantly larger extent to the time-integrated interfacial charge generation than the initially excited singlet excitons. The tr-XPS data provide direct access to the diffusivity of the triplet excitons D CuPc =(1.8±1.2)×10 -5 cm 2 /s (where CuPc is copper-phthalocyanine) and their diffusion length L diff =(8±3)nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Dissociate Lattice Oxygen Redox Reactions from Capacity and Voltage Drops of Battery Electrodes

The oxygen redox (OR) reaction is a promising concept for improving battery energy density, however oxygen activities are generally considered detrimental to the stability and kinetics of batteries. Studies of OR activities often mix the lattice OR with other oxygen-involved reactions, such as gas release, radical oxygen evolution and surface reactions, further shadowing the true property of the practically meaningful lattice OR activities. Here, based on high-efficiency mapping of resonant inelastic X-ray scattering (mRIXS) of both the transition-metals and oxygen, we distinguish and quantify the lattice OR activities Na 0.6 [Li 0.2 Mn 0.8 ]O 2 .

25 ENERGY STORAGE↗
DOE OSTI2018

Stabilizing the Meniscus for Operando Characterization of Platinum During the Electrolyte-Consuming Alkaline Oxygen Evolution Reaction

Achieving a molecular-level understanding of interfacial (photo)electrochemical processes is essential in order to tailor novel and highly-performing catalytic systems. The corresponding recent development of in situ and operando tools has posed new challenges on experimental architectures. In this study, we use ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to probe the solid/liquid electrified interface of a polycrystalline Pt sample in contact with an alkaline electrolyte during hydrogen and oxygen evolution reactions. Using the “dip-and-pull” technique to probe the interface through a thin liquid layer generated on the sample surface, we observe that the electrolyte meniscus becomes unstable under sustained driving of an electrolyte-consuming reaction (such as water oxidation). The addition of an electrochemically inert supporting electrolyte mitigates this issue, maintaining a stable meniscus layer for prolonged reaction times. In contrast, for processes in which the electrolyte is replenished in the reaction pathway (i.e. water reduction in alkaline conditions), we find that the solid/liquid interface remains stable without addition of a secondary supporting electrolyte. The approach described in this work allows the extension of operando AP-XPS capabilities using the “dip-and-pull” method to a broader class of reactions consuming ionic species during complex interfacial faradaic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Spectroscopic Signature of Oxidized Oxygen States in Peroxides

Here, recent debates on the oxygen redox behaviors in battery electrodes have triggered a pressing demand for the reliable detection and understanding of nondivalent oxygen states beyond conventional absorption spectroscopy. Here, enabled by high-efficiency mapping of resonant inelastic X-ray scattering (mRIXS) coupled with first-principles calculations, we report distinct mRIXS features of the oxygen states in Li 2 O, Li 2 CO 3 , and especially, Li 2 O 2 , which are successfully reproduced and interpreted theoretically. mRIXS signals are dominated by valence-band decays in Li 2 O and Li 2 CO 3 . However, the oxidized oxygen in Li 2 O 2 leads to partially unoccupied O-2p states that yield a specific intraband excitonic feature in mRIXS. Such a feature displays a specific emission energy in mRIXS, which disentangles the oxidized oxygen states from the dominating transition-metal/oxygen hybridization features in absorption spectroscopy, thus providing critical hints for both detecting and understanding the oxygen redox reactions in transition-metal oxide based battery materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Persistent Charge-Density-Wave Order in Single-Layer TaSe 2

Understanding the collective electronic phases of two-dimensional (2D) materials requires a comprehensive investigation of the relation between lattice symmetry and electronic structure1-3. Single layers of transition metal dichalcogenides (TMDs) provide a material platform to study collective states such as charge density wave (CDW) and superconductivity4-7. By combining angle-resolved photoemission spectroscopy (ARPES), scanning tunneling microscopy/spectroscopy (STM/STS), and density functional theory (DFT) calculations, we present the electronic characterization of single-layer 1H-TaSe2 grown by molecular beam epitaxy (MBE). We demonstrate that 3×3 CDW order persists despite distinct changes in the low energy electronic structure highlighted by a reduction in the number of bands crossing the Fermi energy (EF) and corresponding modification of Fermi surface (FS) topology. Enhanced spin orbit coupling and lattice distortion in the single-layer limit play a crucial role in the formation of CDW order. Our findings provide a deeper understanding of the nature of CDW order in the 2D limit.

2D materials↗
DOE OSTI2017

Monochromatic Photocathodes from Graphene-Stabilized Diamondoids

The monochromatic photoemission from diamondoid monolayers provides a new strategy to create electron sources with low energy dispersion and enables compact electron guns with high brightness and low beam emittance for aberration-free imaging, lithography, and accelerators. However, these potential applications are hindered by degradation of diamondoid monolayers under photon irradiation and electron bombardment. Here, we report a graphene-protected diamondoid monolayer photocathode with 4-fold enhancement of stability compared to the bare diamondoid counterpart. The single-layer graphene overcoating preserves the monochromaticity of the photoelectrons, showing 12.5 meV ful width at half-maximum distribution of kinetic energy. Importantly, the graphene coating effectively suppresses desorption of the diamondoid monolayer, enhancing its thermal stability by at least 100 K. Furthermore, by comparing the decay rate at different photon energies, we identify electron bombardment as the principle decay pathway for diamondoids under graphene protection. As a result, this provides a generic approach for stabilizing volatile species on photocathode surfaces, which could greatly improve performance of electron emitters.

36 MATERIALS SCIENCE↗