Engineering Papers⌕ Search

Engineering topics

Hupp, Joseph T.

Publications and source records attributed to Hupp, Joseph T..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Active-Site Determination and Mechanistic Insights in a MOF-Supported Polymerization Catalyst

The structural elucidation of catalyst active sites in heterogeneous catalysts when supported by traditional metal oxides remains a challenge despite the advanced characterization techniques that have been developed. The catalyst-deposition-site nonuniformity in metal oxides inhibits clear structural characterization through bulk spectroscopic methods and rules out the use of single-crystal X-ray diffraction. However, for metal-organic framework (MOF)-supported catalysts, the crystallinity and uniform structures of the underlying support enhance our ability to identify the precatalyst and catalytically active sites and open the door to using single-crystal X-ray diffraction coupled with spectroscopy under reaction conditions. Additionally, the use of in situ X-ray absorption spectroscopy identifies the catalytically active site in diethylaluminum chloride (DEAC)-pretreated Cr-SIM-NU-1000 to be a Cr-ethyl when used for ethylene polymerization. Further kinetic experiments elucidate the effects of ethylene pressure, temperature, catalyst loading, and cocatalyst loading, furthering mechanistic knowledge and helping to deconvolute the structure-function relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Toward Ideal Metal–Organic Framework Thin-Film Growth via Automated Layer-by-Layer Deposition: Examples Based on Perylene Diimide Linkers

Photoactive metal-organic framework (MOF) thin films offer an opportunity for translating the advantages of periodic, crystalline, and tailorable light-harvesting materials directly into devices such as those for photoelectrochemical solar energy conversion. In this study, we report the fabrication of light-absorbing perylene-diimide-containing pillared-paddlewheel MOF thin films using an automated layer-by-layer (LbL) deposition technique. Our focus here is on optimizing the growth of representative chromophoric MOFs as oriented films of uniform and predefined thickness. Growth was examined as a function of metal identity, pillaring ligand composition, and supporting-surface chemical functionality. Further, application of atomic force microscopy (AFM) and complementary techniques revealed that the surface-supported MOFs initially display island-type film growth (Volmer-Weber growth), resulting in comparatively rough films. Further growth is accompanied by the merging of islands, resulting in films that, depending on experimental details, can be remarkably smooth (i.e., roughness on the order of ±1 nm (one structural repeat unit in the pillaring direction)). These details include the use of 1,4-diazabicyclo[2.2.2]octane (DABCO) as a MOF pillar and ALD-grown zinc oxide as a film support (ALD = atomic layer deposition). Also helpful for mitigating island-type growth, at least in part, is the replacement of Zn 2+ by Cu 2+ as the metal component of the MOF. Notably, each of these adjustments entails replacing weaker chemical bonds with stronger ones.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the Product Distribution of Acetylene Dimerization through Bimetallic Metal–Organic Framework-Supported Nanoporous Systems

Metal-organic frameworks (MOFs) are receiving increased attention due to their well-defined structures that allow the determination of structure-property relationships. MOFs have been used as heterogeneous catalyst supports in a variety of fashions including for confinement of metal nanoparticles, which have demonstrated enhanced resistance to aggregation, a common issue in amorphous metal oxide supports. Cu and In catalysts were installed in the Zr-based MOF NU-907, being confined within the nanoporous structure. The Cu catalyst is known to, under various conditions, either selectively hydrogenate acetylene to ethylene or generate C4 products such as butenes and 1,3-butadiene, an important feedstock for rubber and adhesives. The addition of indium to the Cu catalyst is intended to serve as a promoter to produce C4 products by decreasing the surface coverage of copper while still allowing for C-C coupling. When employed for acetylene dimerization, InCu-NU-907 shows slightly decreased C4 production overall but enhanced 1,3-butadiene production compared to all other catalysts studied herein. These catalysts were thoroughly characterized by a range of techniques to confirm structural integrity and porosity and probe the nature of the interactions of indium with the Cu nanoparticle active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Noncovalent Surface Modification of Metal–Organic Frameworks: Unscrambling Adsorption Properties via Isothermal Titration Calorimetry

Despite the importance of noncovalent interactions in the utilization of metal–organic frameworks (MOFs), using these interactions to functionalize MOFs has rarely been explored. The ease of functionalization and potential for surface-selective functionalization makes modification via noncovalent interactions promising for the creation of porous photocatalytic assemblies. Here, using isothermal titration calorimetry, photoluminescence measurements, and desorption experiments, we have explored the nature and magnitude of the interactions of [Ru(bpy) 2 (bpy-R)] 2+ -functionalized dyes with the surface of MIL-96, where R = C 3 , C 8 , C 12 , and C 18 alkyl chains of either straight-chain or cyclic conformations. The orientation of the dyes appears to be flat against the surface with respect to the long alkyl chains, and the surface concentration approaches a monolayer at high initial concentrations of dye. Strangely, the dodecyl-functionalized dye, despite having a smaller interaction energy and larger footprint than either octyl-functionalized dye, achieves the highest maximum surface concentration. Based on photoluminescence spectra, desorption experiments, and ITC data, we believe this is due to the core of the dye being lifted from the surface as the chain length increases. Our understanding of these interactions is important for further utilization of this method for the functionalization of the internal and external surface areas of MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Presentation of gas-phase-reactant-accessible single-rhodium-atom catalysts for CO oxidation, via MOF confinement of an Anderson polyoxometalate

Geometric or electronic confinement of guests within nanoporous hosts holds promise for imparting catalytic functionality, including single-metal-atom catalytic functionality, to existing materials. When the nanoporous host is a metal–organic framework (MOF), single-metal-ion catalysts have typically been installed by grafting to an open site on an inorganic node, with the node effectively becoming the support for the catalyst. This approach, however, imposes compositional constraints, as the node not only needs to be receptive to grafting, but also must be capable of stabilizing the framework against solvent evacuation, chemical exposure, and heating. Here, we show that disk-like, Anderson polyoxometalate clusters (RhMo 6 O 24 n- and Mo 7 O 24 m- ; POMs) can be confined in pore-specific and orientation-specific fashion within the hierarchically porous, Zr(IV)-based MOF, NU1K. Self-limiting loading of one cluster per pore, and associated nano-confinement, serve to isolate each POM and prevent consolidation caused by sintering. Additionally, the oriented confinement serves to expose individual rhodium atoms to candidate gas-phase reactants, while enabling the rhodium atom to employ a well-defined oxy-molybdenum cluster, rather than a MOF node, as a support. Synchrotron-based difference-electron-density maps and differential pair-distribution-function analyses of scattered X-rays establish cluster siting and orientation and confirm isolation. Nanoconfined (i.e., MOF- and POM-confined) single-rhodium(III)-atoms are catalytically competent for an illustrative gas-phase reaction, CO oxidation by O 2 , with the MOF-isolated POM enormously outperforming nonporous, MOF-free, solid (NH 4 ) 3 [H 6 RhMo 6 O 24 ]·6H 2 O. This paper highlights the value of MOF-based nano-confinement and oriented isolation of planar POMs as a means of uniformly presenting and stabilizing potent single-metal-atom catalysts, in reactant-accessible form, on well-defined supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Insights into dual-functional modification for water stability enhancement of mesoporous zirconium metal–organic frameworks

The stability of metal–organic frameworks (MOFs) in water affects their ability to function as chemical catalysts, their capacity as adsorbents for separations in water vapor presence, and their usefulness as recyclable water harvesters. Here, we have examined water stability of four node-modified variants of the mesoporous MOF, NU-1000, namely formate-, Acac-, TFacac-, and Facac-NU-1000, comparing these with node-accessible NU-1000. These NU-1000 variants present ligands grafted to NU-1000's hexa-Zr(IV)-oxy nodes by displacing terminal aqua and hydroxo ligands. Facac-NU-1000, containing the most hydrophobic ligands, showed the greatest water stability, being able to undergo at least 20 water adsorption/desorption cycles without loss of water uptake capacity. Computational studies revealed dual salutary functions of installed Facac ligands: (1) enhancement of framework mechanical stability due to electrostatic interactions; and (2) transformation and shielding of the otherwise highly hydrophilic nodes from H-bonding interactions with free water, presumably leading to weaker channel-stressing capillary forces during water evacuation – consistent with trends in free energies of dehydration across the NU-1000 variants. Water harvesting and hydrolysis of chemical warfare agent simulants were examined to gauge the functional consequences of modification and mechanical stabilization of NU-1000 by Facac ligands. The studies revealed a harvesting capacity of ~1.1 L of water vapor per gram of Facac-NU-1000 per sorption cycle. They also revealed retention of catalytic MOF activity following 20 water uptake and release cycles. This study provides insights into the basis for node-ligand-engendered stabilization of wide-channel MOFs against collapse during water removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Carbon-efficient conversion of natural gas and natural-gas condensates to chemical products and intermediate feedstocks via catalytic metal–organic framework (MOF) chemistry

The net-zero carbon emission scenario of stopping hydrocarbon use as fuel is unlikely to end the extraction of fossil hydrocarbons. Remaining will be a sizable need for hydrocarbons as feedstocks for commodity chemicals destined for transformation into polymers, manufacturing-relevant intermediates, and value-added chemicals. Historically, the primary feedstock source has been oil. Over the past dozen years, however, fracking-based extraction of shale-trapped natural gas from known enormous reserves, in North America, has resulted in feedstock sourcing instead from wet shale gas. This shift has transformed the catalytic chemistry of commodity chemical manufacturing. In this paper, following a brief discussion of the merits and limitations of crystallographically well-defined metal–organic frameworks (MOFs) as model catalysts and catalyst-supports, we examined their applications for understanding and potentially enabling carbon-economical, catalytic transformation of C 1 , C 2 , C 3 , and C 4 components of natural gas to desirable commodity chemicals, intermediates, or model compounds.

03 NATURAL GAS↗
DOE OSTI2022

Charge transfer in mixed and segregated stacks of tetrathiafulvalene, tetrathianaphthalene and naphthalene diimide: a structural, spectroscopic and computational study

Tetrathiafulvalene (TTF) is a highly tunable electron donor that has been widely studied in charge transfer (CT) complexes, including Bechgaard salts which are superconductors at low temperatures. Its close relative, tetrathianaphthalene (TTN) has received considerably less attention than its TTF counterpart but is potentially a versatile electron donor. Three novel CT complexes containing mixed and segregated stack donor-acceptor (D–A) complexes of tetrathiafulvalene (TTF), tetrathianaphthalene (TTN) and naphthalene diimide (NDI) are reported. We demonstrate a facile mechanochemical synthesis of two salts, TTF–DPNI and TTN–DPNI (DPNI = N,N'-di-(4-pyridyl)-1,4,5,8-naphthalenetetracarboxydiimide), which is uncommon for these materials. Despite the detection of a very low partial charge transfer in the three salts using UV-Vis-NIR, Raman and EPR spectroscopies, we elucidated the properties of the TTN core with support from DFT calculations for the first time. Finally, we highlight the performance of TTN in a CT complex and demonstrate the importance of a combined approach to the characterisation of CT in organic D–A complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Incorporation of free halide ions stabilizes metal–organic frameworks (MOFs) against pore collapse and renders large-pore Zr-MOFs functional for water harvesting

Chemically and hydrolytically stable MOFs have shown promising water-vapor adsorption properties. However, MOFs that can simultaneously satisfy the following three requirements for effective water harvesting from low-humidity air are quite rare: (1) high water-uptake capacity; (2) hydrolytic and mechanical stability; (3) complete uptake at ~20–30% relative humidity (RH). Here we show that incorporating free halide ions is effective for enabling a representative Zr-MOF to meet these requirements for water harvesting. As-synthesized MOF-808 initially exhibits very good capacity at RH ≥ 30%, but quickly suffers large capacity losses due to water-evacuation-induced pore collapse. Via a framework-charging and free counter-ion inclusion approach, we were able to replace node-ligated formate anions with charge-neutral aqua ligands and site desired water-sorbing free-halide ions within the large pores of MOF-808 . In this study, altered samples show increased gravimetric water uptake, show beneficial shifts of water sorption isotherms toward lower water-vapor partial pressure, eliminate undesirable sorption/desorption isotherm hysteresis, and render MOF-808-Br indefinitely recyclable for ambient-temperature uptake of water vapor and lower-temperature liquid-water release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Redox-Hopping-Based Charge Transport Mediated by Ru(II)-Polypyridyl Species Immobilized in a Mesoporous Metal-Organic Framework

Electronic charge transport through crystalline metal-organic frameworks (MOFs) can be accomplished by site-to-site electron (or hole) hopping, provided that redox-active sites, such as easily reducible or oxidizable MOF linkers, are present. If the framework itself is redox-inert, solvent-assisted ligand incorporation of redox-active moieties can serve to enable hopping-based charge transport. Here we have studied the redox hopping process within Ru-bpy@NU-1008, where Ru-bpy is a carboxylate-functionalized derivative, i . e ., a node-ligating derivative, of the well-known chromophore Ru(2,2′-bipyridine) 3 2+ , and NU-1008 is a redox-inert MOF featuring hierarchical porosity and csq topology. Chronoamperometry experiments with electrode-supported thin films of Ru-bpy@NU-1008 show that charge transport is feasible through portions of the MOF, with other portions being inaccessible. Possible confounding features are the undersized c- pores that cross-connect 1D mesoporous channels, as ingress and egress of charge-compensating anions is believed to accompany the net oxidation of Ru(II) to Ru(III) and the reduction of Ru(III) to Ru(II). Phenomenologically, transport through the electroactive portion of the films is diffusion-like, with the magnitude of the apparent diffusion coefficient being 6 × 10 −12 cm 2 /s.

Duan, Jiaxin↗
DOE OSTI2022

Direct Observation of Modulated Radical Spin States in Metal–Organic Frameworks by Controlled Flexibility

Owing to their switchable spin states and dynamic electronic character, organic-based radical species have been invoked in phenomena unique to a variety of fields. When incorporated in solid state materials, generation of organic radicals proves challenging due to aggregation. Metal–organic frameworks (MOFs) are promising candidates for immobilization and stabilization of organic radicals because of the tunable spatial arrangement of organic linkers and metal nodes, which sequesters the reactive species. Herein, a flexible, redox-active tetracarboxylic acid linker bearing two imidazole units was chosen to construct a new Zr 6 -MOF, NU-910, with scu topology. By exploiting the structural flexibility of NU-910, we successfully modulate the dynamics between an isolated organic radical species and an organic radical π-dimer species in the MOF system. Single-crystal X-ray diffraction analysis reveals that through solvent exchange from N,N-diethylformamide to acetone, NU-910 undergoes a structural contraction with interlinker distances decreasing from 8.32 Å to 3.20 Å at 100 K. Organic radical species on the bridging linkers are generated via UV light irradiation. Direct observation of temperature-induced spin switches from an isolated radical species to a magnetically silent radical π-dimer in NU-910 after irradiation in the solid state was achieved via variable-temperature single-crystal X-ray diffraction and variable-temperature electron paramagnetic resonance spectroscopy. Ultraviolet–visible–near infrared spectroscopy and density functional theory calculations further substantiated the formation of a radical cation π-dimer upon irradiation. As a result, this work demonstrates the potential of using flexible MOFs as a platform to modulate radical spin states in the solid phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ethylene polymerization with a crystallographically well-defined metal–organic framework supported catalyst

The inherent crystallinity of metal–organic framework (MOF) catalysts offers the possibility to understand the structure of the active site at the molecular level. This property is often lacking in traditional amorphous supports. Cr-SIM-NU-1000, a MOF-supported Cr 3+ heterogeneous catalyst, is shown to be competent for ethylene polymerization after activation with AlEt 2 Cl (DEAC), producing crystalline linear polyethylene (PE). The polymer produced has a low polydispersity (D = 2.0), in marked contrast to the Phillips supported chromium catalyst, Cr@SiO 2 (D ~ 8–65). Cr-SIM-NU-1000 achieves a turnover frequency of 2.6 × 10 3 h –1 under 40 bar ethylene pressure at room temperature, with corresponding PE productivity of 1.3 × 10 5 g PE mol –1 Cr per h. Single crystal X-ray diffraction (SC-XRD) of the pre-catalyst was conducted by collecting a structure of alkyl aluminum (DEAC) co-catalyst treated Cr-SIM-NU-1000. This crystal structure provides insight into the interactions between DEAC co-catalyst and Cr active site, revealing a Cr–C bond after treatment with DEAC. Furthermore, DEAC is crystallographically resolved at the terminal oxy-ligands of the node and likely also exists within the window pores of the framework between nodes, based on electron density mapping. Cr-SIM-NU-1000 offers the opportunity to study a structurally well-defined olefin polymerization system, with atomically precise characterization of the pre-catalyst structure. Furthermore, this allows the proposal of a mechanism and feeds into future development of next-generation heterogeneous catalyst systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗