Engineering Papers⌕ Search

Engineering topics

Hung, Ching-Mao

Publications and source records attributed to Hung, Ching-Mao.

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Definition of Contravariant Velocity Components

This is an old issue in computational fluid dynamics (CFD). What is the so-called contravariant velocity or contravariant velocity component? In the article, we review the basics of tensor analysis and give the contravariant velocity component a rigorous explanation. For a given coordinate system, there exist two uniquely determined sets of base vector systems - one is the covariant and another is the contravariant base vector system. The two base vector systems are reciprocal. The so-called contravariant velocity component is really the contravariant component of a velocity vector for a time-independent coordinate system, or the contravariant component of a relative velocity between fluid and coordinates, for a time-dependent coordinate system. The contravariant velocity components are not physical quantities of the velocity vector. Their magnitudes, dimensions, and associated directions are controlled by their corresponding covariant base vectors. Several 2-D (two-dimensional) linear examples and 2-D mass-conservation equation are used to illustrate the details of expressing a vector with respect to the covariant and contravariant base vector systems, respectively.

Hung, Ching-Mao↗
NASA NTRS1993

Simulations Of Three-Dimensional Flow With Separation

Report discusses numerical solutions of Navier-Stokes equations for viscous supersonic flow over fin protruding from flat plate. Two types of configurations considered: one with wedge-shaped fin (sharp edge facing upstream), other with blunt (rectangular parallelepiped) fin. Only steady flows considered. Computations performed to study phenomena involved in separations of three-dimensional flows.

Hung, Ching-Mao↗
NASA NTRS1991

Computation of Navier-Stokes equations for three-dimensional flow separation

Supersonic flows over a sharp and a flat-faced blunt fin mounted on a flat plate are simulated numerically. Several basic issues involved in the resultant three-dimensional steady flow separation are studied. Using the same number of grid points, different grid spacings are employed to investigate the effects of a grid resolution on the origin of the line of separation. Various shock strengths are used to study the so-called separation and unseparated boundary layer and to establish the existence or absence of secondary separation. The length of separation ahead of the flat-faced blunt fin, bifurcation of a horseshoe vortex, and the accessibility of a closed-type separation are investigated. The usual interpretation of the flow field from previous studies and new interpretations arising from the present simulation are discussed.

Hung, Ching-Mao↗
NASA NTRS1991

Numerical study of juncture flows

The present paper describes a computational study of laminar/turbulent and subsonic/supersonic horseshoe vortex systems generated by a cylindrical protuberance mounted on a flat plate. Various vortex structures are predicted and discussed. Low-speed laminar juncture flows are computed to determine the Reynolds number effect with the same incoming boundary-layer thickness. For a low subsonic laminar flow, the number of vortex arrays increases with the Reynolds number, in agreement with both experimental and numerical observations. Qualitative comparisons are made along with the computations, experimental observations, and analytical work. For incompressible flow, the relationships among pressure extrema, vorticity, and singular points in flow structure are discussed. A parametric study of the effect of the free-stream Mach number on the flow structure for laminar flow is conducted. The juncture flow when the incoming flow is turbulent and supersonic is computed.

Chen, Chung-Lung↗
NASA NTRS1991

Computation of saddle point of attachment

Low-speed flows over a cylinder mounted on a flat plate are studied numerically in order to confirm the existence of a saddle point of attachment in the flow before an obstacle, to analyze the flow characteristics near the saddle point theoretically, and to address the significance of the saddle point of attachment to the construction of external flow structures, the interpretation of experimental surface oil-flow patterns, and the theoretical definition of three-dimensional flow separation. Two numerical codes, one for an incompressible flow and another for a compressible flow, are used for various Mach numbers, Reynolds numbers, grid sizes, and numbers of grid points. It is pointed out that the potential presence of a saddle point of attachment means that a line of 'oil accumulation' from both sides of a skin-friction line emanating outward from a saddle point can be either a line of separation or a line of attachment.

Hung, Ching-Mao↗
NASA NTRS1990

Simulation of glancing shock wave and boundary layer interaction

Shock waves generated by sharp fins, glancing across a laminar boundary layer growing over a flat plate, are simulated numerically. Several basic issues concerning the resultant three-dimensional flow separation are studied. Using the same number of grid points, different grid spacings are employed to investigate the effects of grid resolution on the origin of the line of separation. Various shock strengths (generated by different fin angles) are used to study the so-called separated and unseparated boundary layer and to establish the existence or absence of the secondary separation. The usual interpretations of the flow field from previous studies and new interpretations arising from the present simulation are discussed.

Hung, Ching-Mao↗
NASA NTRS1989

Computation of Navier-Stokes equations for three-dimensional flow separation

Supersonic flows over a sharp and a flat-faced blunt fin mounted on a flat plate are simulated numerically. Several basic issues involved in the resultant three-dimensional steady flow separation are studied. Using the same number of grid points, different grid spacings are employed to investigate the effects of a grid resolution on the origin of the line of separation. Various shock strengths are used to study the so-called separated and unseparated boundary layer and to establish the existence or absence of secondary separation. The length of separation ahead of the flat-faced blunt fin, bifurcation of a horseshoe vortex, and the accessibility of a closed-type separation are investigated. The usual interpretation of the flow field from previous studies and new interpretations arising from the present simulation are discussed.

Hung, Ching-Mao↗
NASA NTRS1989

Simulation of glancing shock wave and boundary layer interaction

Shock waves generated by sharp fins, glancing across a laminar boundary layer growing over a flat plate, are simulated numerically. Several basic issues concerning the resultant three-dimensional flow separation are studied. Using the same number of grid points, different grid spacings are employed to investigate the effects of grid resolution on the origin of the line of separation. Various shock strengths (generated by different fin angles) are used to study the so-called separated and unseparated boundary layer and to establish the existence or absence of the secondary separation. The usual interpretations of the flow field from previous studies and new interpretations arising from the present simulation are discussed.

Hung, Ching-Mao↗
NASA NTRS1988

Computation of hypersonic flow through a narrow expansion slot

The compressible Navier-Stokes equations are numerically solved for hypersonic flow over a three-dimensional ramp with a narrow expansion slot. In a two-dimensional test case, it is shown that a higher order scheme is needed to avoid too much numerical dissipation and hence too much total-pressure loss. The calculation demonstrates the role of viscosity in the expansion process of hypersonic flow through the narrow slot. Cases with various wall temperatures and slot widths are studied. Calculations show that wall cooling reduces the thickness of boundary layer, and hence increases the flow expansion substantially. In the lower portion of the slot, inviscidly, the flow is dominated by a highly expanded low density fluid, and viscously, by a viscous layer. As a direct consequence, as soon as the wedge angle is large enough, the mass flux through the slot is almost constant.

Hung, Ching-Mao↗
NASA NTRS1987

Extrapolation of velocity for inviscid solid boundary conditions

The present examination of an extrapolation of velocity along an arbitrary direction in the case of inviscid solid boundary conditions demonstrates the error associated with the arbitrary direction and establishes that the most appropriate procedure lies in the extrapolation of the velocity components that are tangential to the body surface. It is noted that, in a typical calculation, mesh lines generally cluster together and are therefore parallel or nearly parallel to the body surface.

Hung, Ching-Mao↗
NASA NTRS1986

Computation of separation ahead of blunt fin in supersonic turbulent flow

Separation ahead of a flat-face blunt fin in a supersonic turbulent boundary layer was studied numerically. The following observations and conclusions were made: (1) the length of separation increases to about 5.2 D, compared with about 2.0 to 2.5 D for the typical hemi-cylindrical results, and this numerical result confirms experimental observation; (2) even though there is a kink in pressure in the present case, there is no secondary separation under the main horseshoe vortices and there are three vortices, leading to the conclusion that the number of vortices is not always an even number; and (3) for the case investigated the separation point is connected to the inner (first) horseshoe vortex, rather than the outer (second) one. The four layers of fluid entrain in the three vortices, respectively.

Hung, Ching-Mao↗
NASA NTRS1985

Simulation of Blunt-Fin-Induced Shock-Wave and Turbulent Boundary-Layer Interaction

The Reynolds-averaged Navier-Stokes equations are solved numerically for supersonic flow over a blunt fin mounted on a flat plate. The fin shock causes the boundary layer to separate. which results in a complicated, three-dimensional shock-wave and boundary-layer interaction. The computed results are in good agreement with the mean static pressure measured on the fin and the flat plate. The main features, such as peak pressure on the fin leading edge and a double peak on the plate. are predicted well. The role of the horseshoe vortex is discussed. This vortex leads to the development of high-speed flow and, hence, low-pressure regions on the fin and the plate. Different thicknesses of the incoming boundary layer have been studied. Varying the thicknesses by an order of magnitude shows that the size of the horseshoe vortex and, therefore, the spatial extent of the interaction are dominated by inviscid flow and only weakly dependent on the Reynolds number. Colored graphics are used to show details of the interaction flow field.

Hung, Ching-Mao↗