Engineering Papers⌕ Search

Engineering topics

Huang, P. G.

Publications and source records attributed to Huang, P. G..

32 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Turbulence modeling for complex hypersonic flows

The paper presents results of calculations for a range of 2D turbulent hypersonic flows using two-equation models. The baseline models and the model corrections required for good hypersonic-flow predictions will be illustrated. Three experimental data sets were chosen for comparison. They are: (1) the hypersonic flare flows of Kussoy and Horstman, (2) a 2D hypersonic compression corner flow of Coleman and Stollery, and (3) the ogive-cylinder impinging shock-expansion flows of Kussoy and Horstman. Comparisons with the experimental data have shown that baseline models under-predict the extent of flow separation but over-predict the heat transfer rate near flow reattachment. Modifications to the models are described which remove the above-mentioned deficiencies. Although we have restricted the discussion only to the selected baseline models in this paper, the modifications proposed are universal and can in principle be transferred to any existing two-equation model formulation.

Huang, P. G.↗
NASA NTRS1993

Calculations of Supersonic and Hypersonic Flows using Compressible Wall Functions

The present paper presents a numerical procedure to calculate supersonic and hypersonic flows using the compressible law of the wall. The turbulence models under consideration include the Launder-Reece-Rodi-Gibson Reynolds-stress model and the k-epsilon model. The models coupled with the proposed wall function technique have been tested in both separated and unseparated flows. The flows include (1) an insulated flat plate flow over a range of Mach numbers, (2) a Mach 5 flat plate flow with cold wall conditions, (3) a two dimensional supersonic compression corner flow, (4) a hypersonic flow over an axisymmetric flare, and (5) a hypersonic flow over a 2-D compression corner. Results indicate that the wall function technique gives improved predictions of skin friction and heat transfer in separated flows compared with models using wall dampers. Predictions of the extent of separation are not improved over the wall damper models except with the Reynolds-stress model for the supersonic compression corner flow case.

Huang, P. G.↗
NASA NTRS1992

Assessment of closure coefficients for compressible-flow turbulence models

A critical assessment is made of the closure coefficients used for turbulence length scale in existing models of the transport equation, with reference to the extension of these models to compressible flow. It is shown that to satisfy the compressible 'law of the wall', the model coefficients must actually be functions of density gradients. The magnitude of the errors that result from neglecting this dependence on density varies with the variable used to specify the length scale. Among the models investigated, the k-omega model yields the best performance, although it is not completely free from errors associated with density terms. Models designed to reduce the density-gradient effect to an insignificant level are proposed.

Huang, P. G.↗
NASA NTRS1992

Hypersonic flows as related to the national aerospace plane

The study in the last 6 months has observed a clear evidence that the current two-equation models tend to under-predict flow separation and over-predict heat transfer rate near flow re-attachment regions. In hypersonic flow calculations, these model deficiencies appear to be even more pronounced. This is particularly true in the incapability of the model to predict the extent of the flow separation. Two major deficiencies of the current two-equation models in predicting complex hypersonic flows have been reported, i.e., under-prediction of flow separation and over-prediction of peak heat transfer rate. Two modifications to the k - epsilon model were reported and tested over a range of flows. Based on our limited study, the modified models have been found to give better agreements in both surface pressure and heat transfer predictions for several complex shock-wave boundary-layer interaction flows. However, in order to confirm our observation, more calculations will be performed in the future study covering a wider range of flows and conditions than reported here.

Kussoy, Marvin↗
NASA NTRS1992

Turbulence modeling for high speed flows

An investigation of turbulence models for high speed flows is presented. The flows consist of simple 2D flows over flat plates and complex shock-wave boundary-layer interaction flows over ramps and wedges. The flows are typical of those encountered by high speed vehicles such as the NASP. The turbulence models investigated include various two-equation models which, as a class, are considered to be well suited to the design of high speed vehicles. A description and discussion of the specific models is given and includes both baseline or uncorrected models, and model corrections which are needed to improve predictions of complex flows. It is found that most of the models studied are able to give good predictions of the flat plate flows, and some of the models are able to predict some of the complex flows, but none of them are able to accurately predict all of the complex flows. Recommendations for future model improvements are discussed.

Coakley, T. J.↗
NASA NTRS1992

An implicit Navier-Stokes code for turbulent flow modeling

This paper presents a numerical approach to calculating turbulent flows employing advanced turbulence models. The main features include a line-by-line Gauss-Seidel algorithm using Roe's approximate Riemann solver, TVD numerical schemes, implicit boundary conditions and a decoupled turbulence-model solver. Based on the problems tested so far, the method has consistently demonstrated its ability in offering accuracy, boundedness and a fast rate of convergence to steady-state solution.

Huang, P. G.↗
NASA NTRS1990

A numerical method for prediction of compressible turbulent flows with closure models

A new computer code to solve the time averaged Navier-Stokes equations is developed. Many of the state-of-the-art numerical techniques and algorithms have been tested and implemented in the program in order to achieve a better numerical accuracy and code efficiency. Various turbulence models are tested for a wide range of flows. The initial focus has been on two-equation eddy-viscosity models, which are the most advanced available in current compressible flow codes. The long term goal will be to test Reynolds-Stress models and to explore their performance in the high Mach number range. Although testing and improvement of turbulence models for supersonic and hypersonic flows is the primary objective of this research, part of the effort has been devoted to analyzing the vortex breakdown phenomena using new computer programs. Some preliminary results on the breakdown of a vortex flow in a tube are reported. Present calculations are restricted to two dimensional flow geometry.

Huang, P. G.↗
NASA NTRS1990

An assessment and application of turbulence models for hypersonic flows

The current approach to the Accurate Computation of Complex high-speed flows is to solve the Reynolds averaged Navier-Stokes equations using finite difference methods. An integral part of this approach consists of development and applications of mathematical turbulence models which are necessary in predicting the aerothermodynamic loads on the vehicle and the performance of the propulsion plant. Computations of several high speed turbulent flows using various turbulence models are described and the models are evaluated by comparing computations with the results of experimental measurements. The cases investigated include flows over insulated and cooled flat plates with Mach numbers ranging from 2 to 8 and wall temperature ratios ranging from 0.2 to 1.0. The turbulence models investigated include zero-equation, two-equation, and Reynolds-stress transport models.

Coakley, T. J.↗
NASA NTRS1989

Mesh refinement in a two-dimensional large eddy simulation of a forced shear layer

A series of large eddy simulations are made of a forced shear layer and compared with experimental data. Several mesh densities were examined to separate the effect of numerical inaccuracy from modeling deficiencies. The turbulence model that was used to represent small scale, 3-D motions correctly predicted some gross features of the flow field, but appears to be structurally incorrect. The main effect of mesh refinement was to act as a filter on the scale of vortices that developed from the inflow boundary conditions.

Claus, R. W.↗
NASA NTRS1989

Time-dependent calculation of a forced mixing layer using a k-epsilon turbulence model

A two-dimensional-dependent calculation of a forced turbulent mixing layer is reported. The approach employs a k-epsilon turbulence model to represent the effects of motions which are three dimensional or out of phase with the forcing cycle. Calculations that correspond to conditions of the measurements of Weisbrot (1984) and Weisbrot and Wygnanski (1988) indicate that the main features of the mixing layer development are captured by the computation. The effect of grid refinement on the computed result indicates the importance of adequate resolution of the near field in correctly reproducing the flow evolution. The inlet boundary condition, similarly, is shown to play a decisive role in determining subsequent development.

Macinnes, J. M.↗
NASA NTRS1988

Time-accurate simulations of a shear layer forced at a single frequency

Calculations are presented for the forced shear layer studied experimentally by Oster and Wygnanski, and Weisbrot. Two different computational approaches are examined: Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES). The DNS approach solves the full three dimensional Navier-Stokes equations for a temporally evolving mixing layer, while the LES approach solves the two dimensional Navier-Stokes equations with a subgrid scale turbulence model. While the comparison between these calculations and experimental data was hampered by a lack of information on the inflow boundary conditions, the calculations are shown to qualitatively agree with several aspects of the experiment. The sensitivity of these calculations to factors such as mesh refinement and Reynolds number is illustrated.

Claus, R. W.↗
NASA NTRS1988

Time-accurate simulations of a shear layer forced at a single frequency

This report presents calculations of the forced shear layer studied experimentally by Oster and Wygnanski (1982) and Weisbrot (1984). Two different computational approaches are examined: Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES).The DNS appraoch solves the full three-dimensional, Navier-Stokes equations for a temporally evolving mixing layer, while the LES approach (as used in this report) solves the two-dimensional, Navier-Stokes equations with a subgrid scale turbulence model. While the comparison between these calculations and experimental data was hampered by a lack of information on the inflow boundary conditions, the calculations are shown to qualitatively agree with several aspects of the experiment. The sensitivity of these calculations to factors such as mesh refinement and Reynolds number is illustrated.

Claus, R. W.↗