Engineering Papers⌕ Search

Engineering topics

Huang, Hui

Publications and source records attributed to Huang, Hui.

At least 55 records · Page 3

STRESS AND DISTORTION SIMULATION OF ADDITIVE MANUFACTURING PROCESS BY HIGH PERFORMANCE COMPUTING

Numerical simulation is an efficient way to better understand the thermal and mechanical evolution during additive manufacturing (AM) and to design and optimize the process. However, with today’s computational tools, pass-by-pass thermal-mechanical numerical simulation of the AM process is extremely time-consuming. In this study, a new finite element code recently developed in house at Oak Ridge National Lab was used for additive manufacturing simulation. Our new code effectively utilizes GPU based high-performance computers to allow for realistic simulation of the transient thermal and mechanical response of materials during additive manufacturing. A benchmark study on a cylinder model by powder bed selective laser melting was carried out and distortion profile was compared to the experimental measurements. The accuracy and efficiency of the code was also demonstrated by analyzing a wire and arc additive manufacturing (WAAM) model which consists of a base plate and four deposited layers.

Huang, Hui↗

Submicron silica as high−capacity lithium storage material with superior cycling performance

Highlights: • The electrochemical performance of SiO{sub 2} is strongly associated with ball milling. • Submicron silica show superior cycling performance for lithium storage. • Mechanism of electrochemical performance of SiO{sub 2} depended on milling was discussed. - Abstract: Submicron silica (SiO{sub 2}) is prepared via directly milling bulk SiO{sub 2}, which is the major constituent of the abundant sand on the earth. The electrochemical lithium storage performance of SiO{sub 2} is found to be strongly associated with the ball milling treatment. The reversible capacity of SiO{sub 2} gradually increases from 163 to 803 mAh g{sup −1} as the milling time is extended from 0 to 72 h. For the SiO{sub 2} milled for 24 h, it exhibits excellent cycling performance with a discharge capacity of 602 mAh g{sup −1} over 150 cycles, corresponding to the capacity retention of 99.8% relative to the 2nd cycle. The different particle sizes distribution and electrochemical activity of SiO{sub 2} are responsible for the effect of ball milling on its electrochemical lithium storage performance such as reversible capacity, cycling stability, electrode polarization and initial Coulombic efficiency.

36 MATERIALS SCIENCE↗

Efficient Simulation of Welding Distortion in Large Structures and Its Reduction by Jig Constraints

Two large construction machinery structures were welded separately with and without jig constraints. The welding distortion of the entire structure was measured by a 3D coordinate measuring system and simulated by elastic FEM using the inherent deformation method. To obtain an accurate inherent deformation, a thermal elastoplastic FE analysis of simple one-side fillet joints with and without jig constraints was performed. Efficient simulation of welding distortion in large structures was accomplished by applying inherent deformation in a localized region, and the effect of jig constraint on the reduction of welding distortion was clarified. The computation of inherent deformation, the weld zone definition and the conversion of inherent deformation into inherent strain were automated. Measured and computed welding distortions in large structures had a good correspondence with respect to both tendency and magnitude. Further investigation of jig configuration was performed for enhanced reduction of welding distortion. Alternative controlling techniques for common welded structures were also addressed.

36 MATERIALS SCIENCE↗

High performance computation of residual stress and distortion in laser welded 301L stainless sheets

Transient thermo-mechanical simulation of stainless plate laser welding process was performed by a highly efficient and accurate approach-hybrid iterative substructure and adaptive mesh method. Especially, residual stress prediction was enhanced by considering various heat effects in the numerical model. The influence of laser welding heat input on residual stress and welding distortion of stainless thin sheets were investigated by experiment and simulation. X-ray diffraction (XRD) and contour method were used to measure the surficial and internal residual stress respectively. Effect of strain hardening, annealing and melting on residual stress prediction was clarified through a parametric study. It was shown that these heat effects must be taken into account for accurate prediction of residual stresses in laser welded stainless sheets. Reasonable agreement among residual stresses by numerical method, XRD and contour method was obtained. Buckling type welding distortion was also well reproduced by the developed thermo-mechanical FEM.

36 MATERIALS SCIENCE↗

Hydrolytic cleavage of both CS 2 carbon–sulfur bonds by multinuclear Pd(II) complexes at room temperature

Developing homogeneous catalysts that convert CS 2 and COS pollutants into environmentally benign products is important for both fundamental catalytic research and applied environmental science. Here we report a series of air-stable dimeric Pd complexes that mediate the facile hydrolytic cleavage of both CS 2 carbon–sulfur bonds at 25 °C to produce CO 2 and trimeric Pd complexes. Oxidation of the trimeric complexes with HNO 3 regenerates the dimeric starting complexes with the release of SO 2 and NO 2 . Isotopic labelling confirms that the carbon and oxygen atoms of CO 2 originate from CS 2 and H 2 O, respectively, and reaction intermediates were observed by gas-phase and electrospray ionization mass spectrometry, as well as by Fourier transform infrared spectroscopy. We also propose a plausible mechanistic scenario based on the experimentally observed intermediates. Here, the mechanism involves intramolecular attack by a nucleophilic Pd–OH moiety on the carbon atom of coordinated µ-OCS 2 , which on deprotonation cleaves one C–S bond and simultaneously forms a C–O bond. Coupled C–S cleavage and CO 2 release to yield [(bpy) 3 Pd 3 ( µ3 -S) 2 ](NO 3 ) 2 (bpy, 2,2'-bipyridine) provides the thermodynamic driving force for the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polarization response of clathrate hydrates capsulated with guest molecules

Clathrate hydrates are characterized by their water cages encapsulating various guest atoms or molecules. The polarization effect of these guest-cage complexes was studied with combined density functional theory and finite-field calculations. An addition rule was noted for these systems whose total polarizability is approximately equal to the polarizability sum of the guest and the cage. However, their distributional polarizability computed with Hirshfeld partitioning scheme indicates that the guest–cage interaction has considerable influence on their polarization response. The polarization of encapsulated guest is reduced while the polarization of water cage is enhanced. The counteraction of these two opposite effects leads to the almost unchanged total polarizability. Further analysis reveals that the reduced polarizability of encapsulated guest results from the shielding effect of water cage against the external field and the enhanced polarizability of water cage from the enhanced bonding of hydrogen bonds among water molecules. Although the charge transfer through the hydrogen bonds is rather small in the water cage, the polarization response of clathrate hydrates is sensitive to the changes of hydrogen bonding strength. The guest encapsulation strengthens the hydrogen bonding network and leads to enhanced polarizability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Overexpressed KDM5B is associated with the progression of glioma and promotes glioma cell growth via downregulating p21

Highlights: • KDM5B is overexpressed in glioma samples. • KDM5B stimulated proliferation of glioma cells. • Inhibition of p21contributes to KDM5B-induced proliferation. - Abstract: Epigenetic alterations such as aberrant expression of histone-modifying enzymes have been implicated in tumorigenesis. Upregulation of lysine (K)-specific demethylase 5B (KDM5B) has been reported in a variety of malignant tumors. However, the impact of KDM5B in glioma remains unclear. The objective of this study was to investigate the expression and prognostic value of KDM5B in glioma. In clinical glioma samples, we found that KDM5B expression was significantly upregulated in cancer lesions compared with normal brain tissues. Kaplan–Meier analysis showed that patients with glioma and higher KDM5B expression tend to have shorter overall survival time. By silencing or overexpressing KDM5B in glioma cells, we found that KDM5B could promote cell growth both in vitro and in vivo. Moreover, we demonstrated that KDM5B promoted glioma proliferation partly via regulation of the expression of p21. Our study provided evidence that KDM5B functions as a novel tumor oncogene in glioma and may be a potential therapeutic target for glioma management.

60 APPLIED LIFE SCIENCES↗

Phonon-mediated squeezing of the cavity field off-resonantly coupled with a coherently driven quantum dot

We theoretically propose a scheme for the quadrature squeezing of the cavity field via dissipative processes. The effects of the electron-phonon interaction (EPI) on the squeezing are investigated, where the cavity is off-resonantly coupled with a coherently driven quantum dot (QD) which is allowed to interact with an acoustic-phonon reservoir. Under certain conditions, the participation of the phonon induced by both the EPI and the off-resonant coupling of the cavity with the QD enables some dissipative processes to occur resonantly in the dressed-state basis of the QD. The cavity-mode photons emitted or absorbed during the phonon-mediated dissipative processes are correlated, thus leading to the squeezing of the cavity field. A squeezed vacuum reservoir for the cavity field is built up due to the EPI plus the off-resonant coupling between the cavity and the QD. The numerical results obtained with an effective polaron master equation derived using second-order perturbation theory indicate that, in low temperature limit, the degree of squeezing is maximal but the increasing temperature of the phonon reservoir could hinder the squeezing and degrade the degree of the squeezing of the cavity field. In addition, the presence of the photonic crystal could enhance the quadrature squeezing of the cavity field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Au/SiO{sub x} composite thin film as catalyst for solvent-free hydrocarbon oxidation

Graphical abstract: Au/SiO{sub x} composite thin film possesses high catalytic activity and stability for selective oxidation of cis-cyclooctene. - Highlights: • Au/SiO{sub x} composite thin film was synthesized by a facile and efficient chemical approach. • The Au/SiO{sub x} composite thin film exhibits high catalytic ability for the selective oxidation. • The Au/SiO{sub x} composite thin film possesses high structural and catalytic stability. - Abstract: We report a facile and efficient chemical approach for the controllable preparation of Au/SiO{sub x} composite thin film using silicon quantum dots as SiO{sub x} sources. Au/SiO{sub x} composite thin film exhibits high catalytic activity (65.04% conversion based on cis-cyclooctene and 78.34% selectivity for 2-hydroxycyclooctanone) and stability for selective oxidation of cis-cyclooctene in the absence of solvent using TBHP as radical initiator and oxygen (in the air) as oxidant at 80 °C.

36 MATERIALS SCIENCE↗

Liquid-phase plasma synthesis of silicon quantum dots embedded in carbon matrix for lithium battery anodes

Graphical abstract: - Highlights: • Silicon quantum dots embedded in carbon matrix (SiQDs/C) were fabricated. • SiQDs/C exhibits excellent battery performance as anode materials with high specific capacity. • The good performance was attributed to the marriage of small sized SiQDs and carbon. - Abstract: Silicon quantum dots embedded in carbon matrix (SiQDs/C) nanocomposites were prepared by a novel liquid-phase plasma assisted synthetic process. The SiQDs/C nanocomposites were demonstrated to show high specific capacity, good cycling life and high coulmbic efficiency as anode materials for lithium-ion battery.

36 MATERIALS SCIENCE↗

Bisphenol A differentially activates protein kinase C isoforms in murine placental tissue

Bisphenol A is utilized to make polycarbonate plastics and is an environmental pollutant. Recent research has indicated that it is an endocrine disruptor and may interfere with reproductive processes. Our lab has previously shown that bisphenol A could regulate corticotrophin releasing hormone and aromatase in cultured placental cells. In the present study, the effect of bisphenol A on these two genes in the placenta was investigated in mice. Pregnant ICR mice were gavaged with bisphenol A at 2, 20 and 200 mg/kg body weight/day from E13 to E16 and were euthanized at E17. Compared to the control mice, increased plasma estrogen and corticotrophin releasing hormone were observed in bisphenol A-treated mice. Messenger RNA quantification indicated that placental crh but not cyp19 was induced in mice treated with bisphenol A. Tracking the related signaling pathway, we found that protein kinase C ζ/λ and δ were activated in the placentas of bisphenol A-treated mice. As the gene promoter of crh contains CRE and the half site of ERE, either phospho-PKC or estrogen could stimulate the gene transactivation. These results indicate that bisphenol A might increase plasma concentrations of estradiol, testosterone, corticotrophin releasing hormone and placental phospho-PKC ζ/λ and δ in mice. Ultimately, the incidence of premature birth in these mice could increase. - Highlights: • The pollutant bisphenol A differentially activated PKC isoforms in the placenta. • CRE-binding activity in the nuclear protein of placenta was increased. • Bisphenol A induces CRH mRNA expression in mice.

60 APPLIED LIFE SCIENCES↗

Specific interaction between hnRNP H and HPV16 L1 proteins: Implications for late gene auto-regulation enabling rapid viral capsid protein production

Highlights: ► The RNA-binding hnRNP H regulates late viral gene expression. ► hnRNP H activity was inhibited by a late viral protein. ► Specific interaction between HPV L1 and hnRNP H was demonstrated. ► Co-localization of HPV L1 and hnRNP H inside cells was observed. ► Viral capsid protein production, enabling rapid capsid assembly, was implicated. -- Abstract: Heterogeneous nuclear ribonucleoproteins (hnRNPs), including hnRNP H, are RNA-binding proteins that function as splicing factors and are involved in downstream gene regulation. hnRNP H, which binds to G triplet regions in RNA, has been shown to play an important role in regulating the staged expression of late proteins in viral systems. Here, we report that the specific association between hnRNP H and a late viral capsid protein, human papillomavirus (HPV) L1 protein, leads to the suppressed function of hnRNP H in the presence of the L1 protein. The direct interaction between the L1 protein and hnRNP H was demonstrated by complex formation in solution and intracellularly using a variety of biochemical and immunochemical methods, including peptide mapping, specific co-immunoprecipitation and confocal fluorescence microscopy. These results support a working hypothesis that a late viral protein HPV16 L1, which is down regulated by hnRNP H early in the viral life cycle may provide an auto-regulatory positive feedback loop that allows the rapid production of HPV capsid proteins through suppression of the function of hnRNP H at the late stage of the viral life cycle. In this positive feedback loop, the late viral gene products that were down regulated earlier themselves disable their suppressors, and this feedback mechanism could facilitate the rapid production of capsid proteins, allowing staged and efficient viral capsid assembly.

60 APPLIED LIFE SCIENCES↗

Carbon microspheres from ethanol at low temperature: Fabrication, characterization and their use as an electrocatalyst support for methanol oxidation

Highlights: ► Carbon microbeads were prepared by the carbonization of ethanol at low temperature. ► The low temperature carbonization of ethanol was catalyzed by iodine. ► Carbon microbeads can serve as ideal candidate for catalyst supports. -- Abstract: Carbon microspheres (CMSs) with a diameter range of 2–3 μm were prepared by the iodine-catalyzed carbonization of ethanol at low temperatures by solvothermal synthesis. The reaction time, concentrations of reactants, temperatures, different alcohols as carbon precursors and reaction environments were systematically altered to determine the optimal synthesis conditions. The size and shape were characterized by scanning and transmission electron microscopy and their structure was characterized by X-ray powder diffraction and Raman spectroscopy. Energy dispersive X-ray spectroscopy, Fourier transform infrared and X-ray photoelectron spectroscopy showed that abundant oxygen-containing functional groups remain on the surface of the carbon spheres. The formation mechanism involves iodine promotion of the oxidation of ethanol, which results in formation of the CMSs. The specific activity of the CMS-supported Pt catalyst is higher than that of a commercial Pt catalyst from E-TEK or the unsupported Pt catalyst.

36 MATERIALS SCIENCE↗

Highly ordered three-dimensional macroporous carbon spheres for determination of heavy metal ions

Highlights: Black-Right-Pointing-Pointer Highly ordered three dimensional macroporous carbon spheres (MPCSs) were prepared. Black-Right-Pointing-Pointer MPCS was covalently modified by cysteine (MPCS-CO-Cys). Black-Right-Pointing-Pointer MPCS-CO-Cys was first time used in electrochemical detection of heavy metal ions. Black-Right-Pointing-Pointer Heavy metal ions such as Pb{sup 2+} and Cd{sup 2+} can be simultaneously determined. -- Abstract: An effective voltammetric method for detection of trace heavy metal ions using chemically modified highly ordered three dimensional macroporous carbon spheres electrode surfaces is described. The highly ordered three dimensional macroporous carbon spheres were prepared by carbonization of glucose in silica crystal bead template, followed by removal of the template. The highly ordered three dimensional macroporous carbon spheres were covalently modified by cysteine, an amino acid with high affinities towards some heavy metals. The materials were characterized by physical adsorption of nitrogen, scanning electron microscopy, and transmission electron microscopy techniques. While the Fourier-transform infrared spectroscopy was used to characterize the functional groups on the surface of carbon spheres. High sensitivity was exhibited when this material was used in electrochemical detection (square wave anodic stripping voltammetry) of heavy metal ions due to the porous structure. And the potential application for simultaneous detection of heavy metal ions was also investigated.

36 MATERIALS SCIENCE↗