Engineering Papers⌕ Search

Engineering topics

Hu, Wei

Publications and source records attributed to Hu, Wei.

51 records · Page 3

Adaptively Compressed Exchange Operator for Large-Scale Hybrid Density Functional Calculations with Applications to the Adsorption of Water on Silicene

Density functional theory (DFT) calculations using hybrid exchange-correlation functionals have been shown to provide an accurate description of the electronic structures of nanosystems. However, such calculations are often limited to small system sizes due to the high computational cost associated with the construction and application of the Hartree-Fock (HF) exchange operator. Here, we demonstrate that the recently developed adaptively compressed exchange (ACE) operator formulation [J. Chem. Theory Comput. 2016, 12, 2242-2249] can enable hybrid functional DFT calculations for nanosystems with thousands of atoms. The cost of constructing the ACE operator is the same as that of applying the exchange operator to the occupied orbitals once, while the cost of applying the Hamiltonian operator with a hybrid functional (after construction of the ACE operator) is only marginally higher than that associated with applying a Hamiltonian constructed from local and semilocal exchange-correlation functionals. Therefore, this new development significantly lowers the computational barrier for using hybrid functionals in large-scale DFT calculations. We demonstrate that a parallel planewave implementation of this method can be used to compute the ground-state electronic structure of a 1000-atom bulk silicon system in less than 30 wall clock minutes and that this method scales beyond 8000 computational cores for a bulk silicon system containing about 4000 atoms. The efficiency of the present methodology in treating large systems enables us to investigate adsorption properties of water molecules on Ag-supported two-dimensional silicene. Our computational results show that water monomer, dimer, and trimer configurations exhibit distinct adsorption behaviors on silicene. In particular, the presence of additional water molecules in the dimer and trimer configurations induces a transition from physisorption to chemisorption, followed by dissociation on Ag-supported silicene. This is caused by the enhanced effect of hydrogen bonds on charge transfer and proton transfer processes. Lastly, such a hydrogen bond autocatalytic effect is expected to have broad applications for silicene as an efficient surface catalyst for oxygen reduction reactions and water dissociation.

36 MATERIALS SCIENCE↗

Two-dimensional van der Waals heterojunctions for functional materials and devices

Two-dimensional (2D) materials, such as graphene, phosphorene, graphitic carbon nitride (g-C3N4), graphitic zinc oxide (g-ZnO) and transition metal dichalcogenides (TMDs, e.g., MoS2), have already attracted extensive attention due to their outstanding properties and wide range of applications in electronic and optoelectronic devices. In particular, 2D van der Waals heterojunctions combining the electronic structures of such 2D materials have also been predicted theoretically and synthesized experimentally to expect more new properties (e.g., bandgap opening in graphene, semiconductor band alignment, charge transfer and new optical absorption) and potential applications (e.g., solar cells, field-effect transistors (FFTs), PN junctions, PN diodes and photodetectors) far beyond corresponding 2D materials. This review focuses on recent theoretical works about 2D van der Waals heterojunctions especially for functional materials and devices such as photovoltaic solar cells (phosphorene/MoS2 and edge-modified phosphorene nanoflake based heterojunctions), Schottky and Ohmic contacts (graphene/MoS2 based heterojunctions), PN junctions (graphene/g-ZnO based heterojunctions) and supercapacitors (graphene/h-BN based heterojunctions). These theoretical simulations and designs of 2D van der Waals heterojunctions provide a promising direction for high-performance electronic and optoelectronic devices in experiments.

Hu, Wei↗

Chebyshev polynomial filtered subspace iteration in the discontinuous Galerkin method for large-scale electronic structure calculations

The Discontinuous Galerkin (DG) electronic structure method employs an adaptive local basis (ALB) set to solve the Kohn-Sham equations of density functional theory in a discontinuous Galerkin framework. The adaptive local basis is generated on-the-fly to capture the local material physics and can systematically attain chemical accuracy with only a few tens of degrees of freedom per atom. A central issue for large-scale calculations, however, is the computation of the electron density (and subsequently, ground state properties) from the discretized Hamiltonian in an efficient and scalable manner. We show in this work how Chebyshev polynomial filtered subspace iteration (CheFSI) can be used to address this issue and push the envelope in large-scale materials simulations in a discontinuous Galerkin framework. We describe how the subspace filtering steps can be performed in an efficient and scalable manner using a two-dimensional parallelization scheme, thanks to the orthogonality of the DG basis set and block-sparse structure of the DG Hamiltonian matrix. The on-the-fly nature of the ALB functions requires additional care in carrying out the subspace iterations. We demonstrate the parallel scalability of the DG-CheFSI approach in calculations of large-scale twodimensional graphene sheets and bulk three-dimensional lithium-ion electrolyte systems. In conclusion, employing 55 296 computational cores, the time per self-consistent field iteration for a sample of the bulk 3D electrolyte containing 8586 atoms is 90 s, and the time for a graphene sheet containing 11 520 atoms is 75 s.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Closure of Fracture Due to Cover Stress Re-establishment After Coal Mining

In situ measurements of deformations, stresses, and closure of fractures, affecting water inflow following coal mining, are challenging due to the inaccessibility of fractured rock. Here, the authors studied the closure process of the fractured rock mass with the cover stress re-establishment based on a theoretical analysis and a scale model testing. A quantitative analysis is used to study the fracture distribution in the fractured zone. A function to describe a fracture aperture distribution in the fractured zone is proposed, which takes into account the curvature and thickness of the fractured rock. The theoretical analysis and a scale model testing both indicate that the cover stress re-establishment with mining distance increasing and the relationship between the fracture closure and cover stress re-establishment both satisfy a logarithmic function. The scale model test also shows the following features: (1) the fracture ratio (which is the fracture area divided by the total area of fracture and intact rock with a unit width in the vertical or horizontal direction) in the lower part of the fractured rock mass is greater than that in the upper part; (2) the initially fast decreased of fracture ratios is then followed by a slower decrease during the cover stress re-establishment process; (3) in the upper part of the rock mass, the vertical directional fractures with small apertures are being closed with cover stress re-establishment, which indicates an increase in the water resistance reducing the seepage from these parts of the fractured zone. This study improves the general understanding of the fracture closure process and cover stress re-establishment in the fractured rock mass after coal mining ceased, and provides a theoretical basis for water resource protection in case of underground coal mining.

58 GEOSCIENCES↗

Generation of arbitrary vector beams with liquid crystal polarization converters and vector-photoaligned q-plates

Arbitrary vector beams (VBs) are realized by the designed polarization converters and corresponding vector-photoaligned q-plates. The polarization converter is a specific twisted nematic cell with one substrate homogeneously aligned and the other space-variantly aligned. By combining a polarization-sensitive alignment agent with a dynamic micro-lithography system, various categories of liquid crystal polarization converters are demonstrated. Besides, traditional radially/azimuthally polarized light, high-order and multi-ringed VBs, and a VB array with different orders are generated. The obtained converters are further utilized as polarization masks to implement vector-photoaligning. The technique facilitates both the volume duplication of these converters and the generation of another promising optical element, the q-plate, which is suitable for the generation of VBs for coherent lasers. The combination of proposed polarization converters and correspondingly fabricated q-plates would drastically enhance the capability of polarization control and may bring more possibilities for the design of photonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adrenomedullin attenuates interleukin-1β-induced inflammation and apoptosis in rat Leydig cells via inhibition of NF-κB signaling pathway

The aim of this paper is to investigate the protective effects of adrenomedullin (ADM) on interleukin-1β (IL-1β)-induced inflammation and apoptosis in rat Leydig cells and its underlying molecular mechanisms. Leydig cells were isolated from adult Sprague–Dawley rats. The cell culture was established by adding ADM 2 h prior to 24 h treatment with IL-1β-induced cytotoxicity. We detected cell viability and concentrations of testosterone, reactive oxygen species (ROS), malondialdehyde (MDA), and reduced glutathione (GSH). Gene expression levels were measured for inducible nitric oxide synthase (iNOS) and cyclo-oxygenase-2 (COX-2). Concentrations were detected for nitric oxide (NO) and prostaglandin E2 (PGE2). Apoptosis was assessed using terminal deoxynucleotidyl transferase dUTP nick-end labeling (TUNEL). Levels of gene expression and protein were detected for Bcl-2, Bax, caspase-3, and poly adenosine diphosphate-ribose polymerase (PARP). Protein levels were measured for nuclear factor kappa B (NF-κB) p65 and IκBα. ADM reduced IL-1β-induced cytotoxicity. ADM pretreatment significantly increased testosterone concentrations and decreased ROS, MDA, and GSH concentrations. ADM pretreatment inhibited IL-1β-induced inflammation in Leydig cells by decreasing the gene expression levels of iNOS and COX-2, as well as the concentrations of NO and PGE2. ADM pretreatment further decreased the number of TUNEL-positive stained Leydig cells, as confirmed by the increase in gene expression and protein levels of Bcl-2 and the decrease of Bax, caspase-3, and PARP levels. Moreover, ADM pretreatment inhibited NF-κB p65 phosphorylation and IκBα phosphorylation and degradation. ADM has potential anti-inflammatory and anti-apoptotic properties in IL-1β-induced rat Leydig cells, which might be related to NF-κB signaling pathway. - Highlights: • ADM attenuates IL-1β-induced oxidative stress in rat Leydig cells. • ADM attenuates IL-1β-induced uncontrolled inflammation in rat Leydig cells. • ADM inhibits IL-1β-induced apoptosis in rat Leydig cells. • ADM effects on rat Leydig cells via inhibition of NF-κB signaling pathway.

60 APPLIED LIFE SCIENCES↗

DGDFT: A massively parallel method for large scale density functional theory calculations

We describe a massively parallel implementation of the recently developed discontinuous Galerkin density functional theory (DGDFT) method, for efficient large-scale Kohn-Sham DFT based electronic structure calculations. The DGDFT method uses adaptive local basis (ALB) functions generated on-the-fly during the self-consistent field iteration to represent the solution to the Kohn-Sham equations. The use of the ALB set provides a systematic way to improve the accuracy of the approximation. By using the pole expansion and selected inversion technique to compute electron density, energy, and atomic forces, we can make the computational complexity of DGDFT scale at most quadratically with respect to the number of electrons for both insulating and metallic systems. We show that for the two-dimensional (2D) phosphorene systems studied here, using 37 basis functions per atom allows us to reach an accuracy level of 1.3 × 10{sup −4} Hartree/atom in terms of the error of energy and 6.2 × 10{sup −4} Hartree/bohr in terms of the error of atomic force, respectively. DGDFT can achieve 80% parallel efficiency on 128,000 high performance computing cores when it is used to study the electronic structure of 2D phosphorene systems with 3500-14 000 atoms. This high parallel efficiency results from a two-level parallelization scheme that we will describe in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A digital CDS technique and its performance testing

Readout noise is a critical parameter for characterizing the performance of charge-coupled devices (CCDs), which can be greatly reduced by the correlated double sampling (CDS) circuit. However, a conventional CDS circuit inevitably introduces new noise since it consists of several active analog components such as operational amplifiers. This article proposes a digital CDS circuit technique, which transforms the pre-amplified CCD signal into a train of digital presentations by a high-speed data acquisition card directly without the noisy CDS circuit, then implements the digital CDS algorithm through a numerical method. A readout noise of 3.3 e - and an energy resolution of 121 eV@5.9 keV can be achieved via the digital CDS technique.

42 ENGINEERING↗

Maximizing semi-active vibration isolation utilizing a magnetorheological damper with an inner bypass configuration

A single-degree-of-freedom (SDOF) semi-active vibration control system based on a magnetorheological (MR) damper with an inner bypass is investigated in this paper. The MR damper employing a pair of concentric tubes, between which the key structure, i.e., the inner bypass, is formed and MR fluids are energized, is designed to provide large dynamic range (i.e., ratio of field-on damping force to field-off damping force) and damping force range. The damping force performance of the MR damper is modeled using phenomenological model and verified by the experimental tests. In order to assess its feasibility and capability in vibration control systems, the mathematical model of a SDOF semi-active vibration control system based on the MR damper and skyhook control strategy is established. Using an MTS 244 hydraulic vibration exciter system and a dSPACE DS1103 real-time simulation system, experimental study for the SDOF semi-active vibration control system is also conducted. Simulation results are compared to experimental measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure and aromaticity of large-scale hexagonal graphene nanoflakes

With the help of the recently developed SIESTA-pole (Spanish Initiative for Electronic Simulations with Thousands of Atoms) - PEXSI (pole expansion and selected inversion) method [L. Lin, A. García, G. Huhs, and C. Yang, J. Phys.: Condens. Matter 26, 305503 (2014)], we perform Kohn-Sham density functional theory calculations to study the stability and electronic structure of hydrogen passivated hexagonal graphene nanoflakes (GNFs) with up to 11 700 atoms. We find the electronic properties of GNFs, including their cohesive energy, edge formation energy, highest occupied molecular orbital-lowest unoccupied molecular orbital energy gap, edge states, and aromaticity, depend sensitively on the type of edges (armchair graphene nanoflakes (ACGNFs) and zigzag graphene nanoflakes (ZZGNFs)), size and the number of electrons. We observe that, due to the edge-induced strain effect in ACGNFs, large-scale ACGNFs’ edge formation energy decreases as their size increases. This trend does not hold for ZZGNFs due to the presence of many edge states in ZZGNFs. We find that the energy gaps E{sub g} of GNFs all decay with respect to 1/L, where L is the size of the GNF, in a linear fashion. But as their size increases, ZZGNFs exhibit more localized edge states. We believe the presence of these states makes their gap decrease more rapidly. In particular, when L is larger than 6.40 nm, we find that ZZGNFs exhibit metallic characteristics. Furthermore, we find that the aromatic structures of GNFs appear to depend only on whether the system has 4N or 4N + 2 electrons, where N is an integer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uniform bipolar resistive switching properties with self-compliance effect of Pt/TiO{sub 2}/p-Si devices

We report uniform bipolar resistive switching characteristic with self-compliance effect of Pt/TiO{sub 2}/p-Si devices in which TiO{sub 2} thin films were prepared directly on p-Si substrates by chemical solution deposition method. The resistive switching parameters of the Pt/TiO{sub 2}/p-Si cell obtained, such as distribution of threshold voltages, retention time, as well as resistance variation of high resistance state (HRS) and low resistance state (LRS), were investigated, and the conduction mechanisms of HRS and LRS were analyzed. The conductive mechanism at LRS and low voltage region of HRS was dominated by Ohmic law. At the high voltage region of HRS, the conductive mechanism followed the space charge limited current theory. The resistive switching phenomenon can be explained by electron trapping and de-trapping process, in which the defects (most probably oxygen vacancies) act as electron traps. Our study suggests that using p-type silicon as bottom electrode can provide a simple method for fabricating a resistive random access memory with self-compliance function. In addition, the Pt/TiO{sub 2}/p-Si configuration is compatible with complementary metal oxide semiconductor process.

36 MATERIALS SCIENCE↗

A planning study of simultaneous integrated boost with forward IMRT for multiple brain metastases

The objective of this study was to evaluate the dose conformity and feasibility of whole-brain radiotherapy with a simultaneous integrated boost by forward intensity-modulated radiation therapy in patients with 1 to 3 brain metastases. Forward intensity-modulated radiation therapy plans were generated for 10 patients with 1 to 3 brain metastases on Pinnacle 6.2 Treatment Planning System. The prescribed dose was 30 Gy to the whole brain (planning target volume [PTV]{sub wbrt}) and 40 Gy to individual brain metastases (PTV{sub boost}) simultaneously, and both doses were given in 10 fractions. The maximum diameters of individual brain metastases ranged from 1.6 to 6 cm, and the summated PTVs per patient ranged from 1.62 to 69.81 cm{sup 3}. Conformity and feasibility were evaluated regarding conformation number and treatment delivery time. One hundred percent volume of the PTV{sub boost} received at least 95% of the prescribed dose in all cases. The maximum doses were less than 110% of the prescribed dose to the PTV{sub boost}, and all of the hot spots were within the PTV{sub boost}. The volume of the PTV{sub wbrt} that received at least 95% of the prescribed dose ranged from 99.2% to 100%. The mean values of conformation number were 0.682. The mean treatment delivery time was 2.79 minutes. Ten beams were used on an average in these plans. Whole-brain radiotherapy with a simultaneous integrated boost by forward intensity-modulated radiation therapy in 1 to 3 brain metastases is feasible, and treatment delivery time is short.

61 RADIATION PROTECTION AND DOSIMETRY↗

Enhanced photocatalytic performance of Ga{sup 3+}-doped ZnO

Graphical abstract: In general, the strong SPS response corresponds to the high separation rate of photoinduced charge carriers on the basis of the SPS principle. The photovoltage of Ga{sup 3+}-doped ZnO is higher than that of ZnO, thus it can be confirmed that the Ga{sup 3+}-doped ZnO has a higher charge separation rate than the ZnO sample. Among these samples, 1%Ga has highest charge separation rate. Display Omitted Highlights: ► Ga{sup 3+} has been employed to dope ZnO photocatalyst. ► Ga{sup 3+} increases the BET surface area and changes the morphology of ZnO. ► The photoinduced charge separation rate has been enhanced. ► The photocatalytic activity has been greatly promoted. -- Abstract: ZnO and Ga{sup 3+}-doped ZnO with different molar ratio of Ga/Zn (1%, 2% and 3%) were prepared by a parallel flow precipitation method. The photocatalysts prepared were characterized by BET surface area, X-ray diffraction (XRD), UV/vis diffuse reflectance spectroscopy (DRS), scanning electron microscope (SEM) and surface photovoltage spectroscopy (SPS), respectively. The results show that doping Ga{sup 3+} into ZnO increases the BET surface area. The XRD spectra of the photocatalysts calcined at 573 K show only the characteristic peaks of wurtzite-type. Ga{sup 3+}-doped ZnO absorbs much more light than ZnO in the visible light region. Doping Ga{sup 3+} into ZnO greatly changes the morphology of ZnO and enhances the photoinduced charge separation rate. The photocatalytic activity of ZnO and Ga{sup 3+}-doped ZnO for decolorization of methyl orange (MO) solution was evaluated, of all the photocatalysts prepared, the Ga{sup 3+}-doped ZnO with 1% possesses the best photocatalytic activity and the possible reason was discussed.

36 MATERIALS SCIENCE↗

A sulfonated poly (aryl ether ether ketone ketone) isomer: synthesis and DMFC performance

A sulfonated poly(aryl ether ether ketone ketone) (PEEKK) having a well-defined rigid homopolymer-like chemical structure was synthesized from a readily-prepared PEEKK post-sulfonation with concentrated sulfuric acid at room temperature within several hours. The polymer electrolyte membrane (PEM) cast from the resulting polymer exhibited an excellent combination of thermal resistance, oxidative and dimensional stability, low methanol fuel permeability and high proton conductivity. Furthermore, membrane electrode assemblies (MEAs) were successfully fabricated and good direct methanol fuel cell (DMFC) performance was observed. At 2 M MeOH feed, the current density at 0.5 V reached 165 mA/cm, which outperformed our reported analogues and eveluated Nafion membranes.

54 ENVIRONMENTAL SCIENCES↗