Engineering topics

Hu, Mingqiu

Publications and source records attributed to Hu, Mingqiu.

12 records

DOE OSTI2025

Bottlebrush Block Copolymer Thin Films

The self-assembly of block copolymers (BCPs) in thin films is governed by interfacial interactions (enthalpy) between the blocks and interfaces (at both the substrate and the surface). Advantage can also be taken of entropy to control the polymer orientation. Here, we synthesized a series of bottlebrush block copolymers (BBCPs), with deuterated polystyrene (DPS) as the core block and poly(solketal acrylate) (PSA) as the corona block, where the backbone length (N BB) and grafting densities (GDs) were varied. The hydrophobic PSA block was converted to a hydrophilic poly(glyceryl acrylate) (PGA) block by solid-state hydrolysis, bringing the BBCP from a disordered state into an ordered state with a lamellar microdomain morphology. The orientation of the morphology as a function of distance from the interfaces was systematically investigated by atomic force microscopy (AFM), interference microscopy, grazing-incidence small-angle X-ray scattering (GISAXS), and grazing-incidence small angle neutron scattering (GISANS). For N BB = 1 (diblock BCP), a mixed lamellar orientation was found. For N BB = 5 (star-like BBCP), a vertical orientation of the lamellar microdomains was found dominantly at the interfaces that propagated into the bulk of the film due to the entropic penalty associated with constraints on the junction points. Increasing the N BB to 50 (rod-like BBCP) and 100 (worm-like BBCP) yielded a random orientation, as the side chains became overcrowded when aligned in the same direction. By reducing the grafting density (GD) of a N BB = 50 BBCP from 100% to 75% and 50% by the incorporation of spacers into the backbone, the steric hindrance of side chains is reduced markedly, facilitating a vertical orientation of the lamellar microdomains. However, the vertical orientation becomes more random within the bulk of the thin film for different BBCP architectures. By modifying the substrate with a layer of PS, the preferential interactions between the core block of the BBCP and the interfaces induce a reconfiguration of the BBCP, drawing the core block out to contact substrate directly driven by enthalpy. Under these conditions, N BB = 5 showed a predominantly parallel orientation of the lamellar microdomains with the corona block minimizing contact with the substrate. Higher N BB values of 50 and 100 showed a more random orientation of the lamellar microdomains at different depths on the PS-modified substrate. Overall, thin-film morphology was regulated by tuning the configuration of the BBCP, varying the entropic contribution to the microdomain orientation.

Chen, Zhan↗

DOE OSTI2025

Backbone Stitching in Bottlebrush Copolymer Mesodomains and the Impact of Side Chain Crystallization

We synthesized bottlebrush statistical copolymers (BSCPs) having poly(ethylene oxide) (PEO) and poly(dimethylsiloxane) (PDMS) side chains attached to a polynorbornene backbone. Small-angle X-ray scattering analysis showed that for densely grafted BSCPs, the scattering length density gradually transitions between the PEO and PDMS domains. For loosely grafted BSCPs, the polymer backbone formed a distinct mesodomain, with a lower electron and mass density than both the PEO and PDMS domains. The bottlebrush backbone essentially “stitches” the PEO and PDMS side chains, looping back and forth from the PEO to PDMS domains with the backbone segments oriented normal to the domain interfaces. Self-consistent field theory (SCFT) calculations validated the stitching of the backbone driven by the microphase separation of PEO and PDMS, along with a strong segmental order of the side chains in the melt. The reduced birefringence upon PEO crystallization suggests the disruption of the strong segmental order by the crystallization. Both the static intrinsic and the form birefringences of the BSCPs decreased upon PEO crystallization. Solid-state NMR confirmed the rigidity of PEO crystallites and the bottlebrush backbone. Self-assembly of BSCPs containing polyhedral oligomeric silsesquioxane (POSS) pendent groups was also evaluated by X-ray scattering, showing the formation of lamellar microdomains that inhibited POSS crystallization.

Hu, Mingqiu↗

DOE OSTI2024

Crystallization of Bottlebrush Statistical Copolymers of Polystyrene and Poly(ethylene oxide)

Here, bottlebrush statistical copolymers (BSCPs) with poly(ethylene oxide) (PEO) and polystyrene (PS) side chains grafted to a polynorbornene (PNB) backbone were synthesized by ring-opening metathesis polymerization (ROMP). The impact of the glassy PS side chains on the crystallization of the PEO side chains as a function of the backbone length, grafting densities, and fraction of the PS and PEO side chains is described. The bottlebrush architecture, where the side chains are anchored to the backbone, inherently constrains the mobility of PEO. Compared with the bulk crystallization temperature of PEO, the higher glass transition temperature of PS places further constraints on PEO crystallization. The limited mobility of PEO leads to cold crystallization behavior during heating. Reduced grafting densities, in turn, reduce side-chain crowding, leading to less extended pendant structures. The degree of crystallinity of PEO was found to decrease at lower grafting densities to a point where crystallization was not observed. The average distance between bottlebrush backbones increased linearly with the backbone length, suggesting that the backbone forms a distinct mesodomain. For BSCPs with asymmetric volume fractions of PS and PEO side chains, the degree of crystallinity of PEO increases with a change from cold crystallization to normal nucleation and growth during cooling, as a result of reduced constraints on PEO mobility by the glassy PS side chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Bottlebrush Block Copolymers at the Interface of Immiscible Liquids: Adsorption and Lateral Packing

Amphiphilic bottlebrush block copolymers (BBCPs), having a hydrophilic bottlebrush polymer (BP) linked covalently to a hydrophobic BP, were found to segregate to liquid-liquid interfaces to minimize the free energy of the system. The key parameter influencing the outcome of the experiments is the ratio between the degree of polymerization of the backbone (NBB) and that of the side-chain brushes (NSC). Specifically, a spherical, star-like configuration results when NBB < NSC, while a cylindrical, bottlebrush-like shape is preferred when NBB > NSC. Dynamic interfacial tension (γ) and fluorescence recovery after photobleaching (FRAP) measurements show that the BBCP configuration influences the areal density and in-plane diffusion at the fluid interface. The characteristic relaxation times associated with BBCP adsorption (τA) and reorganization (τR) were determined by fitting time-dependent interfacial tension measurements to a sum of two exponential relaxation functions. Both τA and τR initially increased with NBB up to 92 repeat units, due to the larger hydrodynamic radius in solution and slower in-plane diffusivity, attributed to a shorter cross-sectional diameter of the side-chains near the block junction. This trend reversed at NBB = 190, with shorter τA and τR attributed to increased segregation strength and exposure of the bare water/toluene interface due to tilting and/or wiggling of the backbone chains, respectively. The adsorption energy barrier decreased with higher NBB, due to a reduced BBCP packing density at the fluid interface. In conclusion, this study provides fundamental insights into macromolecular assembly at fluid interfaces, as it pertains to unique bottlebrush block architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Conjugated Zwitterionic Oligomers as Ligands on Perovskite Nanocrystals: Hybrid Structures with Tunable Interparticle Spacing

Conventional ligands for CsPbBr 3 perovskite nanocrystals (NCs), composed of polar, coordinating head groups (e.g., ammonium or zwitterionic) and aliphatic tails, are instrumental in stabilizing the NCs against sintering and aggregation. Nonetheless, the aliphatic (insulating) nature of these ligands represents drawbacks with respect to objectives in optoelectronics, and yet removing these ligands typically leads to a loss of colloidal stability. Here, in this paper, we describe the preparation of CsPbBr 3 NCs in the presence of discrete conjugated oligomers that were prepared by an iterative synthetic approach and capped at their chain ends with sulfobetaine zwitterions for perovskite coordination. Notably, these zwitterionic oligofluorenes are compatible with the hot injection and ligand exchange conditions used to prepare CsPbBr 3 NCs, yielding stable NC dispersions with high photoluminescence quantum yields (PLQY, >90%) and spectral features representative of both the perovskite core and conjugated ligand shell. Controlling the chain length of these capping ligands effectively regulated inter-NC spacing and packing geometry when cast into solid films, with evidence derived from both transmission electron microscopy (TEM) and grazing incidence X-ray scattering measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Hydrolysis-Induced Morphology Evolution of Linear and Bottlebrush Block Copolymers in Thin Films with Acid Vapor or Photoacid Generators

The self-assembly of high-χ low-N block copolymers (BCPs) can give patterns with sub-10 nm full pitch, serving as a promising alternative to photolithographic methods. Here, in this work, we synthesized poly(solketal methacrylate)-block-polystyrene copolymers, PSM-b-PS, with various volume ratios of the two blocks. After hydrolysis of the PSM block into poly(glycerol monomethacrylate), PGM, the BCPs had both lamellar and cylindrical microdomain morphologies in the bulk phase and in thin films. In addition to our previously developed solid-state hydrolysis strategy involving trifluoroacetic acid vapor, we developed a new photoinduced solid-state hydrolysis using photoacid generators, PAGs, embedded within the polymer films. After exposure to UV followed by a postexposure baking or solvent vapor annealing, the BCPs transitioned from the disordered, phase-mixed state into laterally ordered cylindrical patterns. In comparison to linear BCPs that rely on a random copolymer layer to modify interfacial interactions with the substrate to promote an orientation of the microdomains normal to the interface, we found that the microdomains in bottlebrush multiblock copolymers oriented normal to the interface absent substrate modification due to the chain architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Janus bottlebrush compatibilizers

Bottlebrush random copolymers (BRCPs), consisting of a random distribution of two homopolymer chains along a backbone, can segregate to the interface between two immiscible homopolymers. BRCPs undergo a reconfiguration, where each block segregates to one of the homopolymer phases, adopting a Janus-type structure, reducing the interfacial tension and promoting adhesion between the two homopolymers, thereby serving as a Janus bottlebrush copolymer (JBCP) compatibilizer. Here, we synthesized a series of JBCPs by copolymerizing deuterated or hydrogenated polystyrene (DPS/PS) and poly(tert-butyl acrylate) (PtBA) macromonomers using ruthenium benzylidene-initiated ring-opening metathesis polymerization (ROMP). Subsequent acid-catalyzed hydrolysis converted the PtBA brushes to poly(acrylic acid) (PAA). The JBCPs were then placed at the interface between DPS/PS homopolymers and poly(2-vinyl pyridine) (P2VP) homopolymers, where the degree of polymerization of the backbone (N BB ) and the grafting density (GD) of the JBCPs were varied. Neutron reflectivity (NR) was used to determine the interfacial width and segmental density distributions (including PS homopolymer, PS block, PAA block and P2VP homopolymer) across the polymer-polymer interface. Our findings indicate that the star-like JBCP with N BB = 6 produces the largest interfacial broadening. Increasing N BB to 100 (rod-like shape) and 250 (worm-like shape) reduced the interfacial broadening due to a decrease in the interactions between blocks and homopolymers by stretching of blocks. Decreasing the GD from 100% to 80% at N BB = 100 caused an increase the interfacial width, yet further decreasing the GD to 50% and 20% reduced the interfacial width, as 80% of GD may efficiently increase the flexibility of blocks and promote interactions between homopolymers, while maintaining relatively high number of blocks attached to one molecule. The interfacial conformation of JBCPs was further translated into compatibilization efficiency. Thin film morphology studies showed that only the lower N BB values (N BB = 6 and N BB = 24) and the 80% GD of N BB = 100 had bicontinuous morphologies, due to a sufficient binding energy that arrested phase separation, supported by mechanical testing using asymmetric double cantilever beam (ADCB) tests. These provide fundamental insights into the assembly behavior of JBCPs compatibilizers at homopolymer interfaces, opening strategies for the design of new BCP compatibilizers.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Phase Behavior of Charged Star Block Copolymers at Fluids Interface

The phase behavior of block copolymers (BCPs) at the water-oil interface is influenced by the segmental interaction parameter (χ) and chain architecture. We synthesized a series of star block copolymers (s-BCPs) having polystyrene (PS) as core and poly(2-vinylpyridine) (P2VP) as corona. The interaction parameters of block-block (χ PS-P2VP ) and block-solvent (χ P2VP-solvent ) were varied by adjusting the pH of the aqueous solution. Lowering pH increased the fraction of quaternized-P2VP (Q-P2VP) with enhanced hydrophilicity. By transferring the equilibrated interfacial assemblies, morphologies ranging from bicontinuous films at pH of 7 and 3.1 to nanoporous and nanotubular structure at pH of 0.65 were observed. The nanoporous films formed hexagonally packed pores in s-BCP matrix, while nanotubes comprised Q-P2VP as corona and PS as core. Control over pore size, d-spacing between pores, and nanotube diameters was achieved by varying polymer concentration, molecular weight, volume fraction and arm number of s-BCPs. Large-scale nanoporous films were obtained by freeze-drying emulsions. Remarkably, the morphologies of linear BCPs were inverted, forming hexagonal-packed rigid spherical micelles with Q-P2VP as core and PS as corona in multilayer. Here, this work provides insights of phase behaviors of BCP at fluids interface and offer a facile approach to prepare nanoporous film with well-controlled pore structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Star Block Copolymers at Homopolymer Interfaces: Conformation and Compatibilization

Star block copolymers (s-BCPs), comprised of multiple linear diblock copolymers joined at a central point, are shown to segregate to the interface between two immiscible homopolymers that are identical to the blocks of the s-BCPs. The s-BCPs undergo a configurational transition at the interface, with different blocks of copolymers being embedded in their respective homopolymers, thereby bridging the interface and promoting adhesion. A series of 4-arm s-BCPs were synthesized with hydrogenated or deuterated polystyrene (PS/dPS) as the core block and poly(2-vinylpyridine) (P2VP) as the corona block, which was directly placed at the interface between the two homopolymers. Neutron reflectivity (NR) was used to determine the concentration profiles of the PS homopolymer, s-BCP core blocks, and P2VP total segments under equilibrium. The investigation varies the molecular weight (MW) and the total number of s-BCPs at the interface. Self-consistent-field theory (SCFT) was also employed to calculate the concentration profiles of the components at the interface, which were in excellent agreement with experimental results. The NR showed that the interfacial width between the homopolymers increased with the increasing number of s-BCPs at the interface up to a saturation limit. Beyond this limit, additional s-BCPs were released into the corona-miscible phase as unimolecular micelles. For a comparable interlayer thickness of s-BCPs at the interface, lower MW s-BCPs generated a broader interface. SCFT analysis suggested that, at the same packing density, the arms of the low MW s-BCPs align more parallel to the interface, while the arms of high MW s-BCPs adopt a more normal orientation, like their linear BCP counterparts. Furthermore, it was also observed that the core blocks, constrained by the junction points, were oriented more parallel and closer to the interface than the corona blocks. The phase behavior of the polymer blends revealed that s-BCP additives can efficiently reduce the domain size, with the low MW yielding smaller domain sizes due to the greater reduction in the interfacial energy and the high MW arresting phase separation due to their higher binding energy and a jamming of the interfacial assemblies. Asymmetric double cantilever beam (ADCB) tests demonstrated that s-BCPs promoted adhesion more efficiently than their linear BCP counterparts due to stronger binding energy per molecule, suggesting a more efficient compatibilizer for polymer upcycling. In conclusion, the results from these studies provide fundamental insights into the assembly of s-BCPs at homopolymer interfaces, the reduction of domain size, and promotion of adhesion, providing a strategy for the use of s-BCPs as stealth surfactants and universal compatibilizers.

interface↗

DOE OSTI2023

Photo-actuators via epitaxial growth of microcrystal arrays in polymer membranes

Photomechanical crystals composed of three-dimensionally ordered and densely packed photochromes hold promise for high-performance photochemical actuators. However, bulk crystals with high structural ordering are severely limited in their flexibility, resulting in poor processibility and a tendency to fragment upon light exposure, while previous nano- or microcrystalline composites have lacked global alignment. Here we demonstrate a photon-fuelled macroscopic actuator consisting of diarylethene microcrystals in a polyethylene terephthalate host matrix. These microcrystals survive large deformations and show a high degree of three-dimensional ordering dictated by the anisotropic polyethylene terephthalate, which critically also has a similar stiffness. Overall, these ordered and compliant composites exhibit rapid response times, sustain a performance of over at least hundreds of cycles and generate work densities exceeding those of single crystals. In conclusion, our composites represent the state-of-the-art for photochemical actuators and enable properties unattainable by single crystals, such as controllable, reversible and abrupt jumping (photosalient behaviour).

36 MATERIALS SCIENCE↗

DOE OSTI2023

Using Grazing-Incidence Small-Angle Neutron Scattering to Study the Orientation of Block Copolymer Morphologies in Thin Films

Here, we used grazing-incidence small-angle neutron scattering (GISANS) to probe the depth-dependent orientation of self-assembled morphologies of block copolymers. A hydrophobic–hydrophobic block copolymer, poly(solketal methacrylate)-block-polystyrene (PSM-b-PS), was synthesized and spin-coated into films tens of nanometers in thickness where the polymers adopted a disordered state. PSM-b-PS was then hydrolyzed by exposing the polymer thin film to trifluoroacetic acid vapor or embedding a photoacid generator in the film during spin coating, followed by exposure to UV light. The hydrolysis converted the block copolymer into a hydrophilic–hydrophobic block copolymer, poly(glycerol monomethacrylate)-block-polystyrene (PGM-b-PS), significantly increasing the segmental interaction parameter (χ) and causing microphase separation of the copolymers. GISANS was used to study the depth-dependent structure of the films and revealed that the orientation of the microphase-separated structure differed at the polymer–air and polymer–substrate interfaces. In the regions where the lamellae were parallel to the interfaces, the orientation propagated into the film from the interfaces. However, in the areas where the lamellae were perpendicular to the interfaces, the orientation did not persist with increasing distance from the interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Polymers with advanced architectures as emulsifiers for multi-functional emulsions

Emulsions have wide applications in the food, cosmetics, and pharmaceutical industries. Emulsions stabilized with polymers having different architectures, such as linear diblock and triblock copolymers, branched polymers, star polymers, graft polymers, and densely grafted bottlebrush polymers, have been used for encapsulation, delivery, and as templates for polymerization reactions. Furthermore, stimuli-responsive polymers have been used for on-demand demulsification and emulsion engineering. In this review, we highlight the developments in the past decade that used polymers with advanced architectures as multi-functional emulsifiers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗