Engineering Papers⌕ Search

Engineering topics

Houshmand, Bijan

Publications and source records attributed to Houshmand, Bijan.

6 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

IFSAR Simulation Using the Shooting and Bouncing Ray Technique

Interferometric Synthetic Aperture Radar (IFSAR) is a technique that allows an automated way to carry out terrain mapping. IFSAR is carried out by first generating a SAR image pair from two antennas that are spatially separated. The phase difference between the SAR image pair is proportional to the topography. After registering the SAR images, the difference in phase in each pixel is extracted to generate an interferogram. Since the phase can only be measured within 2pi radians, phase unwrapping is carried out to extract the absolute phase for each pixel that will be proportional to the local height. While IFSAR algorithm is typically applied to measurement data, it is useful to develop an IFSAR simulator to develop a better understanding of the IFSAR technique. The IFSAR simulator can be used in choosing system parameters, experimenting with processing procedures and mission planning. In this paper we will present an IFSAR simulation methodology to simulate the interferogram based on the shooting and bouncing ray (SBR) technique. SBR is a standard ray-tracing technique used to simulate scattering from large, complex targets. SBR is carried out by shooting rays at the target or scene. At the exit point of each ray, a ray-tube integration is done to find its contribution to the total field. A fast algorithm has been developed for the SBR for simulating SAR images of complex targets. In the IFSAR simulation, we build upon the fast SAR simulation technique. Given the antenna pair configuration, radar system parameters and the geometrical description of the scene, we first simulate two SAR images from each antenna. After post processing the two SAR images, we generate an interferogram. Phase unwrapping is then performed on the interferogram to arrive at the desired terrain map. We will present results from the SBR-based IFSAR simulator. The results will include terrain map reconstruction of urban environments. The reconstruction will be compared to the ground truth to examine the fidelity of the simulation. We will also investigate the effect of multi-bounce scattering in urban environments on phase unwrapping and reconstruction.

Houshmand, Bijan↗
NASA NTRS2000

TE/TM Simulations of Interferometric Measurements

Interferometric synthetic aperture radar (IFSAR) measurements at X-, C-, L-, and P-band are used to derive ground topography at meter level resolution. Interpretation of the derived topography requires attention due to the complex interaction of the radar signal with ground cover. The presence of penetrable surfaces such as vegetation, and tree canopies poses a challenge since the depth of penetration depends on a number of parameters such as the operating radar frequency, polarization, incident angle, as well as terrain structure. The dependence of the reconstructed topography on polarization may lead to the characterization of the ground cover. Simulation of interferometric measurements is useful for interpretation of the derived topography (B. Houshmand, Proceedings of URSI, 314, 1997). In this talk , time domain simulations for interferometric measurement for TE- and TM- polarization are presented. Time domain simulation includes the effects of the surface material property as well geometry comparable the radar signal wavelength (B. Houshmand, Proceedings of the URSI, 25, 1998). The IFSAR simulation is carried out in two steps. First, the forward scattering data is generated based on full wave analysis. Next, the electromagnetic information is inverted to generate surface topography. This inversion is based on the well known IFSAR processing technique which is composed of signal compression, and formation of an interferogram. The full wave forward scattering data is generated by the scattered-field formulation of the FDTD algorithm. The simulation is carried out by exciting the computational domain by a radar signal. The scattered field is then computed and translated to the receiving interferometric antennas using the time-domain Huygen's principle. The inversion process starts by compressing the time-domain data. The range compressed data from both receivers are then coregistered to form an interferogram. The resulting interferogram is then related to the ground topography using the radar imaging geometry. In this talk, the simulation results are compared with the C-band TM IFSAR derived topography, and the TE/TM SAR images at L-Band.

Houshmand, Bijan↗
NASA NTRS1994

(abstract) Two-Dimensional Surface Current in the Coastal Environment Using Vector Along-Track Interferometry

The structure of surface currents in the coastal environment can be very complex as it is governed by a multitude of factors such as local bathymetry, sea state, etc. Knowledge of the structure of coastal currents is a key requirement in the ability to carry out safe maneuvers and landings in an unknown coastal situation. Furthermore, it is desirable to have the ability to obtain such information by remote sensing and in a timely manner. We present a remote sensing technique which has the potential to meet certain specific requisites. We will present a theoretical discussion of the measurement technique, then will demonstrate the technique using data previously acquired and compare the results against conventional along-track interferometric measurements.

coastal currents sea state remote sensing syntheti↗
NASA NTRS1991

Cross polarization in beam waveguide-fed Cassegrain reflector antennas

The sensitivity of the cross-polarization level to a deviation from the geometrical condition derived by Mizusawa and Kitsuregawa (1973) for different geometrical configurations is studied. This condition restricts the number of possible beam waveguide configurations for beam waveguide-fed Cassegrain reflector (BFCR) antennas. For a symmetrical feed, this condition results in a symmetrical aperture distribution with no cross-polarized component. By examining a number of beam waveguide configurations satisfying the condition, it was observed that for linearly polarized feed, the cross-polarization level is very sensitive to a deviation from this condition. For circularly polarized feed, deviation from this condition does not increase the cross-polarization level; however, it results in the squinting of the beam for BFCRs.

Houshmand, Bijan↗
NASA NTRS1990

Analysis of near-field Cassegrain reflector - Plane wave versus element-by-element approach

A near-field Cassegrain reflector (NFCR) is an effective way to magnify a small phased array into a much larger-aperture antenna for limited scan applications. Traditionally the pattern analysis of NFCR is based on a plane wave approach, which simplifies the computation tremendously, but fails to provide design information about the most critical component of the whole antenna system, the feed array. Currently available computers make it possible to calculate the pattern of an NFCR by a more exact element-by-element approach. Each element in the feed array is considered individually, and the diffraction pattern from the subreflector is calculated by the geometrical theory of diffraction (including uniform theories at the shadow boundaries). The field contributions from all elements are superimposed at the curved main reflector surface, and a physical-optics integration is performed to obtain the secondary pattern.

Houshmand, Bijan↗