TPF coronagraph instrument design
Explore the source record for details and available documents.
coronagraph↗
Engineering topics
Hoppe, D. J.
Publications and source records attributed to Hoppe, D. J..
Application of a large space-based diffractive optical element telescope to the Terrestrial Planet-Finder Mission: design and tolerance issues
An analytical description of the scattered light from a 10 meter diameter Diffractive Optical Element lens-based telescope operating at 1 micron wavelength has been formulated.
DOE↗
Main-Reflector Manufacturing Technology for the Deep Space Optical Communications Ground Station
The Deep Space Network (DSN) has plans to develop a 10-m-diameter optical communications receiving station. The system uses the direct detection technique, which has much different requirements from a typical astronomical telescope. The receiver must operate in daylight and nighttime conditions. This imposes special requirements on the optical system to reject stray light from the Sun and other sources. One of the biggest challenges is designing a main-reflector surface that meets these requirements and can be produced at a reasonable cost. The requirements for the performance of the reflector are presented. To date, an aspherical primary reflector has been assumed. A reflector with a spherical reflector has a major cost advantage over an aspherical design, with no sacrifice in performance. A survey of current manufacturing techniques for optical mirrors of this type was performed. Techniques including solid glass, lightweight glass, diamond-turned aluminum, and composite mirrors were investigated.
Britcliffe, M. J.↗
Recent Trends in the Analysis of Quasioptical Systems
The recent trend in microwave instruments is the use of multiple millimeter and submillimeter wavelength bands. These systems are typically analyzed by using physical optics, Gaussian beams or ray tracing techniques. Physical optics offers high accuracy at the expense of computation time. This trade-off becomes particularly apparent in the analysis of multiple reflector antennas, such as beam waveguide antennas, where physical optics is used to compute the current on each reflector from the current on the previous reflector. At the other end of the spectrum is ray tracing approaches that ignore diffraction effects entirely. These methods are fast but sacrifice the ability to predict some effects accurately. An intermediate approach is to use an appropriate set of expansion functions to model the field between the reflectors. If the set is chosen wisely only a few coefficients need to be determined from each reflector current. The field is then computed at the next reflector through the use of the expansion functions and their coefficients rather than by using the previous reflector current. For a beam waveguide system with no enclosing tubes an excellent set of expansion functions is the Gaussian beam mode set. In many cases a preliminary design which includes the effects on diffraction may be obtained by considering only the fundamental mode and a thin lens model for the reflectors. Higher-order modes are included to model the effects of the curved reflector, which include asymmetric distortion of the beam, cross polarization, and beam truncation. This paper describes a computer code implementing higher-order Gaussian beam scattering by multiple reflector systems. There are four essential steps in the algorithm. (1) Compute the current on the first reflector using physical optics using either a feed model or by an incident set of Gaussian beam modes. (2) Find the direction of propagation for the reflected Gaussian beam-set using ray tracing. (3) Determine the waist size and location for the output beam set by examining the amplitude and phase distribution of the current on the reflector. (4) Compute the amplitudes of the individual modes in the output mode set. These steps are then repeated for each addition reflector in the chain. In each of these cases the previous Gaussian beam set provides the input field for the current calculation. Details of the four steps discussed above will be discussed. Examples will compare results from the Gaussian beam approach to pure physical optics, illustrating both its merits and limitations. Hybrid approaches capable of eliminating some of the limitations will also be discussed.
Hoppe, D. J.↗
Radiation from Axisymmetric Waveguide Fed Horns
Return losses and radiation patterns for axisymmetric waveguide fed horns are calculated with the finite element method (FEM) in conjunction with the method of moments (MoM) and the mode matching technique (MM).
waveguide fed horns horns axisymmetric waveguide↗
High Power Amplifier Harmonic Output Level Measurement
A method is presented for the measurement of the harmonic output power of high power klystron amplifiers, involving coherent hemispherical radiation pattern measurements of the radiated klystron output. Results are discussed for the operation in saturated and unsaturated conditions, and with a waveguide harmonic filter included.
klystron amplifiers harmonic output power measurem↗
A Hybrid Finite Element Method for Axisymmetric Waveguide fed Horns
A new method for finding radiation patterns and the reflection coefficients associated with an axisymmetric waveguide fed horn is presented. The approach is based on a hybrid finite element method (FEM) wherein the electromagnetic fields in the FEM region are coupled to the fields outside by two surface integral equations. Because of the local nature of the FEM, this formalism allows for the presence of inhomogeneities to be included in the problem domain. The matrix equation which results from the application of this method is shown to be complex-symmetric. It is, furthermore, diagonally dominant and sparse. Comparisons of calculated and measured data for two different horns show good agreement.
Hybrid↗
Scattering from the Quasi-Optical Ferrite Circulator Using a Coupled Integral Equation/FEM Solution
Ferrite materials are used in microwave devices that exploit the property of Faraday rotation to give non-reciprocal behavior. Examples of common waveguide components that use ferrite materials include circulators, isolators and gyrators.
DSN S and X band waveguide loss arcing problems hi↗
A Hybrid Symmetric FEM/MOM Formulation Applied to Scattering by Inhomogeneous Bodies of Revolution
A new symmetric formulation of the Hybrid Finite Element Method (HFEM) is described which combines elements of the Electric Field Integral Equation (EFIE) and the Magnetic Field Integral Equation (MFIE) for the exterior region along with the finite element solution for the interior problem. The formulation is applied to scattering by inhomogeneous bodies of revolution. To avoid spurious modes in the interior region a combination of vector and nodal based finite elements are used. Integral equations in the exterior region are used to enforce the Sommerfield radiation condition by matching both the tangential electric and magnetic fields between interior and exterior regions.
Lee, J-F.↗
A beamwaveguide design for high-power applications
A beam waveguide (BWG) design suitable for high-power applications is described. The design features a transmit-only, four-port high-gain horn as input to a BWG system with a single parabolic mirror and three flat plates. The use of a single parabolic mirror is such that the highest field concentration is no greater than that caused by the horn itself. The horn is linearly polarized and a grid reflector is used to reflect the orthogonal polarization into the receive feed. A rotatable dual polarizer provides for arbitrary transmit polarization. The dual-reflector system is shaped to provide uniform illumination over the main reflector and therefore maximum gain for the given size aperture. Measured data from a scale model BWG system are presented.
Imbriale, W. A.↗
Calculating Scattering At Circular-Waveguide Junctions
Computer program calculates scattering matrices for circular waveguides including step discontinuities between collinear sections of different radii. Radius and length of each section specified arbitrarily. Examples of devices analyzed with program include waveguides with single step discontinuities, matching sections, corrugated straight sections, and corrugated horns. Sections with smooth tapers and horns with arbitrary profiles approximated by series of small steps.
Hoppe, D. J.↗
Conceptual design of a 1-MW CW X-band transmitter for planetary radar
A proposed conceptual design to increase the output power of an existing X-band planetary radar transmitter used for planetary radar exploration from 365 kW to 1 MW CW is presented. The basic transmitter system requirements as dictated by the specifications for the radar are covered. The characteristics and expected performance of the high-power klystrons are considered, and the transmitter power amplifier system is discussed. Also included is the design of all of the associated high-power microwave components, the feed system, and the phase-stable exciter. The expected performance of the beam supply, heat exchanger, and monitor and control devices is also presented. Finally, an assessment of the state-of-the-art technology needed to meet system requirements is given and possible areas of difficulty are summarized.
Bhanji, A. M.↗
A multiflare horn with 1-megawatt power handling capability
The design and testing of the prototype horn for the proposed 1-megawatt radar are described. The unique features of this square horn include a multiflare design in which flare angle changes rather than corrugations are used to generate the required higher-order modes. A five-port combining section is used at the input. The design of this section and the multiflare section are described. Measured radiation patterns are in good agreement with theoretical patterns.
Hoppe, D. J.↗
Thermal measurements of microwave transmitter feedhorn window
Thermal measurements of microwave transmitter feedhorn windows were performed using an imaging infrared radiometer. The measurement technique is described and results are presented for windows made of 0.001-in. Kapton (trademark of Dupont Chemical Co.) and 0.1-in. HTP-6 (Space Shuttle tile material). Measured and calculated temperatures agree well.
Perez, R. M.↗
Modal analysis applied to circular, rectangular, and coaxial waveguides
Recent developments in the analysis of various waveguide components and feedhorns using Modal Analysis (Mode Matching Method) are summarized. A brief description of the theory is presented, and the important features of the method are pointed out. Specific examples in circular, rectangular, and coaxial waveguides are included, with comparisons between the theory and experimental measurements. Extensions to the methods are described.
Hoppe, D. J.↗
Conceptual design of a 1-MW CW X-band transmitter for planetary radar
A proposed conceptual design to increase the output power of an existing X-band radar transmitter used for planetary radar exploration from 365 kW to 1 MW CW is presented. The basic transmitter system requirements as dictated by the specifications for the radar are covered. The characteristics and expected performance of the high-power klystrons are considered, and the transmitter power amplifier system is described. Also included is the design of all of the associated high-power microwave components, the feed system, and the phase-stable exciter. The expected performance of the beam supply, heat exchanger, and monitor and control devices is also presented. Finally, an assessment of the state-of-the-art technology needed to meet system requirements is given and possible areas of difficulty are summarized.
Bhanji, A. M.↗
Long-term amplitude and phase stability of the 400-kW 2.115-GHz transmitter
Results of recent measurements of the long-term phase, amplitude and group delay stability of the 400-kW S-band (2.115-GHz) transmitter are reported. Various control parameters which are responsible for many of the observed instabilities are identified. Further tests to identify the parameters responsible for the remaining instabilities are suggested.
Hoppe, D. J.↗
The Effects of Mode Impurity of Ka-band System Performance
Problems associated with spurious mode generation in the proposed Ka-Band gyroklystron transmitter tube, overmoded transmission line, and feed are discussed. A brief description of the overall problem is presented. The theory used to evaluate feed and antenna performance when spurious modes are present is given. Results for feed patterns and overall antenna patterns for various levels and types of spurious modes are presented. Worst case antenna efficiency is calculated as a function of spurious mode level. Conclusions are drawn regarding the results of this study and their application to specifications on the transmitter tube and transmission line system.
Hoppe, D. J.↗