Engineering topics

Hopkins, D. A.

Publications and source records attributed to Hopkins, D. A..

29 records · Page 2

NASA NTRS1989

The 3-D inelastic analyses for computational structural mechanics

The 3-D inelastic analysis method is a focused program with the objective to develop computationally effective analysis methods and attendant computer codes for three-dimensional, nonlinear time and temperature dependent problems present in the hot section of turbojet engine structures. Development of these methods was a major part of the Hot Section Technology (HOST) program over the past five years at Lewis Research Center.

Hopkins, D. A.↗

NASA NTRS1989

Metal matrix composite micromechanics - In situ behavior influence on composite properties

The influence of in situ fiber and matrix properties (such as in situ matrix strength and the interphase degradation) of high-temperature metal matrix composites (HTMMCs) on the unidirectional stress-strain behavior of the composite is examined using results of a numerical investigation of a SiC/Ti-15-3-3-3 unidirectional composite. It is shown that a reduction of the in situ matrix strength substantially decreases the transverse and the longitudinal tensile/compressive strengths, as well as the in-plane shear strength, of the composite. The interphase degradation affects the behavior in transverse tension/compression drastically; both the ultimate strength and strain showed significant reductions. The higher use temperature results in a reduction in the ultimate strength and in the initial tangential modulus for compression and for in-plane shear loading.

Murthy, P. L. N.↗

NASA NTRS1988

Computational simulation of high temperature metal matrix composites cyclic behavior

A procedure was developed and is described which can be used to computationally simulate the cyclic behavior of high temperature metal matrix composites (HTMMC) and its degradation effects on the structural response. This procedure consists of HTMMC mechanics coupled with a multifactor interaction constituent material relationship and with an incremental iterative nonlinear analysis. The procedure is implemented in a computer code that can be used to computationally simulate the thermomechanical behavior of HTMMC starting from the fabrication process and proceeding through thermomechanical cycling, accounting for the interface/interphase region. Results show that combined thermal/mechanical cycling, the interphase, and in situ matrix properties have significant effects on the structural integrity of HTMMC.

Chamis, C. C.↗

NASA NTRS1988

Probabilistic structural analysis methods development for SSME

The development of probabilistic structural analysis methods is a major part of the SSME Structural Durability Program and consists of three program elements: composite load spectra, probabilistic finite element structural analysis, and probabilistic structural analysis applications. Recent progress includes: (1) the effects of the uncertainties of several factors on the HPFP blade temperature pressure and torque, (2) the evaluation of the cumulative distribution function of structural response variables based on assumed uncertainties on primitive structural variables, and (3) evaluation of the failure probability. Collectively, the results obtained demonstrate that the structural durability of critical SSME components can be probabilistically evaluated.

Chamis, C. C.↗

NASA NTRS1988

An expert system for probabilistic description of loads on space propulsion system structural components

LDEXPT, an expert system that generates probabilistic characterizations of the loads spectra borne by spacecraft propulsion systems' structural components, is found by recent experience at NASA-Lewis to be useful in the cases of components representative of the Space Shuttle Main Engine's turbopumps and fluid transfer ducting. LDEXPT is composed of a knowledge base management system and a rule base management system. The ANLOAD load-modeling module of LDEXPT encompasses three independent probabilistic analysis techniques.

Spencer, B. F., Jr.↗

NASA NTRS1987

Optimization and analysis of gas turbine engine blades

A gas turbine engine blade design is optimized using STAEBL. To validate the STAEBL analysis, the optimized blade design is analyzed using MARC, MHOST and BEST3D. The results show good agreement between STAEBL, MARC, and MHOST. The conclusion is that STAEBL can be used to optimize an engine blade design.

Vandenbrink, D. J.↗

NASA NTRS1985

Nonlinear structural analysis for fiber-reinforced superalloy turbine blades

A computational capability for predicting the nonlinear thermomechanical structural response of fiber-reinforced superalloy (FRS) turbine blades is described. This capability is embedded in a special purpose computer code (COBSTRAN) developed at the NASA Lewis Research Center. Special features of this computational capability include accounting for: fiber/matrix reaction, nonlinear and anisotropic material behavior, complex stress distribution due to local and global heterogeneity, and residual stresses due to initial fabrication and/or inelastic behavior during subsequent missions. Numerical results are presented from analyses of a hypothetical FRS turbine blade subjected to a fabrication process and subsequent mission cycle. The results demonstrate the capabilities of this computational tool to; predict local stress/strain response and capture trends of local nonlinear and anisotropic material behavior, relate the effects of this local behavior to the global response of a multilayered fiber-composite turbine blade, and trace material history from fabrication through successive missions.

Hopkins, D. A.↗

NASA NTRS1985

Thermoviscoplastic nonlinear constitutive relationships for structural analysis of high temperature metal matrix composites

A set of thermoviscoplastic nonlinear constitutive relationships (1VP-NCR) is presented. The set was developed for application to high temperature metal matrix composites (HT-MMC) and is applicable to thermal and mechanical properties. Formulation of the TVP-NCR is based at the micromechanics level. The TVP-NCR are of simple form and readily integrated into nonlinear composite structural analysis. It is shown that the set of TVP-NCR is computationally effective. The set directly predicts complex materials behavior at all levels of the composite simulation, from the constituent materials, through the several levels of composite mechanics, and up to the global response of complex HT-MMC structural components.

Chamis, C. C.↗

NASA NTRS1985

A unique set of micromechanics equations for high temperature metal matrix composites

A unique set of micromechanic equations is presented for high temperature metal matrix composites. The set includes expressions to predict mechanical properties, thermal properties and constituent microstresses for the unidirectional fiber reinforced ply. The equations are derived based on a mechanics of materials formulation assuming a square array unit cell model of a single fiber, surrounding matrix and an interphase to account for the chemical reaction which commonly occurs between fiber and matrix. A three-dimensional finite element analysis was used to perform a preliminary validation of the equations. Excellent agreement between properties predicted using the micromechanics equations and properties simulated by the finite element analyses are demonstrated. Implementation of the micromechanics equations as part of an integrated computational capability for nonlinear structural analysis of high temperature multilayered fiber composites is illustrated.

Hopkins, D. A.↗

NASA NTRS1984

Nonlinear analysis for high-temperature multilayered fiber composite structures

A unique upward-integrated top-down-structured approach is presented for nonlinear analysis of high-temperature multilayered fiber composite structures. Based on this approach, a special purpose computer code was developed (nonlinear COBSTRAN) which is specifically tailored for the nonlinear analysis of tungsten-fiber-reinforced superalloy (TFRS) composite turbine blade/vane components of gas turbine engines. Special features of this computational capability include accounting of; micro- and macro-heterogeneity, nonlinear (stess-temperature-time dependent) and anisotropic material behavior, and fiber degradation. A demonstration problem is presented to mainfest the utility of the upward-integrated top-down-structured approach, in general, and to illustrate the present capability represented by the nonlinear COBSTRAN code. Preliminary results indicate that nonlinear COBSTRAN provides the means for relating the local nonlinear and anisotropic material behavior of the composite constituents to the global response of the turbine blade/vane structure.

Hopkins, D. A.↗

NASA NTRS1984

Nonlinear Analysis for High-temperature Composites: Turbine Blades/vanes

An integrated approach to nonlinear analysis of high-temperature composites in turbine blade/vane applications is presented. The overall strategy of this approach and the key elements comprising this approach are summarized. Preliminary results for a tungsten-fiber-reinforced superalloy (TFRS) composite are discussed.

Hopkins, D. A.↗