Engineering Papers⌕ Search

Engineering topics

Holst, Terry L.

Publications and source records attributed to Holst, Terry L..

53 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Computational fluid dynamics drag prediction: Results from the Viscous Transonic Airfoil Workshop

Results from the Viscous Transonic Airfoil Workshop held in January 1987, are compared with each other and with experimental data. Test cases used include attached and separated transonic flows for the NACA 0012 airfoil. A total of 23 sets of numerical results from 15 different author groups are included. The numerical methods used vary widely and include: 16 Navier-Stokes methods, 2 Euler/boundary-layer methods, and 5 potential/boundary-layer methods. The results indicate a high degree of sophistication among the numerical methods with generally good agreement between the various computed and experimental results for attached or moderately separated cases. The agreement for cases with larger separation is only fair and suggests additional work is required in this area.

Holst, Terry L.↗
NASA NTRS1989

Supercomputer applications in computational fluid dynamics

The field of computational fluid dynamics (CFD) using large-scale supercomputer applications is discussed. Formulational and computational requirements for the various governing equations, including the Euler and Navier-tokes approaches, are examined for typical problems including the viscous flow field solution about a complete aerospace vehicle. Recent computed results and experimental comparisons are given to highlight the presentation. The future of CFD associated with three-dimensional applications is found to be rapidly expanding across a broad front, including internal and external flows and flows across the entire speed regime.

Holst, Terry L.↗
NASA NTRS1988

Calculations Of Transonic Flow About A Wing

Report describes calculations of transonic airflows about wing in wind tunnel. Basic equations of flow used in study are Reynolds-averaged Navier-Stokes equations in strong conservation-law form. Equations of flow incorporated into finite-difference computer code called TNS (Transonic Navier-Stokes). Computational grid generated by solution of partial differential equations yielding smooth meshes conforming to surfaces of wing and wind tunnel.

Holst, Terry L.↗
NASA NTRS1988

Computational fluid dynamics drag prediction: Results from the Viscous Transonic Airfoil Workshop

Results from the Viscous Transonic Airfoil Workshop are compared with each other and with experimental data. Test cases used include attached and separated transonic flows for the NACA 0012 airfoil. A total of 23 sets of numerical results from 15 different author groups are included. The numerical method used vary widely and include: 16 Navier-Stokes methods, 2 Euler boundary layer methods, and 5 potential boundary layer methods. The results indicate a high degree of sophistication among the numerical methods with generally good agreement between the various computed and experimental results for attached or moderately separated cases. The agreement for cases with larger separation is only fair and suggests additional work is required in this area.

Holst, Terry L.↗
NASA NTRS1987

Viscous Transonic Airfoil Workshop compendium of results

Results from the Viscous Transonic Airfoil Workshop held at the AIAA 25th Aerospace Sciences Meeting at Reno, NV in January 1987, are compared with each other and with experimental data. Test cases used in this workshop include attached and separated transonic flows for three different airfoils: the NACA 0012 airfoil, the RAE 2822 airfoil, and the Jones airfoil. A total of 23 sets of numerical results from 15 different author groups are included. The numerical methods used vary widely and include: 16 Navier-Stokes methods, 2 Euler/boundary-layer methods, and 5 full-potential/boundary-layer methods. The results indicate a high degree of sophistication among the numerical methods with generally good agreement between the various computed and experimental results for attached or moderately-separated cases. The agreement for cases with larger separation is only fair and suggests additional work is required in this area.

Holst, Terry L.↗
NASA NTRS1987

Numerical solution of the Navier-Stokes equations about three-dimensional configurations: A survey

The numerical solution of the Navier-Stokes equations about three-dimensional configurations is reviewed. Formulational and computational requirements for the various Navier-Stokes approaches are examined for typical problems including the viscous flow field solution about a complete aerospace vehicle. Recent computed results, with experimental comparisons when available, are presented to highlight the presentation. The future of Navier-Stokes applications in three-dimensions is seen to be rapidly expanding across a broad front including internal and external flows, and flows across the entire speed regime from incompressible to hypersonic applications. Prospects for the future are described and recommendations for areas of concentrated research are indicated.

Holst, Terry L.↗
NASA NTRS1987

Computation of viscous transonic flow over porous airfoils

The viscous effects on transonic flow past an airfoil which contains a shallow cavity beneath a porous surface are studied numerically. The porous region occupies a small portion of the total airfoil surface, and is located near the shock. Both an interactive boundary layer (IBL) algorithm and a thin-layer Navier-Stokes (TLNS) algorithm have been modified for use in studying the outer flow, whereas a stream-function formulation has been used to model the inner flow in the small cavity. The coupling procedure at the porous surface is based on Darcy's law and on the assumption of a constant total presusre in the cavity. In addition, a modified Baldwin-Lomax turbulence model is used to consider the transpired turbulent boundary layer in the TLNS approach, and the Cebeci-Smith turbulence model is used in the IBL approach. According to the present analysis, a porous surface can reduce the wave drag appreciably, but it can also increase viscous losses. As has been observed experimentally, the numerical results indicate that the total drag is reduced at higher Mach numbers and increased at lower Mach numbers when the angles of attack are small. Furthermore, the streamline patterns of passive-shock and boundary-layer interaction are revealed in this study.

Chow, Chuen-Yen↗
NASA NTRS1987

Transonic Navier-Stokes solutions for a fighter-like configuration

The Transonic Navier-Stokes wing code is extended to a 16-zone TNS wing-fuselage code and used to solve the transonic viscous flow over a modified F-16A. The computer code, called Transonic Navier-Stokes Wing/Fuselage uses a zonal approach to solve the three-dimensional Euler and Navier-Stokes equations. With the zonal implementation, clustering suitable for viscous calculations is achieved on all solid surfaces. The transonic case has flow conditions of free-stream M = 0.9, alpha = 4.12 deg, and a Reynolds number based on root chord of 4.5 million. This case required about 3,000 iterations to reduce the L2-norm of the residual by three orders, which takes about 15 hr of cpu time on the Cray X-MP/48 processor. Pressure distributions, as well as separaton patterns, compare favorably with experiment for this transonic case.

Flores, Jolen↗
NASA NTRS1987

Numerical solution of the Navier-Stokes equations with emphasis on rotorcraft applications

Recent advances in CFD are surveyed, with a focus on the applicability of codes based on the Navier-Stokes (NS) equations to helicopter aerodynamics. The developmental history of two- and three-dimensional NS codes is recalled; the formulations employed by codes of increasing complexity are outlined; and previous reviews are noted. Particular attention is given to Reynolds-averaged NS methods and their use in analyzing subsonic, transonic, and vortex-dominated flows. Typical numerical results are compared with experimental data in diagrams and graphs, and a number of outstanding problems are considered.

Holst, Terry L.↗
NASA NTRS1987

Needs and status of CFD code validation

The two types of Computational Fluid Dynamics code validations, solution-to-solution comparison and solution-to-experiment comparison, are discussed. It is suggested that to develop more detailed experiments the following things are necessary: (1) further development of turbulence models; (2) better methods for numerical validation of CFD codes; (3) evaluation of disagreements; and (4) continued determination of experimental scatter. All data and results are presented in viewgraph form.

Holst, Terry L.↗
NASA NTRS1986

Computation of transonic separated wing flows using an Euler/Navier-Stokes zonal approach

A computer program called Transonic Navier Stokes (TNS) has been developed which solves the Euler/Navier-Stokes equations around wings using a zonal grid approach. In the present zonal scheme, the physical domain of interest is divided into several subdomains called zones and the governing equations are solved interactively. The advantages of the Zonal Grid approach are as follows: (1) the grid for any subdomain can be generated easily; (2) grids can be, in a sense, adapted to the solution; (3) different equation sets can be used in different zones; and, (4) this approach allows for a convenient data base organization scheme. Using this code, separated flows on a NACA 0012 section wing and on the NASA Ames WING C have been computed. First, the effects of turbulence and artificial dissipation models incorporated into the code are assessed by comparing the TNS results with other CFD codes and experiments. Then a series of flow cases is described where data are available. The computed results, including cases with shock-induced separation, are in good agreement with experimental data. Finally, some futuristic cases are presented to demonstrate the abilities of the code for massively separated cases which do not have experimental data.

Kaynak, Uenver↗
NASA NTRS1980

Fast, Conservative Algorithm for Solving the Transonic Full-Potential Equation

A fast, fully implicit approximate factorization algorithm designed to solve the conservative, transonic, full-potential equation in either two or three dimensions is described. The algorithm uses an upwind bias of the density coefficient for stability in supersonic regions. This provides an effective upwind difference of the streamwise terms for any orientation of the velocity vector (i.e., rotated differencing), thereby greatly enhancing the reliability of the present algorithm. A numerical transformation is used to establish an arbitrary body-fitted, finite-difference mesh. Computed results for both airfoils and simplified wings demonstrate substantial improvement in convergence speed for the new algorithm relative to standard successive-line over-relaxation algorithms.

Holst, Terry L.↗