Engineering Papers⌕ Search

Engineering topics

Holmes, J. K.

Publications and source records attributed to Holmes, J. K..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

A comparison of Manchester symbol tracking loops for block 5 applications

The linearized tracking errors of three Manchester (biphase coded) symbol tracking loops are compared to determine which is appropriate for Block 5 receiver applications. The first is a nonreturn to zero (NRZ) symbol synchronizer loop operating at twice the symbol rate (NRZ x 2) so that it operates on half symbols. The second near optimally processes the mid-symbol transitions and ignores the between symbol transitions. In the third configuration, the first two approaches are combined as a hybrid to produce the best performance. Although this hybrid loop is the best at low symbol signal to noise ratios (SNRs), it has about the same performance as the NRZ x 2 loop at higher SNRs (greater than 0-dB E sub s/N sub 0). Based on this analysis, it is tentatively recommended that the hybrid loop be implemented for Manchester data in the Block 5 receiver. However, the high data rate case and the hardware implications of each implementation must be understood and analyzed before the hybrid loop is recommended unconditionally.

Holmes, J. K.↗
NASA NTRS1991

Open-loop frequency acquisition for suppressed-carrier biphase signals using one-pole arm filters

Open loop frequency acquisition performance is discussed for suppressed carrier binary phase shift keyed signals in terms of the probability of detecting the carrier frequency offset when the arms of the Costas loop detector have one pole filters. The approach, which does not require symbol timing, uses fast Fourier transforms (FFTs) to detect the carrier frequency offset. The detection probability, which depends on both the 3 dB arm filter bandwidth and the received symbol signal to noise ratio, is derived and is shown to be independent of symbol timing. It is shown that the performance of this technique is slightly better that other open loop acquisition techniques which use integrators in the arms and whose detection performance varies with symbol timing.

Shah, B.↗
NASA NTRS1991

Analysis of digital matched filtering schemes for digital receiver applications using simulation methods

The next generation of digital receivers for NASA's Deep Space Network is composed of in-phase and quadrature-phase channels. The authors have modeled and simulated a quadrature-phase baseband channel that includes a low-pass filter and a digital matched filter. The simulation is used to study the performance of the three schemes of digital matched filtering that use digital weighted integrate-and-dump filters. Using three methods for calculating the near-optimum matched filter weight coefficients, the simulation results are analyzed for the NRZ and Manchester data formats. The performances of the digital matched filters are studied in the presence of a timing error between the demodulated symbols and the integrate-and-dump filters.

Gevargiz, J. M.↗
NASA NTRS1989

A simplified procedure for decoding the (23,12) and (24,12) Golay codes

A simplified procedure is developed to decode the three possible erors in a (23,12) Golay codeword. A computer simulation shows that this algorithm is modular, regular and naturally suitable for both Very Large Scale Integration (VLSI) and software implementation. An extension of this new decoding procedure is used also to decode the 1/2-rate (24,12) Golay code, thereby correcting three and detecting four errors.

Truong, T. K.↗
NASA NTRS1984

Space Shuttle program communication and tracking systems interface analysis

The Space Shuttle Program Communications and Tracking Systems Interface Analysis began April 18, 1983. During this time, the shuttle communication and tracking systems began flight testing. Two areas of analysis documented were a result of observations made during flight tests. These analyses involved the Ku-band communication system. First, there was a detailed analysis of the interface between the solar max data format and the Ku-band communication system including the TDRSS ground station. The second analysis involving the Ku-band communication system was an analysis of the frequency lock loop of the Gunn oscillator used to generate the transmit frequency. The stability of the frequency lock loop was investigated and changes to the design were reviewed to alleviate the potential loss of data due the loop losing lock and entering the reacquisition mode. Other areas of investigation were the S-band antenna analysis and RF coverage analysis.

Dodds, J. G.↗
NASA NTRS1981

Preliminary Centaur Systems Analysis

The Centaur is stored in the Orbiter payload bay on the Centaur Integrated Support System (CISS). The CISS not only cradles the Centaur prior to deployment but also provides any signal conditioning required to make the Centaur/Orbiter hardwire interfaces compatible. In addition, the CISS provides other Centaur functions such as controlling all the avionics safety features and providing all the helium supplies for tank pressurizations. Problems associated with a Centaur design concept using a transponder and two switchable antennas are defined. Solutions to these problems are presented.

Maronde, R. G.↗
NASA NTRS1980

Shuttle orbiter Ku-band radar/communications system design evaluation. Ku band bent-pipe channel performance evaluation

Because of difficulties with the bit detector of the SPA mode 1 channel 3 input port, a new bit synchronizer was required. The two prime candidate designs are described and analyzed. The selected design is a modification of one which utilizes a phase frequency detector to track the received data clock frequency and a mid-bit transition point sample detector to generate a bit timing error (phase error) signal to control the relative phase between the local clock and the local data stream. The model used to calculate the effects of cable attenuation and rise time degradation is discussed.

Holmes, J. K.↗
NASA NTRS1980

Critique of the Hughes Aircraft shuttle Ku band leading edge bit synchronizer

A bit synchronizer is analyzed via timing diagrams in a noise-free environment. It is believed that this new bit synchronizer will track the rising edge of the data bits with 25% asymmetry and up to a 90 deg phase shift between the received clock and data bit timing. In addition, the data bits will be demodulated correctly. It is not true that phase shifts larger than 90 deg will necessarily be corrected by this bit synchronizer. However, the specifications currently require the loop to operate over only a + or - 75 deg phase shift between the received data stream leading edges and the bit synchronizer leading edges; consequently, there should be no problem.

Holmes, J. K.↗
NASA NTRS1980

Critique of a Hughes shuttle Ku-band data sampler/bit synchronizer

An alternative bit synchronizer proposed for shuttle was analyzed in a noise-free environment by considering the basic operation of the loop via timing diagrams and by linearizing the bit synchronizer as an equivalent, continuous, phased-lock loop (PLL). The loop is composed of a high-frequency phase-frequency detector which is capable of detecting both phase and frequency errors and is used to track the clock, and a bit transition detector which attempts to track the transitions of the data bits. It was determined that the basic approach was a good design which, with proper implementation of the accumulator, up/down counter and logic should provide accurate mid-bit sampling with symmetric bits. However, when bit asymmetry occurs, the bit synchronizer can lock up with a large timing error, yet be quasi-stable (timing will not change unless the clock and bit sequence drift). This will result in incorrectly detecting some bits.

Holmes, J. K.↗
NASA NTRS1979

Pre-A/D filter and AGC requirements for multimegabit telemetry data detection

A candidate pre-Analog to Digital filter bandwidth versus data rate design is presented for the multimegabit telemetry demodulator/detector. The design is based on considerations of Analog to Digital bias, quantization errors, and automatic gain control effects, as well as the deleterious effects of filtering. Two methods of gain control of the input level to the analog to Digital converter are considered. The first method uses a particular value of gain, according to which bandwidth is selected. The second method uses a second narrowband noncoherent Automatic Gain Controls (in the LPF bandwidth) to attempt to keep the Analog to Digital input level constant. This second method reduces the bit error rate degradation slightly but appears to be more difficult to implement.

Holmes, J. K.↗
NASA NTRS1978

Spread spectrum acquisition and tracking performance for Shuttle communication links

The spread spectrum acquisition and tracking performance for the Shuttle S-band and Ku-band communication links are analyzed and compared to test results. The S-band link requirements are more severe than those of the Ku-band links, hence, different despreader designs were developed for the two systems. The S-band despreader acquires pseudonoise code lock by examining all possible code phases in half chip steps while the Ku-band despreader acquires pseudonoise code lock by continuously sweeping a tau-jitter loop. Both despreaders employ a tau-jitter loop for code tracking. The code tracking performance is computed for the tau-jitter loop and compared to that of the more complex delay lock loop.

Alem, W. K.↗
NASA NTRS1978

False lock performance of Shuttle Costas loop receivers

The false (sideband) lock problem in Shuttle Costas loop receivers, in the presence of noise, is assessed. False lock margin is defined depending on symbol signal-to-noise ratio rather than in the absence of noise. Closed-form results are given for the case where the arm filters of the Costas loop are one-pole Butterworth filters as used in the Shuttle receivers. However, the approach taken is also general enough to cover filters of arbitrary characteristics. As part of the development of the false lock margin, it is shown that the false lock phenomenon of the squaring loop is identical to that of the Costas loop.

Woo, K. T.↗
NASA NTRS1978

Use of a priori statistics to minimize acquisition time for RFI immune spread spectrum systems

The optimum acquisition sweep strategy was determined for a PN code despreader when the a priori probability density function was not uniform. A psuedo noise spread spectrum system was considered which could be utilized in the DSN to combat radio frequency interference. In a sample case, when the a priori probability density function was Gaussian, the acquisition time was reduced by about 41% compared to a uniform sweep approach.

Holmes, J. K.↗