Engineering Papers⌕ Search

Engineering topics

Holmes, Bruce J.

Publications and source records attributed to Holmes, Bruce J..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Liquid-Crystal Coats Help Make Flows Visible

Visible indication of transition of boundary layer from laminar to turbulent flow plays important role in aerodynamic tests in wind tunnels and in flight. In newly developed method, liquid-crystal coats used to make visible such features of boundary-layer flows as transitions, separations, and locations of shocks. Changes of color rapid and reversible. For flight applications, provides capability for making transitions visible throughout almost entire altitude and speed ranges of subsonic aircraft. Also applicable to visible indication of supersonic flows and suitable for general use in high- and low-speed wind-tunnel and water-tunnel testing.

Holmes, Bruce J.↗
NASA NTRS1991

Crescent Wing Planforms Reduce Lift-Dependent Drag

New understanding of optimization of design of wing to minimize induced drag developed by use of computational methods that account properly for nonlinear effects of deflected wake, nonplanar shape of wing, and vortex rollup. Crescent planforms are lunate shapes like some found in nature, similar to certain bird wings and fish fins. Theoretical and experimental analyses reveals superior aerodynamic efficiency and improved high-angle-of-attack characteristics.

Holmes, Bruce J.↗
NASA NTRS1990

Passive laminar flow control of crossflow vorticity

A passive laminar flow crossflow vorticity control system includes an aerodynamic or hydrodynamic surface having geometric perturbations. The perturbations include peaks and valleys having a predetermined spacing and aligned approximately in a streamline direction to force the formation of crossflow vortices. This minimizes amplification and growth of the vortices, thus delaying transition to turbulence and reducing overall drag.

Holmes, Bruce J.↗
NASA NTRS1990

Aeronautical research in the United States - Challenges for the 1990's

An overview is presented of NASA R&D initiatives in air transportation technologies that will dominate its efforts through the 1990s. These efforts are to be concentrated in (1) advanced subsonic transports with greater fuel economy, passenger capacity, and control effectiveness, whose design will be undertaken with state-of-the-art CFD and CAD/CAM systems; (2) a second-generation SST whose propulsion system will be substantially more fuel-efficient than that of Concorde and have far lower atmospheric emissions; and (3) a hypersonic transport predicated on the results of research into materials, cryogenic fuels, propulsion cycles, and propulsion/airframe aerodynamics integration, which will be undertaken in connection with the X-30 testbed.

Petersen, Richard H.↗
NASA NTRS1990

NASA aerodynamics program

Presented here is a comprehensive review of the following aerodynamics elements: computational methods and applications, computational fluid dynamics (CFD) validation, transition and turbulence physics, numerical aerodynamic simulation, drag reduction, test techniques and instrumentation, configuration aerodynamics, aeroacoustics, aerothermodynamics, hypersonics, subsonic transport/commuter aviation, fighter/attack aircraft and rotorcraft.

Holmes, Bruce J.↗
NASA NTRS1990

Developments in flow visualization methods for flight research

With the introduction of modern airplanes utilizing laminar flow, flow visualization has become an important diagnostic tool in determining aerodynamic characteristics such as surface flow direction and boundary-layer state. A refinement of the sublimating chemical technique has been developed to define both the boundary-layer transition location and the transition mode. In response to the need for flow visualization at subsonic and transonic speeds and altitudes above 20,000 feet, the liquid crystal technique has been developed. A third flow visualization technique that has been used is infrared imaging, which offers non-intrusive testing over a wide range of test conditions. A review of these flow visualization methods and recent flight results is presented for a variety of modern aircraft and flight conditions.

Holmes, Bruce J.↗
NASA NTRS1989

Induced drag - Historical perspective

Induced drag is associated with the shedding of vorticity along the span of a finite wing, especially its tip region; for most subsonic aircraft configurations, induced drag constitutes about 50 percent of total aircraft drag throughout the flight envelope. NASA and the U.S. aircraft industry have aggressively studied induced-drag reduction methods. The state-of-the-art CTOL commercial aircraft wing is as a result of these efforts virtually optimal, with a total induced drag lying within a percent of the theoretical minimum. Many of the devices currently under study for induced drag reduction are added to wingtips, yielding benefits through their effects on the wake vortex as well as through forces generated in the flowfield.

Henderson, William P.↗
NASA NTRS1988

Laminar-Separation Sensor

Sensor detects flow reversal in boundary layer. Laminar-separation sensor provides means for detecting laminar-separation bubble by use of very thin, surface-mounted sensor. Consists of flush array of three proximate thin films. Middle film electronically heated by means of constant-temperature anemometer (CTA). Outer films, one upstream and one downstream of middle film, incorporated into bridge circuit to respond as resistance thermometers. This sensor provides only known surface-mounted means for positively identifying pressure of laminar separation as cause of boundary-layer transition.

Holmes, Bruce J.↗
NASA NTRS1988

Crossflow vorticity sensor

A crossflow vorticity sensor for the detection of crossflow vorticity characteristics is described. The sensor is comprised of crossflow sensors which are noninvasively adhered to a swept wing laminar surface either singularly, in multi-element strips, in polar patterns, or in orthogonal patterns. These crossflow sensors are comprised of hot-film sensor elements which operate as a constant temperature anemometer circuit to detect heat transfer rate changes. Accordingly, crossflow vorticity characteristics are determined via cross-correlation. In addition, the crossflow sensors have a thickness which does not exceed a maximum value h in order to avoid contamination of downstream crossflow sensors.

Holmes, Bruce J.↗
NASA NTRS1988

Laminar-Boundary-Layer Crossflow Sensor

Crossflow vorticity detected with nonintrusive electronic sensor elements. Individual crossflow sensor elements respond to variation in heat transfer caused by laminar-crossflow vortexes. Installed in variety of patterns, including staggered or combined into continuous longitudinal strip.

Holmes, Bruce J.↗
NASA NTRS1988

NLF technology is ready to go

Natural laminar flow (NLF) can reduce drag on aircraft developed using modern structural design methods. Modern metal and composite construction methods can meet NLF requirements for subsonic commuter and business airframes. NLF research at NASA concentrates on expanding the practical application of NLF drag reduction technology; payoffs include progress with liquid-crystal flow visualization, NLF on three-dimensional bodies, and the effects of acoustics on laminar stability. Fuel savings from 2 to 4 percent are expected if laminar flow could be achieved over the forward 50 percent of engine nacelles on large transports depending on the configuration. It is concluded that the skill required to use NLF for drag reduction depends on understanding the conservative design corridors within which laminar flow is durable and reliable.

Holmes, Bruce J.↗
NASA NTRS1987

Advanced measurement techniques, part 1

In modern laminar flow flight and wind tunnel research, it is important to understand the specific cause(s) of laminar to turbulent boundary layer transition. Such information is crucial to the exploration of the limits of practical application of laminar flow for drag reduction on aircraft. The process of transition involves both the possible modes of disturbance growth, and the environmental conditioning of the instabilities by freestream or surface conditions. The possible modes of disturbance growth include viscous, inviscid, and modes which may bypass these natural ones. Theory provides information on the possible modes of disturbance amplification, but experimentation must be relied upon to determine which of those modes actually dominates the transition process in a given environment. The results to date of research on advanced devices and methods used for the study of transition phenomena in the subsonic and transonic flight and wind tunnel environments are presented.

Holmes, Bruce J.↗
NASA NTRS1987

Experimental and numerical analyses of laminar boundary-layer flow stability over an aircraft fuselage forebody

Fuelled by a need to reduce viscous drag of airframes, significant advances have been made in the last decade to design lifting surface geometries with considerable amounts of laminar flow. In contrast to the present understanding of practical limits for natural laminar flow over lifting surfaces, limited experimental results are available examining applicability of natural laminar flow over axisymmetric and nonaxisymmetric fuselage shapes at relevantly high length Reynolds numbers. The drag benefits attainable by realizing laminar flow over nonlifting aircraft components such as fuselages and nacelles are shown. A flight experiment to investigate transition location and transition mode over the forward fuselage of a light twin engine propeller driven airplane is examined.

Vijgen, Paul M. H. W.↗
NASA NTRS1987

Coatings Show Laminar Boundary-Layer Transitions

New method, utilizing liquid-crystal coatings, provides means to visualize transition in flight. Difference in levels of relative shear stress or skin friction between laminar and turbulent boundary layers one order of magnitude. Difference in skin friction is physical parameter to which liquid crystals respond. Transition measured and documented on aircraft in flight at altitudes above 20,000 ft., up to at least 50,000 ft. at subsonic and supersonic speeds. Technique has rapid response and reversible; capability of indicating unlimited number of transition locations during single flight.

Holmes, Bruce J.↗
NASA NTRS1987

Advances in flow visualization using liquid-crystal coatings

This paper discusses a new four-part mixing method for visualizing boundary layer flows, including transitions, separation, and shock locations, by the use of liquid-crystal coatings. The method controls the event temperature and color-play bandwidth best suited to specific experimental conditions, and is easily learned. The method is applicable almost throughout the altitude and speed ranges for subsonic aircraft flight envelopes, and is also applicable to supersonic flow visualization and for general use in high- and low-speed wind tunnel and water tunnel testing.

Holmes, Bruce J.↗
NASA NTRS1986

Roughness and waviness requirements for laminar flow surfaces

Many modern metal and composite airframe manufacturing techniques can provide surface smoothness which is compatible with natural laminar flow (NLF) requirements. An important consideration is manufacturing roughness of the surface in the form of steps and gaps perpendicular to the freestream. The principal challenge to the design and manufacture of laminar flow surfaces today appears to be in the installation of leading-edge panels on wing, nacelle, and empennage surfaces. A similar challenge is in the installation of access panels, doors, windows, fuselage noses, and engine nacelles. Past work on roughness and waviness manufacturing tolerances and comparisons with more recent experiments are reviewed.

Obara, Clifford J.↗
NASA NTRS1986

Insect contamination protection for laminar flow surfaces

The ability of modern aircraft surfaces to achieve laminar flow was well-accepted in recent years. Obtaining the maximum benefit of laminar flow for aircraft drag reduction requires maintaining minimum leading-edge contamination. Previously proposed insect contamination prevention methods have proved impractical due to cost, weight, or inconvenience. Past work has shown that insects will not adhere to water-wetted surfaces, but the large volumes of water required for protection rendered such a system impractical. The results of a flight experiment conducted by NASA to evaluate the performance of a porous leading-edge fluid discharge ice protection system operated as an insect contamination protections system are presented. In addition, these flights explored the environmental and atmospheric conditions most suitable for insect accumulation.

Croom, Cynthia C.↗