Engineering topics

Hlova, Ihor Z.

Publications and source records attributed to Hlova, Ihor Z..

9 records

DOE OSTI2024

Structural Studies of Alloyed and Nanoparticle Transition Metal Dichalcogenides by Selenium-77 Solid-State Nuclear Magnetic Resonance Spectroscopy

Layered transition metal dichalcogenides (TMDCs) such as MoS 2 , MoSe 2 , and WSe 2 are under intense investigation because they are atomically thin semiconductors with photophysical properties that can be tuned by changing their composition or morphology. Mechanochemical processing has been proposed as a method to obtain alloyed TMDCs in the series Mo 1–x W x S y Se 2–y (x = 0–1; y = 0–2). However, elucidating the chemical transformations occurring at the atomic scale following mechanochemical processing can be challenging because the products are often amorphous or microcrystalline. To address this challenge, we probe TMDC mixing and alloying by using a combination of powder X-ray diffraction, Raman spectroscopy, diffuse reflectance spectroscopy, 77 Se solid-state nuclear magnetic resonance (SSNMR) spectroscopy, and planewave density functional theory (DFT) calculations. The nature of the milling material and reaction atmosphere are shown to be essential factors in limiting the formation of undesired oxide byproducts. We demonstrate acquisition of 77 Se SSNMR spectra using different combinations of Carr-Purcell Meiboom-Gill acquisition (CPMG) pulse sequences, magic angle spinning (MAS), and MAS dynamic nuclear polarization. Further, the combination of SSNMR with the other characterization methods clearly demonstrates that high energy impact ball milling induces molecular level alloying of Mo, W and chalcogen atoms in the family Mo 1–x W x S y Se 2–y . Gauge including projector augmented wave DFT calculations yield accurate 77 Se chemical shift (CS) tensor components. 77 Se SSNMR spectroscopy was also applied to study the structure of WSe 2 nanocrystals intercalated with ethylenediamine. The intercalated WSe 2 nanocrystals exhibit a more positive isotropic 77 Se CS as compared to bulk WSe 2 , however, the 77 Se CS anisotropy is the same, confirming the WSe 2 layers have a similar structure as in their bulk counterparts.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Aspects of Spodumene Lithium Extraction Techniques

Lithium (Li), a leading cathode material in rechargeable Li-ion batteries, is vital to modern energy storage technology, establishing it as one of the most impactful and strategical elements. Given the surge in the electric car market, it is crucial to improve lithium recovery from its rich mineral deposits using the most effective extraction technique. In recent years, both industry and academia have shown significant interest in Li recovery from various Li-bearing minerals. Of these, only extraction from spodumene has established a reliable industrial production of Li salts. The current approaches for cracking of the naturally occurring, stable α-spodumene structure into a more open structure—β-spodumene—involve the so-called decrepitation process that takes place at extreme temperatures of ~1100 °C. This conversion is necessary, as β-spodumene is more susceptible to chemical attacks facilitating Li extraction. In the last several decades, many techniques have been demonstrated and patented to process hard-rock mineral spodumene. The objective of this review is to present a thorough analysis of significant findings and the enhancement of process flowsheets over time that can be useful for both research endeavors and industrial process improvements. The review focuses on the following techniques: acid methods, alkali methods, carbonate roasting/autoclaving methods, sulfuric acid roasting/autoclaving methods, chlorinating methods, and mechanochemical activation. Recently, microwaves (MWs), as an energy source, have been employed to transform α-spodumene into β-spodumene. Considering its energy-efficient and short-duration aspects, the review discusses the interaction mechanism of MWs with solids, MW-assisted decrepitation, and Li extraction efficiencies. Finally, the merits and/or disadvantages, challenges, and prospects of the processes are summarized.

25 ENERGY STORAGE↗

DOE OSTI2024

Structural Distortions and Short‐Range Magnetism in a Honeycomb Iridate Cu 3 ZnIr 2 O 6

Layered honeycomb iridates receive significant attention in the materials chemistry and physics fields due to the relevance of their crystal structures to the Kitaev model of a quantum spin liquid (QSL). In quest of liquid‐like magnetic ground state signatures, first‐generation alkali metal iridates A 2 IrO 3 ≡ A 3 [AIr 2 ]O 6 (A = Li, Na) and second‐generation iridates T 3 [AIr 2 ]O 6 ( T = Cu, Ag, H) are developed. T 3 [AIr 2 ]O 6 is synthesized from A 3 [AIr 2 ]O 6 via metathesis reactions replacing alkali ions located between honeycomb layers. Herein, the next level of chemical and structural complexity is introduced by synthesizing the honeycomb iridate, Cu 3 ZnIr 2 O 6 , in which alkali ions between and within the honeycomb layers are both selectively exchanged with two different transition metals. Analysis of powder X‐Ray diffraction data reveals corrugation of the honeycomb layers in Cu 3 ZnIr 2 O 6 that hinders complete magnetic frustration and results in a spin glass behavior observed from magnetization and specific heat data. Thus, Cu 3 ZnIr 2 O 6 represents yet another model, which broadens understanding of intricate relationships between intralayer distortions and magnetism of prospective Kitaev QSL compounds.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Formation of Stable Radicals by Mechanochemistry and Their Application for Magic Angle Spinning Dynamic Nuclear Polarization Solid-State NMR Spectroscopy

High-field magic angle spinning (MAS) dynamic nuclear polarization (DNP) solid-state nuclear magnetic resonance (SSNMR) is becoming a common technique for improving the sensitivity in NMR by the hyperpolarization of nuclear spins. Recently, we have shown that gamma irradiation is capable of creating long-lived free radicals that are amenable to MAS DNP in quartz and a variety of organic solids. Here, we demonstrate that mechanochemical ball milling is able to generate millimolar concentrations of stable radical species in diverse materials, such as polystyrene, cellulose, borosilicate glass, and fused quartz. High-field electron paramagnetic resonance (EPR) was used to obtain further insight into the nature of the radicals formed in ball milled quartz and borosilicate glass. Finally, we further show that radicals generated in quartz by ball milling can be used for solid-effect DNP. We obtained 29 Si DNP enhancements of approximately 114 and 33 at 110 K and room temperature, respectively, from a sample of ball milled quartz.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Enhancement of hard magnetism and chemical order of synthetic L 1 0 -FeNi

An ordered tetragonal L 1 0 -FeNi, also known as meteoritic mineral tetrataenite – a promising rare-earth-free hard-magnetic compound – has been synthesized starting from a mechanochemically-activated disordered cubic A1-FeNi via formation of a chemically-ordered FeNiN intermediate and its subsequent denitrogenation and further purification of the product. The nature of a process control agent employed during the mechanochemical activation of A1-FeNi and ammonia flow velocity during the synthesis of the intermediate are two of the main factors controlling the nitrogenation. Denitrogenation with hydrogen at elevated pressures and at temperatures substantially below the order-disorder L 1 0 -FeNi → A1-FeNi transition preserves the chemical order established in the intermediate nitride. Further, post-synthesis refinement of the L 1 0 -FeNi product includes the removal of residual nitrides with a dilute acid to further improve hard-magnetic properties of the material. The L 1 0 -FeNi powders synthesized using this method exhibit a coercivity as high as 2.3 kOe and a maximum energy product reaching 6 MGOe – the highest values ever reported for a synthetic tetrataenite.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Unusual first-order magnetic phase transition and large magnetocaloric effect in Nd 2 In

A large magnetocaloric effect with its maximum near the boiling point of natural gas occurs in a rare-earth intermetallic compound Nd 2 In. While behaviors of physical properties indicate that paramagnetic-ferromagnetic transformation supporting the large magnetocaloric effect is firstorder in nature, temperature dependent crystallographic study reveals no changes in lattice symmetry and lack of discontinuities either in phase volume or lattice parameters. In this work we discuss how the borderline first-order nature of phase transformation in Nd 2 In is markedly different from conventional firstorder magnetic transitions occurring in other members of the family – isostructural Pr 2 In and non-isostructural Eu 2 In.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Incommensurate transition-metal dichalcogenides via mechanochemical reshuffling of binary precursors

A new family of heterostructured transition-metal dichalcogenides (TMDCs) with incommensurate (“misfit”) spatial arrangements of well-defined layers was prepared from structurally dissimilar single-phase 2H-MoS 2 and 1T-HfS 2 materials. The experimentally observed heterostructuring is energetically favorable over the formation of homogeneous multi-principle element dichalcogenides observed in related dichalcogenide systems of Mo, W, and Ta. The resulting three-dimensional (3D) heterostructures show semiconducting behavior with an indirect band gap around 1 eV, agreeing with values predicted from density functional theory. Results of this joint experimental and theoretical study open new avenues for generating unexplored metal-dichalcogenide heteroassemblies with incommensurate structures and tunable physical properties.

36 MATERIALS SCIENCE↗

DOE OSTI2021

A New Complex Borohydride LiAl(BH4)2Cl2

A new mixed alkali metal–aluminum borohydride LiAl(BH4)2Cl2 has been prepared via mechanochemical synthesis from the 2LiBH4–AlCl3 mixture. Structural characterization, performed using a combination of X-ray powder diffraction and solid-state NMR methods, indicates that the LiAl(BH4)2Cl2 phase adopts a unique 3D framework and crystallizes in an orthorhombic structure with the space group C2221, a = 11.6709(6) Å, b = 8.4718(4) Å, c = 7.5114(3) Å. The material shows excellent dehydrogenation characteristics, where hydrogen evolution starts at Tons = 70 °C, releasing approximately 2 wt.% of nearly pure (99.8 vol.%) hydrogen and a very small amount (~0.2 vol.%) of diborane. When compared to halide-free mixed alkali metal–aluminum borohydrides, the presence of Al‒Cl bonding in the LiAl(BH4)2Cl2 structure likely prevents the formation of Al(BH4)3 upon decomposition, thus suppressing the formation of diborane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Depolymerization of polystyrene under ambient conditions

Depolymerization of the addition polymer polystyrene to monomeric styrene is facilitated by mechanochemical processing at room temperature under ambient atmosphere. The reaction occurs in metal-based milling media in concert with scission of macromolecular chains that generates carbon-centered free-radicals detectable by EPR spectroscopy, although the processing is performed in air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗