Engineering Papers⌕ Search

Engineering topics

Higa, Kenneth

Publications and source records attributed to Higa, Kenneth.

At least 19 records

Zinc dendrite removal in a nickel-zinc battery with flow-through electrodes

The development and deployment of inexpensive energy storage technologies is critical to realizing a clean energy grid. Batteries are being used in this role, but there remains a need for research on systems that are designed specifically for stationary energy storage, with a focus on lowering the overall cost rather than prioritizing the system energy density, specific energy, and power output. Here, we report the development of ultra-thick (1 cm thick) electrodes with engineered flow channels and explore the variables determining how thick these electrodes can feasibly be. Our proof of concept cell, utilizing the alkaline Ni-Zn chemistry, shows stable cycling over the initial 60 cycles but still suffers from the common Zn dendrite growth at the anode. To extend the life of these systems we report our novel methodology to completely remove Zn dendrites by exploiting the flow-through nature of our electrode architecture.

Collins-Wildman, Daniel L↗

Viscosity Analysis of Battery Electrode Slurry

We report the effects of component ratios and mixing time on electrode slurry viscosity. Three component quantities were varied: active material (graphite), conductive material (carbon black), and polymer binder (carboxymethyl cellulose, CMC). The slurries demonstrated shear-thinning behavior, and suspension properties stabilized after a relatively short mixing duration. However, micrographs of the slurries suggested their internal structures did not stabilize after the same mixing time. Increasing the content of polymer binder CMC caused the greatest viscosity increase compared to that of carbon black and graphite.

25 ENERGY STORAGE↗

REST Interface Generator (RESTInG) v0.1

From a single data description file, this package generates a simple but complete RESTful web interface to a relational database, in the form of containers that run in a Docker environment. This initial version produces containers that are intended for use on the NERSC Spin platform. It was developed as a foundation for the smart catalog created for LDRD FY20 ACTS: Accelerating COVID-19 Testing with Screening.

Higa, Kenneth↗

PyGDH: Python Grid Discretization Helper

Mathematical models expressed in the form of discretized equations play an important role inmany scientific disciplines. In our experience, few domain scientists have sufficient backgroundin numerical computing (or the time required to acquire such a background) to use manyflexible and powerful but complex open source packages, such as FEniCS (Alnæs et al., 2015)and OpenFOAM (The OpenFOAM Foundation Ltd, n.d.). Many user-friendly open sourcepackages, such as FiPy (J. E. Guyer & Warren, 2009), and many commercial packages, suchas COMSOL Multiphysics (COMSOL AB, n.d.) and Simcenter STAR-CCM+ (Siemens DigitalIndustries Software, n.d.), provide limited flexibility in the equations that users can express.Additionally, the use of commercial packages, which by nature do not perform calculationstransparently, can hinder reproducibility, which is vital to the scientific process. PyGDH(“pigged”) is a Python 2 / Python 3 (Python Software Foundation, 1991–2020) package thatis meant to be accessible to scientists who might not be specialists in scientific computing,while approaching the level of flexibility associated with writing dedicated programs tailoredto solving specific problems. The PyGDH User’s Guide provides detailed instructions forcreating numerical models, including a brief introduction to necessary command line andPython (Python Software Foundation, 1991–2020) skills, and discussions of discretization andvalidation. Note that PyGDH emphasizes flexibility and simplicity over performance, and wasnot designed for high-performance applications or models describing complex spatial domains.

97 MATHEMATICS AND COMPUTING↗

LIBlib v0.1.0

LIBlib is a Python 2 / Python 3 software package (library), built on top of the PyGDH package, for relatively simple and highly flexible implementation of macrohomogenous lithium ion battery models.

Higa, Kenneth↗

The Role of Local Inhomogeneities on Dendrite Growth in LLZO-Based Solid Electrolytes

The majority of the ceramic solid electrolytes (LLZO, LATP) demonstrate polycrystalline grain/grain-boundary (G/GB) microstructure. Higher lithium (Li) concentration and lower mechanical stiffness result in current focusing at the GBs. Growth of Li dendrites through local inhomogeneities and subsequent short circuit of the cell is a major concern. Recent studies have revealed that bulk Li metal is a viscoplastic material that has low (~0.3 MPa) and high (~1.0 MPa) yield strength during deformation at smaller and larger rates of strain, respectively. It has been argued that during deposition at smaller current densities, due to its lower yield strength, Li metal should demonstrate plastic flow against stiff ceramic electrolytes, and Li dendrites will be prevented from penetrating through solid electrolytes. In this manuscript, a multiscale modeling framework has been developed for predicting properties of GBs and the bulk of ceramic electrolytes using atomistic calculations for input to mesoscale models. Using the parameters obtained from the atomistic simulations, the mesoscale model reveals that, given enough time, even at low charge rates, lithium dendrites can grow through the GBs of LLZO. The present multiscale model results also provide information regarding the dendrite growth velocity through LLZO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical Stress Induced Current Focusing and Fracture in Grain Boundaries

Solid state electrolytes (SSEs) with garnet structures and chemical composition Li 7 La 3 Zr 2 O12 (LLZO) are being actively considered as the electrolyte for next-generation lithium ion batteries. These LLZO-based ceramic SSEs are polycrystalline and possess distinct grain-interior/grain-boundary (GI/GB) microstructure. Lithium dendrite growth through these GI and GB domains is considered to be the largest bottleneck preventing their successful implementation. Dendrite growth has been observed to occur predominantly within the GB regions. While this would be expected if the GB regions were more ionically conductive than the GI regions, there is significant disagreement over the relative conductivities of these two regions. The present work demonstrates that dendrite growth can occur preferentially in the GB regions even when the GI regions have higher ionic conductivity. Electrochemical potential changes induced by mechanical stress within the GI and GB domains reveals that the magnitude of effective stress induced current density within the elastically softer GB is larger than in the mechanically stiffer GI, which leads to enhanced lithium deposition in GB and subsequent dendrite growth. Finally, the present work additionally examines the impact of applied current density and grain size on current focusing in the GB regions, and also finds that SSE fractures initiate from the GB regions.

25 ENERGY STORAGE↗

Impact of External Pressure and Electrolyte Transport Properties on Lithium Dendrite Growth

Practical implementation of metal anodes in commercial lithium-ion batteries has been limited by the growth of dendritic protrusions, which can cause short-circuits and adversely affect battery safety. The impacts of the physical (such as external pressure and electrolyte shear modulus) and electrochemical (for example, conductivity, diffusivity and transference number) properties of a solid electrolyte on the propensity of lithium dendrite growth are investigated here. It is found that over a range of conditions, there are critical pressures above which growth of lithium dendritic protrusions can be prevented. The magnitude of this critical pressure depends on the elastic modulus of the electrolyte. Plastic deformation of lithium at high pressure results in reduced protrusion growth, which helps in obtaining stable deposition. For the first time, phase maps have been developed based on mechanical and transport properties of electrolytes, indicating conditions under which stable deposition of lithium is possible during long-term operation. Suppression of dendrites by individually altering conductivity, or diffusivity, or transference number, or elastic modulus of the electrolyte appears to be a relatively difficult task. Finally, minor tailoring of the transference number and elastic modulus of present-day polymer electrolytes, in a combined fashion, can lead to dendrite-free deposition of lithium.

25 ENERGY STORAGE↗

Evaluating Transport Properties and Ionic Dissociation of LiPF 6 in Concentrated Electrolyte

The presence of lithium hexafluorophosphate (LiPF 6 ) ion pairs in carbonate-based electrolyte solutions is widely accepted in the field of battery electrolyte research and is expected to affect solution transport properties. No existing techniques are capable of directly quantifying salt dissociation in these solutions. Previous publications by others have provided estimates of dissociation degrees using dilute solution theory and pulsed field gradient nuclear magnetic resonance spectroscopy (PFG-NMR) measurements of self-diffusivity. However, the behavior of a concentrated electrolyte solution can deviate significantly from dilute solution theory predictions. This paper, for the first time, instead uses Onsager–Stefan–Maxwell concentrated solution theory and the generalized Darken relation with PFG-NMR measurements to quantify the degrees of dissociation in electrolyte solutions (LiPF 6 in ethylene carbonate/diethyl carbonate, 1:1 by weight). At LiPF 6 concentrations ranging from 0.1 M to 1.5 M, the salt dissociation degree is found to range from 61% to 37%. Finally, transport properties are then calculated through concentrated solution theory with corrections for these significant levels of ion pairing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Battery Performance Due to Intercalation Driven Volume Change in Porous Electrodes

Simulations are presented that result from incorporating dimensional and porosity changes in porous electrodes caused by volume changes in the active material during intercalation into a detailed lithium-ion battery model. Porosity and dimensional changes in an electrode can significantly affect the resistance of the battery during cycling, which in turn alters the reaction distributions in the porous electrodes. In addition, volume changes generate stresses in the electrode which can lead to premature failure of the battery. Material conservation equations are coupled with the mechanical properties of porous electrodes to link dimensional and porosity changes to stresses and the resulting resistances that occur during the intercalation processes. Through the use of porous rock mechanics, porosity and strain gradients can be predicted based on state of discharge and discharge rate. Several different battery casings and discharge rates are examined and operating curves are predicted.

25 ENERGY STORAGE↗

Lithium dendrite growth mechanisms in polymer electrolytes and prevention strategies

Future lithium-ion batteries must use lithium metal anodes to fulfill the demands of high energy density applications with the potential to enable affordable electric cars with 350-mile range. However, dendrite growth during charging prevents the commercialization of this technology. It has been demonstrated that the presence of a compressive mechanical stress field around a dendritic protrusion prevents growth. Several techniques based on this concept, such as protective layers, externally applied pressure and solid electrolytes have been investigated by other researchers. Because of the low coulombic efficiencies associated with the stiff protective layers and high-pressure conditions, implementation of these techniques in commercial cells is complicated. Polymer-based solid electrolytes demonstrate better efficiency and capacity retention capabilities. However, dendrite growth is still possible in polymer electrolytes at higher current densities. The simulations described in this article provide guidance on the conditions under which dendrite growth is possible in polymer cells and targets for material properties needed for dendrite prevention. Increasing the elastic modulus of the electrolyte prevents the growth of dendritic protrusions in two ways: (i) higher compressive mechanical stress leads to reduced exchange current density at the protrusion peak compared to the valley, and (ii) plastic deformation of lithium metal results in reduction of the height of the dendritic protrusion. A phase map is constructed, showing the range of operation (applied current) and design (electrolyte elastic modulus) parameters that corresponds to stable lithium deposition. In conclusion, it is found that increasing the yield strength of the polymer electrolyte plays a significant role in preventing dendrite growth in lithium metal anodes, providing a new avenue for further exploration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparing Macroscale and Microscale Simulations of Porous Battery Electrodes

This article describes a vertically-integrated exploration of NMC electrode rate limitations, combining experiments with corresponding macroscale (macro-homogeneous) and microscale models. Parameters common to both models were obtained from experiments or based on published results. Positive electrode tortuosity was the sole fitting parameter used in the macroscale model, while the microscale model used no fitting parameters, instead relying on microstructural domains generated from X-ray microtomography of pristine electrode material held under compression while immersed in electrolyte solution (additionally providing novel observations of electrode wetting). Macroscale simulations showed that the capacity decrease observed at higher rates resulted primarily from solution-phase diffusion resistance. This ability to provide such qualitative insights at low computational costs is a strength of macroscale models, made possible by neglecting electrode spatial details. To explore the consequences of such simplification, the corresponding, computationally-expensive microscale model was constructed. This was found to have limitations preventing quantitatively accurate predictions, for reasons that are discussed in the hope of guiding future work. Nevertheless, the microscale simulation results complement those of the macroscale model by providing a reality-check based on microstructural information; in particular, this novel comparison of the two approaches suggests a reexamination of salt diffusivity measurements.

25 ENERGY STORAGE↗

Electrode Slurry Particle Density Mapping Using X-ray Radiography

The internal structure of a porous electrode strongly influences battery performance. Understanding the dynamics of electrode slurry drying could aid in engineering electrodes with desired properties. For instance, one might monitor the dynamic, spatially-varying thickness near the edge of a slurry coating, as it should lead to non-uniform thickness of the dried film. This work examines the dynamic behavior of drying slurry drops consisting of SiO x and carbon black particles in a solution of carboxymethylcellulose and deionized water, as an experimental model of drying behavior near the edge of a slurry coating. An X-ray radiography-based procedure is developed to calculate the evolving spatial distribution of active material particles from images of the drying slurry drops. To the authors’ knowledge, this study is the first to use radiography to investigate battery slurry drying, as well as the first to determine particle distributions from radiography images of drying suspensions. The dynamic results are consistent with tomography reconstructions of the static, fully-dried films. It is found that active material particles can rapidly become non-uniformly distributed within the drops. Heating can promote distribution uniformity, but seemingly must be applied very soon after slurry deposition. Higher slurry viscosity is found to strongly restrain particle redistribution.

25 ENERGY STORAGE↗

Simulation of local ion transport in lamellar block copolymer electrolytes based on electron micrographs

A method is presented in this paper to relate local morphology and ionic conductivity in a solid, lamellar block copolymer electrolyte for lithium batteries, by simulating conductivity through transmission electron micrographs. The electrolyte consists of polystyrene-block-poly(ethylene oxide) mixed with lithium bis(trifluoromethanesulfonyl) imide salt (SEO/LiTFSI), where the polystyrene phase is structural phase and the poly(ethylene oxide)/LiTFSI phase is ionically conductive. The electric potential distribution is simulated in binarized micrographs by solving the Laplace equation with constant potential boundary conditions. A morphology factor, f, is reported for each image by calculating the effective conductivity relative to a homogenous conductor. Images from two samples are examined, one annealed with large lamellar grains and one unannealed with small grains. The average value off is 0.45 ± 0.04 for the annealed sample, and 0.37 ± 0.03 for the unannealed sample, both close to the value predicted by effective medium theory, 1/2. Simulated conductivities are compared to published experimental conductivities. The value of f Unannealed /f Annealed is 0.82 for simulations and 6.2 for experiments. Simulation results correspond well to predictions by effective medium theory but do not explain the experimental measurements. Finally, observation of nanoscale morphology over length scales greater than the size of the micrographs (~1 μm) may be required to explain the experimental results.

36 MATERIALS SCIENCE↗

Effect of Initial State of Lithium on the Propensity for Dendrite Formation: A Theoretical Study

Mechanical constraints have been widely used experimentally to prevent the growth of dendrites within lithium metal. The only article known to the authors that tries to theoretically understand how mechanical forces prevent dendrite growth was published by Monroe and Newman [J. Electrochem. Soc., 150 (10) A1377 (2005)]. Based on the assumption that surface tension prevents the growth of interfacial roughness, Monroe and Newman considered pre-stressed conditions of the lithium electrodes. This scenario indicates that prevention of dendrite growth by mechanical means is only possible by using electrolytes with shear modulus at least two times larger than that of lithium metal. Here, a different scenario of relaxed lithium metal (without any pre-existing surface stresses) has been considered in the present analysis. Deposition of lithium due to electrochemical reaction at the lithium/electrolyte interface induces compressive stress at the electrode, the electrolyte, and the newly deposited lithium metal. Present simulations indicate that during operation at low current densities, the scenario of relaxed lithium leads to no dendrites. Rather, the present study points to the importance of including the effect of current distribution to accurately capture the mechanical forces needed to prevent dendrite growth.

25 ENERGY STORAGE↗

Influence of Electrolyte Modulus on the Local Current Density at a Dendrite Tip on a Lithium Metal Electrode

Understanding and controlling the electrochemical deposition of lithium is imperative for the safe use of rechargeable batteries with a lithium metal anode. Solid block copolymer electrolyte membranes are known to enhance the stability of lithium metal anodes by mechanically suppressing the formation of lithium protrusions during battery charging. Time-resolved hard X-ray microtomography was used to monitor the internal structure of a symmetric lithium-polymer cell during galvanostatic polarization. The microtomography images were used to determine the local rate of lithium deposition, i.e. local current density, in the vicinity of a lithium globule growing through the electrolyte. Measurements of electrolyte displacement enabled estimation of local stresses in the electrolyte. At early times, the current density was maximized at the globule tip, as expected from simple current distribution arguments. At later times, the current density was maximized at the globule perimeter. We show that this phenomenon is related to the local stress fields that arise as the electrolyte is deformed. The local current density, normalized for the radius of curvature, decreases with increasing compressive stresses at the lithium-polymer interface. To our knowledge, our study provides the first direct measurement showing the influence of local mechanical stresses on the deposition kinetics at lithium metal electrodes.

25 ENERGY STORAGE↗