Engineering Papers⌕ Search

Engineering topics

Hickey, D. H.

Publications and source records attributed to Hickey, D. H..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Correlation of low speed wind tunnel and flight test data for V/STOL aircraft

The availability of wind tunnel test data for correlation purposes of the same V/STOL aircraft tested in flight is very limited. This is due in a large part to size limitations of wind tunnels and the number of wind tunnels available for testing of full-scale aircraft. Wind tunnel tests are described for two research aircraft - the XV-5B fan-in-wing aircraft and the YOV-10 RCF (rotating cylinder flap) aircraft - in the NASA Ames 40- by 80-foot wind tunnel. The tests were conducted specifically to provide for correlation between wind tunnel and in-flight aerodynamics and noise test data. Correlation between aerodynamic and noise data are presented and testing techniques that are related to the accuracy of the data, or that might affect the correlations, are discussed. The correlation of noise measurements made with a J-85 engine mounted on a F-106 aircraft during low altitude flyovers with the same J-85 engine mounted on a model and tested in the Ames 40- by 80-foot wind tunnel are also reported.

Cook, W. L.↗
NASA NTRS1976

The rationale and design features for the 40 by 80/80 by 120 foot wind tunnel

A substantial increase in the test capability of full scale wind tunnels is considered. In order to determine the most cost effective means for providing this desired increase in test capability, a series of design studies were conducted of various new facilities as well as of major modifications to the existing 40- by 80-foot wind tunnel. The most effective trade between test capability and facility cost was provided by repowering the existing 40 by 80 foot wind tunnel to increase the maximum speed from 200 knots to 300 knots and by the addition of a new 80- by 120-foot test section having a 110 knot maximum speed. The design of the facility is described with special emphasis on the unique features, such as the drive system which absorbs nearly four times the power without an increase in noise, and the large flow diversion devices required to interface the two test sections to a single drive.

Mort, K. W.↗
NASA NTRS1975

Correlation of low speed wind tunnel and flight test data for V/STOL aircraft

The XV-5B fan-in-wing aircraft and the Y0V-10 RCF rotating cylinder flap aircraft were subjected to wind tunnel tests. These tests were conducted specifically to provide for correlation between wind tunnel and inflight aerodynamics and noise test data. Correlation between aerodynamic and noise data are presented and testing techniques that are related to the accuracy of the data, or that might affect the correlations, are discussed.

Cook, W. L.↗
NASA NTRS1974

Aerodynamics of jet flap and rotating cylinder flap STOL concepts

The aerodynamic effectiveness of various propulsive lift concepts to provide for the low speed performance and control required for short takeoff and landing aircraft is discussed. The importance of the interrelationship between the propulsion system and aerodynamic components of the aircraft is stressed. The relative effectiveness of different lift concepts was evaluated through static and wind tunnel tests of various aerodynamic models and propulsion components, simulations of aircraft, and in some cases, flight testing of research aircraft incorporating the concepts under study. Results of large scale tests of lift augmentation devices are presented. The results of flight tests of STOL research aircraft with augmented jet flaps and rotating cylinder flaps are presented to show the steeper approach flight paths at low forward speeds.

Cook, W. L.↗
NASA NTRS1973

Aspects of large-scale, subsonic, wind-tunnel design for propulsion noise research

The case for full-scale acoustic testing of propulsion systems at flight conditions and the use of wind tunnels for this work are discussed. The problems associated with measuring noise in wind tunnels are discussed, and wind-tunnel design requirements to provide a useful facility for noise research are established. Full-scale subsonic wind-tunnel designs that meet the requirements are described, and it is shown that state-of-art acoustics technology must be used in the drive-fan design to minimize background noise. If this is successfully done, acoustic treatment in the drive system area may be avoided.

Hickey, D. H.↗
NASA NTRS1972

Full scale subsonic wind tunnel requirements and design studies

The justification and requirements are summarized for a large subsonic wind tunnel capable of testing full-scale aircraft, rotor systems, and advanced V/STOL aircraft propulsion systems. The design considerations and constraints for such a facility are reviewed, and the trades between facility test capability and costs are discussed. The design studies showed that the structural cost of this facility is the most important cost factor. For this reason (and other considerations such as requirements for engine exhaust gas purging) an open-return wind tunnel having two test sections was selected. The major technical problem in the design of an open-return wind tunnel is maintaining good test section flow quality in the presence of external winds. This problem has been studied extensively, and inlet and exhaust systems which provide satisfactory attenuation of the effects of external winds on test section flow quality were developed.

Kelly, M. W.↗
NASA NTRS1971

V/STOL propulsion

Propulsion technology for STOL and V/STOL commercial aircraft

Diedrich, J. H.↗
NASA NTRS1963

CHARACTERISTICS OF LIFTING-FAN V/STOL AIRCRAFT

Wind-tunnel tests of full scale practical configuration of lifting fan v/stol aircraft show transition pitching moments comparable to conventional aircraft, and that lift increases with greater forward speed

LIFT FAN↗