Engineering Papers⌕ Search

Engineering topics

Henzl, Vlad

Publications and source records attributed to Henzl, Vlad.

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Advanced Algorithms for Scrutiny of Mandatory State Reports Declarations to the IAEA (Final Project Report)

In compliance with their Comprehensive Safeguards Agreements, based on INFCIRC/153 (corrected) (International Atomic Energy Agency, 1972), States Party to the Treaty on the NonProliferation of Nuclear Weapons (NPT) are obligated to declare to the International Atomic Energy Agency (IAEA) all changes in their nuclear material inventory as well as movement of the material across boundaries of IAEA recognized material balance areas (MBA), inventories and nuclear material balances. This project addresses capabilities to detect irregularities in State reports, thus ensuring their accuracy and completeness, and in the broader context, States’ compliance with safeguards obligations of the NPT. A recent study (Henzl et al., 2022) (lead by this project’s PI) demonstrated how analysis of dynamic correlations in nuclear material movement within the entire fuel cycle of a State (viewed as a single system) can reveal variances consistent with and indicative of “irregular” activities. Expanding on this concept, novel ways to analyze State declarations themselves—again, for the State as a whole entity—will help the IAEA draw accurate safeguards conclusions and trust the validity and authenticity of Stategenerated declaration reports. Introducing new declaration analyses capabilities explored in this project will help to provide credible assurance of both the non-diversion of nuclear material from declared activities and of the absence of undeclared nuclear material and activities in the State in general.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

High efficiency active environmental sampling of chemical traces

A method of sample collection includes collecting an analyte from a sampling surface using a rapidly curable liquid gel comprising one or more metal particles; co-aggregating the one or more metal particles from the rapidly curable liquid gel and the analyte from the sampling surface; and rapidly curing the rapidly curable liquid gel. The composition and sample preparation conditions may facilitate improved collection efficiency of analytes during environmental and forensic evidence sampling. In addition, the composition and sample preparation conditions may facilitate enhanced detection and identification of the analyte using e.g., Surface Enhanced Raman Spectrometry (SERS).

Junghans, Ann↗
DOE OSTI2023

Characterization of Impure Plutonium Oxide Neutron Calibration Standards through Evaluation by Neutron Multiplicity Equations

Plutonium oxide calibration standards STD4C, STD6C and STD8C have been historically used, and are currently the only MT52 standards in use, for calibration and measurement control program of Passive/Active Neutron Coincidence Counter known as PAN1 at PF-4. In this paper, previously measured high-statistics data are used in conjunction with neutron multiplicity equations to determine multiplication M and α parameter of these standards as the explicit knowledge of these parameters may allow quantification of precision and bias of accountability measurements of different material types and matrices of items.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Advanced Algorithms for Scrutiny of Mandatory State Reports Declarations to the IAEA (Final Project Report)

The International Atomic Energy Agency (IAEA, or Agency) has an interest in applying machine learning to safeguards problems. However, the lack of machine training data for outside researchers is a significant impediment for progress in including advanced algorithms in safeguards practices. Information about a State’s inventory and movements of nuclear material is highly sensitive, both from a commercial perspective and from a security perspective. States (and commercial entities) do not freely divulge this information, and the IAEA–which receives detailed information from States as accounting reports–considers all information concerning nuclear materials location and composition to be Safeguards Confidential. Even within the Agency, information marked as safeguards confidential can be accessed only on a direct need-to-know basis by those who analyze and summarize the information for that particular State.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Neutron Coincidence Measurements of Uranium-233 Oxide

Renewed international interest in thorium-fueled advanced reactors has challenged the safeguards community to address future proliferation concerns. Thorium-based technology presents many benefits but does not eliminate the proliferation risks associated with producing and processing fissile material. A byproduct of thorium-fueled reactors is uranium-233, which is classified as a direct-use material. As a result, the development of new or improved methods to characterize and measure materials containing 233U must mirror the pace of development of reactors and facilities that produce such material. Research is underway to assess, develop, and test approaches for safeguarding nuclear materials within the thorium fuel cycle. Neutron signatures from the nondestructive assay (NDA) of materials containing 233U are being quantified to inform the potential characterization of these materials. Using a traditional neutron coincidence counter and a series of well-documented 233U oxide samples, initial measurements have been made to assess the feasibility of 233U characterization and discrimination from other uranium isotopes, primarily 235U, using a combination of measurement techniques and analysis methods. Data acquisition is performed in list mode, allowing for a variety of analyses to be performed on the raw data that is not available using traditional shift register technology. Measurements were performed in passive and active configurations to quantify the strength of signal and to validate simulations in support of this work. This paper presents and discusses the results of the initial measurements of 233U oxide performed at Oak Ridge National Laboratory.

Lockhart, Madeline↗
DOE OSTI2022

SuiteGoo [Slides]

SuiteGoo is a liquid product used to detect "undetectable" material traces. It is used when you need to improve detection limits, anywhere where cotton swiping is used, and anywhere where cotton swiping fails. It is also used by law enforcement to find DNA from fingerprints, used by health care to detect the presence of viruses and bacteria, used by emergency response to detect explosive traces, and used by environmental management to detect pollutant traces.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Improved evaluation of safeguards parameters from spent fuel measurements with the Differential Die-Away (DDA) instrument

The Differential Die-Away (DDA) technique is a highly sensitive non-destructive assay method for characterizing and detecting the presence of fissile material within an item of interest. DDA utilizes a series of pulses from a neutron generator (NG) to actively interrogate an item of interest. The die-away time of the neutron population induced by this active interrogation and the integral of the total differential die-away signal can be used to characterize items such as nuclear waste drums and spent nuclear fuel assemblies. In this work, Los Alamos National Laboratory (LANL) conceptualized, designed, and fabricated a DDA instrument that was deployed for field test measurements at the Central Interim Storage Facility for Spent Nuclear Fuel (Clab) in Oskarshamn, Sweden. The instrument performed multiple static measurements at fixed locations and dynamic axial scans of 15 pressurized water reactor (PWR) and 10 boiling water reactor (BWR) spent fuel assemblies, collecting both passive and active measurement data. The static assays of the assemblies measured the differential die-away signal, die-away time, and total passive neutron emission rate to create calibration curves for the evaluation of assembly multiplication, burnup, initial enrichment, effective fissile mass, and total elemental plutonium mass. Each calibration curve was optimized by minimizing the relative root mean square error (RRMSE) of assembly assay results compared to declared assembly parameters. The same quantities were also measured with the axial scans, and the resulting data were applied in two ways: (1) in the creation of calibration curves to improve evaluation of the same safeguards parameters as static assays, and (2) for comparison to simulation. In most cases, across both PWR and BWR assemblies, axial scan data improved the estimation of the above parameters, quantified by decreasing the calibration curve RRMSE. These axial scan results demonstrate the ability of the DDA instrument and analysis method to characterize spent PWR and BWR fuel as well as, or better than, a static assay of the same assembly. Furthermore, the DDA instrument’s unique ability to obtain both active and passive data in a single, axial scan of an entire spent fuel assembly represents a more efficient and accurate way of assaying spent fuel for verification purposes. These results represent a significant advancement for characterizing spent nuclear fuel compared to current technologies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗