Engineering Papers⌕ Search

Engineering topics

Henderson, R A

Publications and source records attributed to Henderson, R A.

At least 19 records

The 235 U prompt fission neutron spectrum measured by the Chi-Nu project at LANSCE

The Chi-Nu experiment aims to accurately measure the prompt fission neutron spectrum for the major actinides. At the Los Alamos Neutron Science Center (LANSCE), fission can be induced with neutrons ranging from 0.7 MeV and above. Using a two arm time-of-flight (TOF) technique, the fission neutrons are measured in one of two arrays: a 22- 6 Li glass array for lower energies, or a 54-liquid scintillator array for outgoing energies of 0.5 MeV and greater. Presented here are the collaboration's preliminary efforts at measuring the 235 U PFNS.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Exploring simultaneous single and coincident gamma-ray measurements for U/Pu assay in safeguards

Using a broad range of gamma-ray uranium standards and two plutonium samples of known isotopic content, list mode gamma ray information from two Compton suppressed and one planar HPGe detectors were analyzed according to the time information of the signals. Interferences from Cs-137 were introduced. In this study, we extended singles measurements by exploring the potential of simultaneously using both singles and coincidence data for U/Pu assay. The main goals of this exploratory study are: 1) whether one will be able to use coincidence information in addition to the complicated 100-keV unfolding to obtain extra information of uranium and plutonium isotopic ratios, and 2) with higher energy interference gamma-rays from isotopes such as Cs-137, can the coincidence information help to provide the isotopic information. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrodeposition of Uranium and Plutonium on Thin Carbon and Titanium Substrates

Preparation of Pu and U targets on thin natural C (100 {micro}g/cm{sup 2}) and ti (2 and 3 {micro}m) substrates is described. The Actinide material of interest was first purified using ion exchange chromatography to remove any matrix contaminants or decay products present in the parent stock solution. The actinide solution was prepared in 0.05 M HNO{sub 3} with a final aliquot volume not exceeding 100 {micro}L for the deposition procedure. The electroplating cells were developed in-house and were primarily made of Teflon. The source material deposited ranged from 125 to 400 {micro}g/cm{sup 2}. It was determined that multiple layers of U and Pu were required to produce thicker targets on Ti. Plating efficiency was greatly affected by the cell volume, solution aliquot size, pre-treatment of the foils, solution mixing during palting, and the fit of the electrode contact with the target substrate. The final procedure used for deposition is described in detail.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗