Engineering Papers⌕ Search

Engineering topics

Henderson, D.

Publications and source records attributed to Henderson, D..

Multi-Sampling Ionization Chamber (MUSIC) for measurements of fusion reactions with radioactive beams

A detection technique for high-efficiency measurements of fusion reactions with low-intensity radioactive beams was developed. The technique is based on a Multi-Sampling Ionization Chamber (MUSIC) operating as an active target and detection system, where the ionization gas acts as both target and counting gas. In this way, we can sample an excitation function in an energy range determined by the gas pressure, without changing the beam energy. The detector provides internal normalization to the incident beam and drastically reduces the measuring time. In the first experiment we tested the performance of the technique by measuring the 10,13,15 C+ 12 C fusion reactions at energies around the Coulomb barrier.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

C+C Fusion Cross Sections Measurements for Nuclear Astrophysics

Total fusion cross section of carbon isotopes were obtained using the newly developed MUSIC detector. MUSIC is a highly efficient, active target-detector system designed to measure fusion excitation functions with radioactive beams. The present measurements are relevant for understanding x-ray superbursts. The results of the first MUSIC campaign as well as the astrophysical implications are presented in this work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bubble chambers for experiments in nuclear astrophysics

A bubble chamber has been developed to be used as an active target system for low energy nuclear astrophysics experiments. Adopting ideas from dark matter detection with superheated liquids, a detector system compatible with gamma-ray beams has been developed. This detector alleviates some of the limitations encountered in standard measurements of the minute cross sections of interest to stellar environments. While the astrophysically relevant nuclear reaction processes at hydrostatic burning temperatures are dominated by radiative captures, in this experimental scheme we measure the time reversed processes. Such photodisintegrations allow us to compute the radiative capture cross sections when transitions to excited states of the reaction products are negligible. Due to the transformation of phase space, the photodisintegration cross-sections are up to two orders of magnitude higher. The main advantage of the new target-detector system is a density several orders of magnitude higher than conventional gas targets. Also, the detector is virtually insensitive to the gamma-ray beam itself, thus allowing us to detect only the products of the nuclear reaction of interest. The development and the operation as well as the advantages and disadvantages of the bubble chamber are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Contact value relations and density functional theory for the electrical double layer

The recently developed contact-corrected density functional theory is applied to an electric double layer containing a valence and size symmetric electrolyte. The restricted primitive model is used to describe the electrolyte, and a non-polarisable, smooth, planar, uniformly charged hard surface is used to model the electrode. Comparison with Monte Carlo simulation results for this system shows that the theory satisfies the first contact value relation in line with the premise of the approach. Additionally, the theory is found to satisfy the semi-empirical second contact value relation quite closely. This is a welcome result, since no reference is made to this second relation nor is the relation used in the theoretical development. The second contact relation is closely related to the anomalous positive temperature derivative of the double layer capacitance at low temperature, low ion concentration, and low electrode charge, and indeed, the contact-corrected density functional theory predicts this effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of astrophysical thermonuclear rates with a bubble chamber: The {sup 12}C(αγ){sup 16}O reaction case

The {sup 12}C(αγ){sup 16}O reaction rate is considered one of the most important unknown parameters in the physics of structure and evolution of massive stars. While extensive experimental campaigns have been performed trying to improve the quality of the measurements, the rate still holds very large uncertainties. Here we discuss a new experimantal scheme to measure the cross section of this reaction with a bubble chamber and a bremsstrahlung beam. The main advantage of the technique is a gain in the luminosity of several orders of magnitude when compared to other ongoing experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Buffet Load Alleviation

High performance aircraft are, by their very nature, often required to undergo maneuvers involving high angles of attack. Under these conditions unsteady vortices emanating from the wing and the fuselage will impinge on the twin fins (required for directional stability) causing excessive buffet loads, in some circumstances, to be applied to the aircraft. These loads result in oscillatory stresses, which may cause significant amounts of fatigue damage. Active control is a possible solution to this important problem. A full-scale test was carried out on an F/A-18 fuselage and fins using piezoceramic actuators to control the vibrations. Buffet loads were simulated using very powerful electromagnetic shakers. The first phase of this test was concerned with the open loop system identification whereas the second stage involved implementing linear time invariant control laws. This paper looks at some of the problems encountered as well as the corresponding solutions and some results. It is expected that flight trials of a similar control system to alleviate buffet will occur as early as 2001.

Ryall, T. G.↗

Momentum Transfer Studies and Studies of Linear and Nonlinear Optical Properties of Metal Colloids and Semiconductor Quantum Dots

Phase 1 of this work involved design work on a momentum transfer device. The progress on design and testing will be presented. Phase 2 involved the systematic study of the MPD thruster for dual uses. Though it was designed as a thruster for space vehicles, the characteristics of the plasma make it an excellent candidate for industrial applications. This project sought to characterize the system for use in materials processing and characterization. The surface modification on ZnCdTe, CdTe, and ZnTe will be presented. Phase 3 involved metal colloids and semiconductor quantum dots. One aspect of this project involves a collaborative effort with the Solid State Division of ORNL. The thrust behind this research is to develop ion implantation for synthesizing novel materials (quantum dots wires and wells, and metal colloids) for applications in all optical switching devices, up conversion, and the synthesis of novel refractory materials. The ions of interest are Au, Ag, Cd, Se, In, P, Sb, Ga, and As. The specific materials of interest are: CdSe, CdTe, InAs, GaAs, InP, GaP, InSb, GaSb, and InGaAs. A second aspect of this research program involves using porous glass (25-200 A) for fabricating materials of finite size. The results of some of this work will also be reported.

Collins, W. E.↗

Adjustable Work Station for Video Displays and Keyboards

Work station for video displays and keyboards adaptable to operational and anthropometric requirements of individual operators. Visual displays placed beyond keyboard and in line with inclination of keyboard to minimize operator's head movement. In addition, station arranged so operator's eyes and hands focus onto three primary control and display areas. Quickens operating response and decreases chance of error, since input devices and feedback to operator are collocated.

Roe, F.↗