Engineering topics

Hema Chandrasekaran

Publications and source records attributed to Hema Chandrasekaran.

5 records

NASA NTRS2010

Kepler Instrument Performance: An In-Flight Update

The Kepler Mission is designed to detect the 80 parts per million (ppm) signal from an Earth-Sun equivalent transit. Such precision requires superb instrument stability on time scales up to 2 days and systematic error removal to better than 20 ppm. The sole scientic instrument is the Photometer, a 0.95 m aperture Schmidt telescope that feeds the 94.6 million pixel CCD detector array, which contains both Science and Fine Guidance Sensor (FGS) CCDs. Since Kepler's launch in March 2009, we have been using the commissioning and science operations data to characterize the instrument and monitor its performance. We find that the in-flight detector properties of the focal plane, including bias levels, read noise, gain, linearity, saturation, FGS to Science crosstalk,and video crosstalk between Science CCDs, are essentially unchanged from their pre-launch values. Kepler'sunprecedented sensitivity and stability in space have allowed us to measure both short- and long- term effects from cosmic rays, see interactions of previously known image artifacts with starlight, and uncover several unexpected systematics that affect photometric precision. Based on these results, we expect to attain Kepler's planned photometric precision over 90% of the field of view.

CCD↗

NASA NTRS2010

Pixel-Level Calibration in the Kepler Science Operations Center Pipeline

We present an overview of the pixel-level calibration of flight data from the Kepler Mission performed within the Kepler Science Operations Center Science Processing Pipeline. This article describes the calibration (CAL) module, which operates on original spacecraft data to remove instrument effects and other artifacts that pollute the data. Traditional CCD data reduction is performed (removal of instrument/detector effects such as bias and dark current), in addition to pixel-level calibration (correcting for cosmic rays and variations in pixel sensitivity), Kepler-specific corrections (removing smear signals which result from the lack of a shutter on the photometer and correcting for distortions induced by the readout electronics), and additional operations that are needed due to the complexity and large volume of flight data. CAL operates on long (~30 min) and short (~1 min) sampled data, as well as full-frame images, and produces calibrated pixel flux time series, uncertainties, and other metrics that are used in subsequent Pipeline modules. The raw and calibrated data are also archived in the Multi-mission Archive at Space Telescope at the Space Telescope Science Institute for use by the astronomical community.

Calibration↗

NASA NTRS2010

Data Validation in the Kepler Science Operations Center Pipeline

We present an overview of the Data Validation (DV) software component and its context within the Kepler ScienceOperations Center (SOC) pipeline and overall Kepler Science mission. The SOC pipeline performs a transiting planetsearch on the corrected light curves for over 150,000 targets across the focal plane array. We discuss the DV strategy forautomated validation of Threshold Crossing Events (TCEs) generated in the transiting planet search. For each TCE, atransiting planet model is fitted to the target light curve. A multiple planet search is conducted by repeating the transitingplanet search on the residual light curve after the model flux has been removed; if an additional detection occurs, aplanet model is fitted to the new TCE. A suite of automated tests are performed after all planet candidates have beenidentified. We describe a centroid motion test to determine the significance of the motion of the target photocenterduring transit and to estimate the coordinates of the transit source within the photometric aperture; a series of eclipsingbinary discrimination tests on the parameters of the planet model fits to all transits and the sequences of odd and eventransits; and a statistical bootstrap to assess the likelihood that the TCE would have been generated purely by chancegiven the target light curve with all transits removed.

photometry↗

NASA NTRS2010

An Algorithm for the Fitting of Planet Models to Kepler Light Curves

We describe an algorithm which fits model planetary system parameters to light curves from Kepler Mission target stars. The algorithm begins by producing an initial model of the system which is used to seed the fit,with particular emphasis on obtaining good transit timing parameters. An attempt is then made to determine whether the observed transits are more likely due to a planet or an eclipsing binary. In the event that the transits are consistent with a transiting planet, an iterative fitting process is initiated: a wavelet-based whitening filter is used to eliminate stellar variations on timescales long compared to a transit; a robust nonlinear fitter operating on the whitened light curve produces a new model of the system; and the procedure iterates until convergence upon a self-consistent whitening filter and planet model. The fitted transits are removed from the light curve anda search for additional planet candidates is performed upon the residual light curve. The fitted models are used in additional tests which identify false positive planet detections: multiple planet candidates with near-identical fitted periods are far more likely to be an eclipsing binary, for example, while target stars in which the model lightcurve is correlated with the star centroid position may indicate a background eclipsing binary, and subtraction of all model planet candidates yields a light curve of pure noise and stellar variability, which can be used to study the probability that the planet candidates result from statistical fluctuations in the data.

Exoplanet↗

NASA NTRS2010

Semi-Weekly Monitoring of the Performance and Attitude of Kepler Using a Sparse Set of Targets

The Kepler spacecraft is in a heliocentric Earth-trailing orbit, continuously observing ~160,000 select stars over ~115 square degrees of sky using its photometer containing 42 highly sensitive CCDs. The science data from these stars, consisting of ~6 million pixels at 29.4-minute intervals, is downlinked only every ~30 days. Additional low-rate Xband communications contacts are conducted with the spacecraft twice a week to downlink a small subset of the science data. This paper describes how we assess and monitor the performance of the photometer and the pointing stability of the spacecraft using such a sparse data set.

Attitude reconstruction↗