Engineering PapersSearch

Engineering topics

Hefner, Jerry N.

Publications and source records attributed to Hefner, Jerry N..

Future Challenges and Opportunities in Aerodynamics

Investments in aeronautics research and technology have declined substantially over the last decade, in part due to the perception that technologies required in aircraft design are fairly mature and readily available. This perception is being driven by the fact that aircraft configurations, particularly the transport aircraft, have evolved only incrementally, over last several decades. If however, one considers that the growth in air travel is expected to triple in the next 20 years, it becomes quickly obvious that the evolutionary development of technologies is not going to meet the increased demands for safety, environmental compatibility, capacity, and economic viability. Instead, breakthrough technologies will he required both in traditional disciplines of aerodynamics, propulsion, structures, materials, controls, and avionics as well as in the multidisciplinary integration of these technologies into the design of future aerospace vehicles concepts. The paper discusses challenges and opportunities in the field of aerodynamics over the next decade. Future technology advancements in aerodynamics will hinge on our ability, to understand, model, and control complex, three-dimensional, unsteady viscous flow across the speed range. This understanding is critical for developing innovative flow and noise control technologies and advanced design tools that will revolutionize future aerospace vehicle systems and concepts. Specifically, the paper focuses on advanced vehicle concepts, flow and noise control technologies, and advanced design and analysis tools.

Kumar, Ajay

Laminar flow control - Introduction and overview

A development history and a development-trends evaluation are presented for laminar flow controlled airfoil technologies and design concepts, including the search for 'natural' laminar flow and actively controlled flow via suction through small pores on the airfoil surface. While most NASA activities in this field have been concerned with subsonic aircraft, it has been projected that the control of boundary layer turbulence may be even more critical to the aerodynamic efficiency of supersonic aircraft. Developmental programs for these techniques have been conducted with several modified conventional aircraft.

Hefner, Jerry N.

Viscous drag reduction in boundary layers

The present volume discusses the development status of stability theory for laminar flow control design, applied aspects of laminar-flow technology, transition delays using compliant walls, the application of CFD to skin friction drag-reduction, active-wave control of boundary-layer transitions, and such passive turbulent-drag reduction methods as outer-layer manipulators and complex-curvature concepts. Also treated are such active turbulent drag-reduction technique applications as those pertinent to MHD flow drag reduction, as well as drag reduction in liquid boundary layers by gas injection, drag reduction by means of polymers and surfactants, drag reduction by particle addition, viscous drag reduction via surface mass injection, and interactive wall-turbulence control.

Bushnell, Dennis M.

Viscous drag reduction via surface mass injection

Slot injection systems on the surfaces of aerodynamic bodies have been noted to consistently furnish substantial local skin friction reductions which are predictable on the basis of current numerical methods. Only crude systems studies, however, have been thus far completed. The most common configuration for slot ingestion in the literature involves tangential injection of air along a two-dimensional surface on which air constitutes the mainstream flow; attention is presently given to slot injection in low-speed and high-speed flows, as well as a discussion of aircraft applications and an evaluation of prospective possibilities for practical drag-reduction systems.

Hefner, Jerry N.

Dragging down fuel costs

It has been suggested that modest reductions in friction drag could save U.S. airlines $200-500 million a year. Potentially significant fuel savings are to be expected from laminar flow control (LFC) with suction surfaces on a CTOL subsonic transport; fuel savings from 25 to 40 percent are possible, depending on stage length. NASA has developed advanced computational design tools and methodology, subsonic and transonic NLF (natural laminar flow) and LFC airfoils, practical laminar wing construction techniques, and practical leading-edge treatments applicable to civil and military transports. It is concluded that skin-friction and induced drag approaches can combine to make a 50 percent reduction a reality for commercial and military aircraft of the future.

Hefner, Jerry N.

Research in Natural Laminar Flow and Laminar-Flow Control, part 1

Since the mid 1970's, NASA, industry, and universities have worked together to conduct important research focused at developing laminar flow technology that could reduce fuel consumption for general aviation, commuter, and transport aircraft by as much as 40 to 50 percent. The symposium was planned in view of the recent accomplishments within the areas of laminar flow control and natural laminar flow, and the potential benefits of laminar flow technology to the civil and military aircraft communities in the United States. Included were technical sessions on advanced theory and design tool development; wind tunnel and flight research; transition measurement and detection techniques; low and high Reynolds number research; and subsonic and supersonic research.

Hefner, Jerry N.

Research in Natural Laminar Flow and Laminar-Flow Control, part 2

Part 2 of the Symposium proceedings includes papers addressing various topics in basic wind tunnel research/techniques and computational transitional research. Specific topics include: advanced measurement techniques; laminar flow control; Tollmien-Schlichting wave characteristics; boundary layer transition; flow visualization; wind tunnel tests; flight tests; boundary layer equations; swept wings; and skin friction.

Hefner, Jerry N.

Research in Natural Laminar Flow and Laminar-Flow Control, part 3

Part 3 of the Symposium proceedings contains papers addressing advanced airfoil development, flight research experiments, and supersonic transition/laminar flow control research. Specific topics include the design and testing of natural laminar flow (NLF) airfoils, NLF wing gloves, and NLF nacelles; laminar boundary-layer stability over fuselage forebodies; the design of low noise supersonic/hypersonic wind tunnels; and boundary layer instability mechanisms on swept leading edges at supersonic speeds.

Hefner, Jerry N.

Combined riblet and lebu drag reduction system

The invention is a system of flow control devices which result in reduced skin friction on aerodynamic and hydrodynamic surfaces. The devices cause a breakup of large-scale disturbances in the boundary layer of the flow field. The riblet device acts to reduce disturbances near the boundary layer wall by the use of longitudinal striations forming V-shaped grooves. These grooves are dimensional on the order of the wall vortices and turbulent burst dimensions. The large eddy breakup device is a small strip or airfoil which is suspended in the upper region of the boundary layer. Various physical mechanisms cause a disruption of the large-scale vortices. The combination of the devices of this invention result in a substantial reduction in skin friction drag.

Walsh, Michael J.

Overview of the Langley viscous drag reduction program

As a result of reductions in form drag and roughness drag, skin friction, drag, or viscous drag now represents a major contributor to the cruise drag of subsonic business and transport aircraft, and hence, is considered a barrier problem to further significant improvements in the aerodynamic efficiency of these aircraft. To meet the challenge, research in the areas of laminar-flow control and turbulence control/drag reduction was initiated at NASA Langley Research Center. The significance of this research is discussed.

Hefner, Jerry N.