Engineering topics

Heck, M. L.

Publications and source records attributed to Heck, M. L..

24 records · Page 2

NASA NTRS1982

The adaptation of a strap down formulation for processing inertial platform data

An estimator propagation formulation which ultilizes dynamic data (attitude and sensed acceleration information) from a gimballed inertial platform has been developed to aid in the Shuttle post-flight trajectory reconstruction process and aerodynamic coefficient determination studies. Unlike the classical inertial algorithms, this formulation yields a six degree-of-freedom fully coupled state and attitude estimate. Furthermore, this inertial version is shown to be independent of initial unknown platform misalignments. Results obtained using actual Inertial Measurement Unit (IMU) data and Aerodynamic Coefficient Identification Package (ACIP) strap down data from Shuttle flights are presented.

Heck, M. L.↗

NASA NTRS1982

Reconstruction of the 1st Space Shuttle (STS-1) entry trajectory

A discussion of the generation of the best estimate trajectory (BET) of the first Space Shuttle Orbiter entry flight is presented. The BET defines a time history of the state, attitude, and atmospheric relative parameters throughout the Shuttle entry from an altitude of approximately 183 km to rollout. The inertial parameters were estimated utilizing a weighted least squares batch filter algorithm. Spacecraft angular rate and acceleration data derived from the Inertial Measurement Unit were utilized to predict the state and attitude which was constrained in a weighted least squares process to fit external tracking data consisting of ground based S-band and C-band data. Refined spacecraft altitude and velocity during and post rollout were obtained by processing artificial altimeter and Doppler data. The BET generation process is discussed. Software and data interface discussions are included. The variables and coordinate systems utilized are defined. STS-1 mission peculiar inputs are summarized. A listing of the contents of the actual BET is provided.

Findlay, J. T.↗

NASA NTRS1981

An innovative air data system for the Space Shuttle Orbiter - Data analysis techniques

The Shuttle Entry Air Data System (SEADS) is an experimental system designed to supply research quality air data and to meet Orbiter operational air data requirements throughout entry. SEADS incorporates no mechanical devices but is based on the concept that the fuselage proper, whether symmetrical or not, can be instrumented so as to function both as a pitot-static probe and as a differential pressure flow direction sensor. Specifically SEADS consists of 20 flush orifices, each routed to a pair of absolute pressure transducers. A computational technique has been developed capable of extracting air data parameters solely from surface pressure measurements. The digital filtering algorithm implemented in SEADS is the natural adaptation to air data sensing of a technology widely used in navigation, guidance, and control systems.

Pruett, C. D.↗

NASA NTRS1981

Shuttle /STS-1/ entry trajectory reconstruction

The methods and data used to reconstruct the Shuttle entry trajectory aerodynamics from 180 km to landing are reviewed. Onboard accelerometer and gyro measurements are used with a weighted least squares filter along with ground tracking data to provide the evolving spacecraft state. The software development is described, noting that computations include linear acceleration and angular rate data, aerodynamic coefficient, and inertial measurement units, sampled at 170 Hz. Ground tracking data was gathered on S- and C-bands; Guam data is considered critical as it was taken during the blackout at the beginning of entry. The generation of a best estimate trajectory, combining flight and ground data, yields inplane parameters of altitude, flight path angle, and velocity for comparison with navigational instrumentation. Predicted lift/drag ratios were found to be accurate from Mach 1-25, and up to 23% low below Mach 1.

Compton, H. R.↗

NASA NTRS1980

The processing of IMU data in ENTREE implementation and preliminary results

It is demonstrated that the shuttle entry trajectory can be accurately represented in ENTREE with IMU data available postflight. The IMU data consist of platform to body quaternions, and accumulated sensed velocities in mean of fifty (M50) coordinates approximately every second. The preprocessing software required to incorporate the IMU data in ENTREE is described as well as the relatively minor code changes to the ENTREE program itself required to process the IMU data. Code changes to the ENTREE program and input tape data format and content changes are described.

Heck, M. L.↗

NASA NTRS1980

Formulation of additional observables for ENTREE

The S-band X and Y angles, SAMS, and TACAN range and bearing were incorporated into the ENTREE software for use by experimenters at LaRC for entry trajectory reconstruction purposes. Background discussions present the need for this added capability. Formulations for the various observables are presented. Both north-south and east-west antenna mounts were provided for in the S-band angle computations. Sub-vehicle terrain height variations are included in the SAMS model. Local magnetic variations were incorporated for the TACAN bearing computations. Observable formulations are discussed in detail along with the partial computations.

Findlay, J. T.↗