Engineering Papers⌕ Search

Engineering topics

Head, J. W., III

Publications and source records attributed to Head, J. W., III.

At least 19 records

Observational Constraints on the Identification of Shallow Lunar Magmatism: Insights from Floor-Fractured Craters

Floor-fractured craters are a class of lunar crater hypothesized to form in response to the emplacement of a shallow magmatic intrusion beneath the crater floor. The emplacement of a shallow magmatic body should result in a positive Bouguer anomaly relative to unaltered complex craters, a signal which is observed for the average Bouguer anomaly interior to the crater walls. We observe the Bouguer anomaly of floor-fractured craters on an individual basis using the unfiltered Bouguer gravity solution from GRAIL and also a degree 100-600 band-filtered Bouguer gravity solution. The low-magnitude of anomalies arising from shallow magmatic intrusions makes identification using unfiltered Bouguer gravity solutions inconclusive. The observed anomalies in the degree 100-600 Bouguer gravity solution are spatially heterogeneous, although there is spatial correlation between volcanic surface morphologies and positive Bouguer anomalies. We interpret these observations to mean that the spatial heterogeneity observed in the Bouguer signal is the result of variable degrees of magmatic degassing within the intrusions.

Jozwiak, L. M.↗

Identification of a New Spinel-Rich Lunar Rock Type by the Moon Mineralogy Mapper (M (sup 3))

The canonical characterization of the lunar crust is based principally on available Apollo, Luna, and meteorite samples. The crust is described as an anorthosite-rich cumulate produced by the lunar magma ocean that has been infused with a mix of Mgsuite components. These have been mixed and redistributed during the late heavy bombardment and basin forming events. We report a new rock-type detected on the farside of the Moon by the Moon Mineralogy Mapper (M3) on Chandrayaan-1 that does not easily fit with current crustal evolution models. The rock-type is dominated by Mg-spinel with no detectible pyroxene or olivine present (<5%). It occurs along the western inner ring of Moscoviense Basin as one of several discrete areas that exhibit unusual compositions relative to their surroundings but without morphological evidence for separate processes leading to exposure.

Pieters, C. M.↗

Mineralogy of the Lunar Crust in Spatial Context: First Results from the Moon Mineralogy Mapper (M3)

India's Chandrayaan-1 successfully launched October 22, 2008 and went into lunar orbit a few weeks later. Commissioning of instruments began in late November and was near complete by the end of the year. Initial data for NASA's Moon Mineralogy Mapper (M3) were acquired across the Orientale Basin and the science results are discussed here. M 3 image-cube data provide mineralogy of the surface in geologic context. A major new result is that the existence and distribution of massive amounts of anorthosite as a continuous stratigraphic crustal layer is now irrefutable.

Pieters, C. M.↗

GCM Simulations of Tropical Ice Accumulations: Implications for Cold-based Glaciers

Each of the three Tharsis Montes shield volcanoes on Mars has fan-shaped deposits on their flanks. A detailed analysis of the multiple facies of the Arsia Mons deposits, coupled with field observations of polar glaciers in Antarctica, shows that they are consistent with deposition from cold-based mountain glaciers. Key features of these glaciers are: (1) they formed only on the western flank of each volcano, (2) enough ice accumulated to cause them to flow but without basal melting, (3) there were multiple advances and retreats, (4) the last major glaciation was more than several million years ago, (5) the areal extent of the deposits they left behind decreases northward, (6) together the deposits range in elevation from a low of 1.5 to a high of 8.5 km, and (7) there are no signs that significant accumulation is occurring today.

Haberle, R. M.↗

Resurfacing of Ganymede by Liquid-Water Volcanism

A long-popular model for producing Ganymede s bright terrain involves flooding of low-lying graben with liquid water, slush, or warm, soft ice. The model suffers from major problems, however, including the absence of obvious near-surface heat sources, the negative buoyancy of liquid water, and the lack of a mechanism for confining the flows to graben floors. We show that topography - such as a global set of graben - causes subsurface (a hydrostatic) pressure gradients that can "suck" subsurface liquid water upward onto the floors of topographic lows (graben). As the low areas become full, the pressure gradients disappear and the resurfacing ceases. This provides an explanation for the observed straight dark-bright terrain boundaries: water cannot overflow the graben, so surfacing rarely embays craters and other rough topography. Subsurface liquid water must exist for the scenario to exist, of course, and is plausibly provided by tidal heating during an ancient orbital resonance. This abstract is a summary of Showman et al. recently submitted to Icarus.

Showman, A. P.↗

New Perspectives on Ancient Mars

Global data sets returned by the Mars Global Surveyor (MGS), Mars Odyssey, and Mars Express spacecraft and recent analyses of Martian meteorites suggest that most of the major geological events of Martian history occurred within the first billion years of solar system formation. This period was a time of heavy impact bombardment of the inner solar system, a process that strongly overprinted much of the Martian geological record from that time. Geophysical signatures nonetheless remain from that period in the Martian crust, and several geochemical tracers of early events are found in Martian meteorites. Collectively, these observations provide insight into the earliest era in Martian history when the conditions favoring life were best satisfied.

Solomon, Sean C.↗

Buffered and unbuffered dike emplacement on Earth and Venus - Implications for magma reservoir size, depth, and rate of magma replenishment

Models of the emplacement of lateral dikes from magma chambers under constant (buffered) driving pressure conditions and declining (unbuffered) driving pressure conditions indicate that the two pressure scenarios lead to distinctly different styles of dike emplacement. In the unbuffered case, the lengths and widths of laterally emplaced dikes will be severely limited and the dike lengths will be highly dependent on chamber size; this dependence suggests that average dike length can be used to infer the dimensions of the source magma reservoir. On Earth, the characteristics of many mafic-dike swarms suggest that they were emplaced in buffered conditions (e.g., the Mackenzie dike swarm in Canada and some dikes within the Scottish Tertiary). On Venus, the distinctive radial fractures and graben surrounding circular to oval features and edifices on many size scales and extending for hundreds to over a thousand km are candidates for dike emplacement in buffered conditions.

Parfitt, E. A.↗

Magellan: Preliminary description of Venus surface geologic units

Observations from approximately one-half of the Magellan nominal eight-month mission to map Venus are summarized. Preliminary compilation of initial geologic observations of the planet reveals a surface dominated by plains that are characterized by extensive and intensive volcanism and tectonic deformation. Four broad categories of units have been identified: plains units, linear belts, surficial units, and terrain units.

Saunders, R. S.↗

A comparison of the regional slope characteristics of Venus and earth - Implications for geologic processes on Venus

The range of 3 degree by 3 degree regional slopes of the Earth and Venus is similar (approximately 0.0-2.4 degrees), although the surface distribution of these values differs significantly. On earth, cratonic and abyssal plains form extensive regions of 0.0 degree slope. Within these regions a variety of features (mid-ocean ridges, volcanic island chains, subduction zones, and floded mountains) have regional slope characteristics influenced by seafloor spreading and plate recycling, as well as an active weathering regime. The plains provinces of Venus are much more rugged than earth's plains and are marked by numerous closely spaced circular and linear features (0.1-0.2 degree regional slope) concentrated into broad linear zones of global extent. Although Venus highlands are bounded by narrow zones of relatively steep slope, the margins of Aphrodite Terra and Beta Regio are not as steep as earth's continental margins and appear to be best developed parallel to the trends of major chasmata within these regions. Ishtar Terra's margins are significantly steeper and more continuous than other highland margins and are comparable to passive margins on earth. The Venus highlands do not contain appreciable smooth, flat interior regions, implying that highland topography is not significantly modified by erosion or deposition.

Sharpton, V. L.↗

Global reorientation and its effect on tectonic patterns on Ganymede

The basins of Ganymede are studied in order to examine the effects of global reorientation on the grooves and furrows of the satellite. An impact basin and the global reorientation of Ganymede were modeled. The damping time, the time for relaxation of tidal bulge, and the time for isostatic adjustment of craters are significant in calculating the duration and amount of global reorientation. The regional global control of groove orientation is examined; the data reveal that the tidal despinning and furrow formation created the reactivated zones of weakness in which the groove sets were formed. It is observed that the grooved terrain emplacement caused a 15 deg shift in the paleopole.

Murchie, S. L.↗

Surface characteristics of Venus derived from Pioneer Venus altimetry, roughness, and reflectivity measurements

Pioneer Venus data sets for global topography, surface roughness, and reflectivity are analyzed, and the geological significance of some of the distinctive surface types is locally calibrated by examining high-resolution images from the Venera lander spacecraft and the Arecibo Observatory. Regional rock and bedrock surfaces are found to cover the majority of the planet. The relatively smooth rock and bedrock surfaces probably represent lava flows. Porous and unconsolidated fine materials cover less than about 27 percent of the surface. The distribution of soil surfaces indicate that they are the result of local weathering and small amounts of lateral transport. Several hypotheses for the origin of the high-dielectric materials which cover a small portion of the surface are discussed.

Head, J. W., III↗

Analysis of regional slope characterisgics on Venus and earth

The altitude frequency distribution for Venus and earth is analyzed, and the regional slope values correponding to teh 3 deg by 3 deg region centered about each elevation measurement in Venus and earth topography is calculated. The range and frequency distribution of slopes of Venus and earth are described, trends in mean regional slope versus elevation are analyzed, and the effects on terrestrial regional slope resulting from the removal of the ocean load from seafloor topography are examined. The similarities and differences of the two planets are discussed in terms of these parameters.

Sharpton, V. L.↗

Geological, structural, and geomorphological analyses from SIR-B

A Shuttle Imaging Radar-B (SIR-B) study designed to develop a better understanding of the application of radar in geological studies is described. The specific objectives for deltaic environments include the examination of delta morphology and the intertidal zone, the surface expression of shallow bathymetry, the characterization of vegetation cover, and the water balance of the delta. In impact crater environments, the goals include the establishment of the radar characteristics of exposed craters and the application of this knowledge to test for the detectability of very poorly exposed craters.

Head, J. W., III↗

Stratigraphy and structural evolution of southern Mare Serenitatis - A reinterpretation based on Apollo Lunar Sounder Experiment data

Two subsurface reflecting horizons have been detected by the Apollo Lunar Sounder Experiment (ALSE) in the southern Mare Serenitatis which appear to be regolith layers more than 2 m thick, and are correlated with major stratigraphic boundaries in the southeastern Mare Serenitatis. The present stratigraphic boundaries in the southeastern Mare Serenitatis. The present analysis implies that the lower horizon represents the interface between the earliest mare unit and the modified Serenitatis basin material below. The depth of volcanic fill within Serenitatis is highly variable, with an average thickness of mare basalts under the ALSE ground track of 1.6 km. Comparisons with the Orientale basin topography suggests that a major increaae in load thickness could occur a few km basinward of the innermost extent of the traverse. The history of volcanic infilling of Mare Serenitatis was characterized by three major episodes of volcanism.

Sharpton, V. L.↗

A comparison of volcanic eruption processes on earth, moon, Mars, Io and Venus

The physical, chemical, and atmospheric characteristics of the silicate planets and satellites are surveyed in terms of their effects on the volcanic evolution of the surfaces of these bodies. The equations relating the parameters affecting magma ascent through the crust and eruption are analyzed, and three major types of eruption are characterized: effusive, steady explosive, and unsteady explosive. This analytical framework is then used to predict the nature of volcanic activity on each of the planets and satellites, and the predictions are compared with actual observations. Outstanding problems are discussed, with emphasis on the need for a general model of planetary interior dynamics applicable to bodies with varying degrees of interior viscosity, mantle activity, and lithospheric plate tectonics.

Wilson, L.↗