Engineering topics
Publications and source records attributed to Hayes, Douglas G..
Both equilibration time and the transfer of Winsor-III microemulsion systems from one container to another affect the structure of the bicontinuous phase in the vertical direction.
Soil-biodegradable plastic has been increasingly used as mulches in agriculture, which provides not only agronomical benefits but also in situ disposal and biodegradation options. However, soil-biodegradable plastic mulches inevitably fragment into micro- and nanoplastics during biodegradation, which can reside in soils or migrate into deep soils, where they may not degrade readily due to reduced microbial activity. To date, little is known about the transport of soil-biodegradable micro- and nanoplastics in soils. Here, in this study, we studied the transport of soil-biodegradable nanoplastics (∼200 nm) made of polybutylene adipate co-terephthalate (PBAT) in unsaturated sand (proxy for soil). Specifically, we studied the mobility of pristine and weathered PBAT nanoplastics in the absence and presence of proteins (positively charged lysozyme and negatively charged bovine serum albumin, pH = 7.7). We found that (1) both pristine and the weathered PBAT nanoplastics were mobile; (2) positively charged lysozyme formed protein-coronas around PBAT nanoplastics and inhibited the transport; and (3) decreased water saturation promoted the retention of PBAT nanoplastics via physical straining. These results suggest that soil-biodegradable nanoplastics fragmented from soil-biodegradable plastic mulches are mobile and may readily migrate into deep soil layers, but positively charged proteins and unsaturated flow would prevent such transport via formation of protein-corona and physical straining.
While much is known about microplastics in aquatic environments, only few studies have focused on how microplastics interact with terrestrial organisms. The objective of our study was to investigate the interactions of earthworms with microplastics in a natural environment with environmentally realistic plastic concentrations. Here we investigated whether earthworms would ingest microplastics and incorporate them into their bodies and cast, and whether microplastics would alter the intestinal and soil microbiome. Lumbricus terrestris was exposed to two types of mi croplastics, biodegradable polybutylene adipate terephthalate (PBAT) and low-density polyethylene (LDPE) in mesocosoms filled with natural soil. Microplastics were mixed with poplar leaves and earthworms were allowed to forage for food for 20 days. Surface and bulk soil, earthworm cast, and earthworms themselves were sampled and analyzed for plastic content and microbial communities. Earthworms did not show macroscopic health deterioration (weight loss, vitality). We observed microplastics particles in earthworm casts and guts. Raman spectroscopy indicated that PBAT in guts and cast had degraded to some extent; however, LDPE remained unchanged among the different samples. Microbial analysis showed that soil and casts has similar microbial communities; however, they were signicantly different from the guts samples. Microplastic treatments did not result in a statistically signicant change in bacterial richness, diversity or community composition compared to controls. Taken together, our results suggest that, at environmentally realistic concentrations and short exposure times, PBAT and LDPE microplastics do not have adverse effects on Lumbricus terrestris earthworms.
Abstract The objective of this study is to demonstrate that melittin, a well‐studied antimicrobial peptide (AMP), can be solubilized in an active form in bicontinuous microemulsions (BMEs) that employ biocompatible oils. The systems investigated consisted of Winsor‐III and ‐IV BME phases composed of Water/Aerosol‐OT (AOT)/Polysorbate 85/isopropyl myristate and a Winsor‐IV BME employing Polysorbate 80 and limonene. We found that melittin resided in an α‐helix‐rich configuration and was in an apolar environment for the AOT/Polysorbate 85 Winsor‐III system, suggesting that melittin interacted with the surfactant monolayer and was in an active conformation. An apolar environment was also detected for melittin in the two Winsor‐IV systems, but to a lesser extent than the Winsor‐III system. Small‐angle X‐ray scattering analysis indicated that melittin at a concentration of 1.0 g/L aq in the aqueous subphase of the Winsor‐IV systems led to the greatest impact on the BME structure (e.g., decrease of quasi‐periodic repeat distance and correlation length and induction of interfacial fluidity). The antimicrobial activity of the Polysorbate 80 Winsor‐IV system was evaluated against several bacteria prominent in chronic wounds and surgical site infections (SSIs). Melittin‐free BMEs inhibited the growth of all tested bacteria due to its oil, limonene, while the inclusion of 1.0 g/L aq of melittin in the BMEs enhanced the activity against several bacteria. A further increase of melittin concentration in the BMEs had no further enhancement. These results demonstrate the potential utility of BMEs as a delivery platform for AMPs and other hydrophilic and lipophilic drugs to inhibit antibiotic‐resistant microorganisms in chronic wounds and SSIs.
We describe the structural studies of microemulsions (μEs) prepared from water, toluene, butanol, and polysorbate 20 (PS20) that we recently used as electrolytes. Small-angle neutron scattering was used to monitor the development of the bicontinuous system as a function of the water-to-surfactant mass ratio on a constant oil-to-surfactant dilution line, revealing how the domain size, correlation length, amphiphilicity factor, and bending moduli change with composition. Kratky and Porod analyses are also employed, providing further structural detail of the scattering domains. Here, we demonstrate that controlling the water-to-surfactant ratio with a constant oil-to-surfactant dilution affects the bicontinuous phase, reveals a sizeable compositional region with structural similarities, and provides insight into the correlation of structure to physical properties. Voltammetric results are presented to examine how the evolution of the bicontinuous structure formed in a μE prepared from water, toluene, butanol, and PS20 contributes to the electrochemical response. These findings, therefore, provide essential information that will guide the formulation of μEs as electrolytes for energy storage.
Biodegradable plastics can reach full degradation when disposed of appropriately and thus alleviate plastic pollution caused by conventional plastics. But additives can be released into the environment during degradation, and the fate of these additives can be affected by the degradation process. In this study, we characterized TiO 2 particles released from a biodegradable plastic mulch during composting and studied the transport of the released TiO 2 particles in inert sand and agricultural soil columns under unsaturated flow conditions. TiO 2 microparticles were released from the biodegradable plastic mulch in both single particle and cluster forms. The released TiO 2 microparticles were fully retained in unsaturated soil columns due to its ne texture, slow flow rate, and favorable attachment conditions. But in unsaturated sand columns, the released TiO 2 microparticles were highly mobile. Additionally, comparison with the pristine TiO 2 microparticles revealed that the enhanced mobility of the released TiO 2 microparticles was caused by the presence of compost residues which blocked attachment sites on the sand surface. This study demonstrates that TiO 2 microparticles can be released during composting of biodegradable plastics, and the transport potential of the released TiO 2 microparticles in the terrestrial environment can be enhanced by the presence of compost material.
Redox flow batteries have recently received considerable attention as possible large-scale energy storage devices, but their low energy density has inhibited widespread application. In this work, a novel strategy of decoupling conductivity and solubility of electrolytes using microemulsion is put forward to enhance ionic conduction of non-aqueous electrolytes, increase the selectivity of active species, improve the battery voltage, and eventually achieve the possibility of high energy density. We report a study of the electrochemistry of ferrocene in single phase Tween® 20/1-butanol/H 2 O/toluene microemulsion system at 20 °C. At low and intermediate surfactant to water weight ratios (<0.5/0.5), the voltammogram exhibits reversible electrochemical behavior, while at high surfactant levels the curves show lower levels of reversibility. The latter voltammograms have a form typically associated with high resistance in solution, consistent with a gradual transition in microstructure as surfactant levels increase. This change in structure is supported by correlations with conductivity results based on the literature. The voltammograms show little evidence of anomalies in double layer capacitance or electrode "blocking" by droplets, suggesting that the electron transfer is indeed occurring in a facile manner between the electrode and the ferrocene inside the oil phase.
Abstract The membrane proteins (MP) α‐synuclein (ASYN) and bacteriorhodopsin (BR) were readily incorporated into bicontinuous microemulsions (BμEs) formed by two microemulsion systems: water/heptane/Aerosol‐OT (AOT)/CK‐2,13 and water/dodecane/sodium dodecyl sulfate (SDS)/1‐pentanol. (CK‐2,13 is an alkyl ethoxylate possessing two alkyl tail groups of carbon chain length 2 and 13 and an average degree of ethoxylation of 5.6.) MP were encapsulated in BμEs through preparation of Winsor‐III systems at optimal salinity, with the anionic surfactants AOT and SDS providing the driving force for extraction. Dissolution of ASYN in BμEs greatly increased the former's α‐helicity, similar to ASYN's behavior in the presence of biomembranes, while BμE‐ and vesicle‐encapsulated BR possessed similar secondary structure. Small‐angle neutron scattering (SANS) results clearly demonstrated the direct interaction of MP with the surfactants, resulting in a decrease of surface area per volume for surfactant monolayers due to decreased surfactant efficiency. The SANS signal for ASYN was isolated through the use of neutron contrast matching for the surfactants through partial deuteration of water and oil, one of the first reports of contrast matching for BμEs in the literature. The SANS results of the contrast‐matched sample reflected similar aggregation for ASYN in BμEs as was reported previously for vesicles and SDS solution. This study demonstrates the potential use of BμEs as MP host systems for conducting biochemical reactions such as the conversion of sunlight into adenosine triphosphate by BR and studying the fundamental behavior of MP, such as the role of ASYN dysfunction in Parkinson's disease, as well as for isolation and purification of MP via Winsor‐III‐based extraction.