Engineering Papers⌕ Search

Engineering topics

Harvey-Thompson, Adam James

Publications and source records attributed to Harvey-Thompson, Adam James.

At least 73 records · Page 4

Investigating the effect of adding an on-axis jet to Ar gas puff Z pinches on Z.

Double-shell Ar gas puff implosions driven by 16.5±0.5 MA on the Z generator at Sandia National Laboratories are very effective emitters of Ar K-shell radiation (photon energy >3 keV), producing yields of 330 ± 9% kJ (B. Jones et al., Phys. Plasmas, 22, 020706, 2015). In addition, previous simulations and experiments have reported dramatic increases in K-shell yields when adding an on-axis jet to double shell gas puffs for some configurations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigating Laser Preheat and Applied Magnetic Fields Relevant to the MagLIF Fusion Scheme

The MAGnetized Liner Inertial Fusion (MagLIF) scheme has achieved thermonuclear fusion yields on the Z Facility by imploding a cylindrical liner filled with D 2 fuel that is preheated with a multi-kJ laser and pre-magnetized with an axial Bz=10 T magnetic field. Preheating (T e = 100-200 eV) and pre-magnetizing (10-30 T) the fuel serves to reduce the implosion velocity required to achieve multi-keV fusion-relevant temperatures at stagnation with a modest radial convergence. The challenge of fuel preheat in MagLIF is to deposit multiple-kJ of energy into the underdense (n e /n c <0.1) fuel over ~10 mm target length efficiently and without introducing contaminants. Once the fuel is heated the applied axial magnetic field (ω ce τ e ~ 10) needs to suppress electron thermal conduction sufficiently to prevent unacceptable heat losses to the liner walls. In this LDRD we investigated laser energy deposition at two facilities: The OMEGA-EP laser at the Laboratory for Laser Energetics and the Z-beamlet laser at Sandia National Labs utilizing the PECOS chamber. Multiple experiments were carried out investigating laser transmission through LEH foils, laser heating of underdense gasses and the effects of magnetization on laser preheat. The studies find that magneto-hydrodynamic simulations are able to reproduce energy deposition at MagLIF-like conditions but that at the intensities currently used to preheat MagLIF significant laser plasma instabilities (LPI) occur which partly explain the inability of codes to reproduce previous MagLIF preheat studies. The experiments find that reducing the intensity and smoothing the beam dramatically reduces the amount of stimulated Brillouin backscatter and produces deposition profiles more similar to those produced in simulations. The experiments have provided a large and varied dataset that can be compared to simulations. As part of the LDRD new experimental capabilities have also been developed that will be used to design future MagLIF integrated experiments and investigate fuel magnetization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fusion-neutron measurements for magnetized liner inertial fusion experiments on the Z accelerator

Several magnetized liner inertial fusion (MagLIF) experiments have been conducted on the Z accelerator at Sandia National Laboratories since late 2013. Measurements of the primary DD (2.45 MeV) neutrons for these experiments suggest that the neutron production is thermonuclear. Primary DD yields up to 3e12 with ion temperatures ~2-3 keV have been achieved. Measurements of the secondary DT (14 MeV) neutrons indicate that the fuel is significantly magnetized. Measurements of down-scattered neutrons from the beryllium liner suggest ρR liner ~ 1g/cm 2 . Neutron bang times, estimated from neutron time-of-flight (nTOF) measurements, coincide with peak x-ray production. Furthermore, plans to improve and expand the Z neutron diagnostic suite include neutron burn-history diagnostics, increased sensitivity and higher precision nTOF detectors, and neutron recoil-based yield and spectral measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗