Engineering Papers⌕ Search

Engineering topics

Harmon, G. R.

Publications and source records attributed to Harmon, G. R..

Identification and repair of intermittent cable faults in nuclear power plants - 131

The nuclear industry uses cable circuits as an integral part of a plant's reactor protection system (RPS), instrumentation and control (I and C) and power distribution systems. The reliability of these systems is critical for continued operation of the world's aging nuclear fleet, as well as for safe shutdown of the reactor. When intermittent faults occur in cable circuits, the symptom of the problem often appears and disappears in milliseconds while the aftereffects can result in spurious alarms and automatic actuation of safety systems. Problems are compounded when component degradation causes a cable circuit to transmit inaccurate information that does not represent actual plant operating conditions. The root cause of intermittent cable circuit operation can include degradation of cable and connectors from heat, humidity, radiation, and vibration. Unlike hard faults (which are constant open or short circuits), intermittent faults are defined as a temporary change in impedance that may only last for a few milliseconds. While less disruptive than hard faults, signal spiking from intermittent faults can often lead to alarm conditions and reactor trips. A soft fault is defined as a subtle variation the electrical characteristics of the circuit that still permit the continued operation of the circuit. A soft fault may be a precursor to a hard fault due to continued degradation of the fault over time. The focus of this paper is the description of a cable testing system that can be connected to an active, low frequency circuit and continuously monitor electrical characteristics using the time domain reflectometry (TDR) technique until an intermittent impedance change occurs. This technique uses the difference in frequency response of the circuit and the TDR to isolate the TDR signature from the active circuit data . When a momentary impedance change occurs that exceeds a preconfigured limit threshold, the distance to fault data is automatically overlaid with the healthy baseline reference and stored in a database for diagnosis and repair. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A method for determining optimum re-entry trajectories

The Pontryagin Maximum Principle is used to formulate the problem of finding optimum atmospheric vehicular reentry trajectories. The optimization problem is that of minimizing an integral which is a function of the state and control variables. The vehicle's motion is assumed to be influenced by a gravitational force and an aerodynamic force. The problem is formulated and the necessary equations are developed simultaneously for three sets of Euler angles. Computational procedures are suggested so that numerical trajectories may be generated.

Reiter, W. F.↗

Research on development of equations for performance trajectory computations

The analytical foundation of the Hamilton-Jacobi theory was investigated for application to space flight problems. A specific problem area is defined as follows: (1) to attempt to use the first order perturbation theory, which has been developed for the motion of a uniaxial satellite in a gravitational field in studying the motion of a triaxial satellite in a gravity field; and (2) also to expand theory for the uniaxial case to higher order.

Harmon, G. R.↗

Vehicle control for fuel optimization

The problem of predicting the minimum fuel trajectory for a six degree of freedom vehicle which has a motion characterized by the first order differential equations of translational and rotational dynamics is considered. The thrust direction and center of gravity of the vehicle are assumed to be fixed with respect to the vehicle. Thrust magnitude and the control moment are used as control variables and appear linearly in the equation of motion. Pontryagin's Maximum Principle is used to solve the variational problem. With this formulation, the extremal controls are bang-bang with the exception of the singular case.

Dannenberg, K. D.↗

Research on development of equations for performance trajectory computation

A computer program for computing the performance trajectory of spacecraft was developed. An analytical study of a minimum fuel flight for high speed aircraft was conducted. The computer program to compute a minimum time reentry into the atmosphere for an Apollo-type capsule is presented. A technical summary of the minimum fuel problem is provided.

Harmon, G. R.↗

Some suggested approaches to solving the Hamilton-Jacobi equation associated with constrained rigid body motion

Some methods of approaching a solution to the Hamilton-Jacobi equation are outlined and examples are given to illustrate particular methods. These methods may be used for cases where the Hamilton-Jacobi equation is not separable and have been particularly useful in solving the rigid body motion of an earth satellite subjected to gravity torques. These general applications may also have usefulness in studying the motion of satellites with aerodynamic torque and in studying space vehicle motion where thrusting is involved.

Fitzpatrick, P. M.↗

Hamilton/Jacobi perturbation methods applied to the rotational motion of a rigid body in a gravitational field

The formalism for studying perturbations of a triaxial rigid body within the Hamilton-Jacobi framework is developed. The motion of a triaxial artificial earth satellite about its center of mass is studied. Variables are found which permit separation, and the Euler angles and associated conjugate momenta are obtained as functions of canonical constants and time.

Fitzpatrick, P. M.↗

A maximum principle re-entry study

Mathematical model of maximum principle of Pontryagin used to find point-to-point reentry trajectory of space vehicle

REENTRY TRAJECTORY↗