Engineering Papers⌕ Search

Engineering topics

Hanson, J.

Publications and source records attributed to Hanson, J..

22 records · Page 2

ST7-DRS: A Step Towards Drag-free and High-precision Formation Control

The Space Technology 7 Disturbance Reduction System (ST7-DRS) is an in-space technology demonstration within NASA's New Millennium Program. ST7-DRS is designed to validate system-level technologies that are required for future gravity missions (including the planned LISA gravitational-wave observatory) and for future formation-flying interferometer missions (including the planned MAXIM black-hole imager). ST7-DRS is based around a freely-floating test mass contained within a spacecraft structure that will shield this test mass from all external forces (aside from gravity). The spacecraft position will be continuously controlled, such that the spacecraft, itself, will remain centered about this test mass, essentially flying in formation with it. Colloidal micro-thrusters will be used to control the spacecraft s position to within a few nanometers, over time scales of tens to thousands of seconds. In order to detect the residual acceleration noise on the main test mass, a second test mass will be flown alongside the first, within the same physical spacecraft structure. This test mass will serve as a cross-reference for the first, and will also be used as a reference for the spacecraft's attitude control. The spacecraft's attitude will be controlled to an accuracy of a few milli-arc-seconds, also utilizing the colloidal micro-thrusters. ST7-DRS will consist of an instrument package (containing the test masses) and a set of micro-thrusters, which will be attached to the European Space Agency s SMART-2 spacecraft, set to launch in November 2007.

Houghton, M.↗

Arc tracking of cables for space applications

The main objective of this study is to develop a new test method that is suitable for the assessment of the resistance of aerospace cables to arc tracking for different specific environmental and network conditions of spacecrafts. This paper reports the purpose, test conditions, test specimen, test procedure, and test acceptance criteria of seven different (200-250 mm long) cables.

Koenig, D.↗

Thermophysical characterization of composite materials under transient heating conditions

Thermophysical property measurements were made under transient heating conditions on several materials being considered for use in SCOUT rocket motors. The materials included were ATJ graphite, MX 2600 silica phenolic, FM 5272 cellulose phenolic, and two carbon-carbon composites: CARBITEX 700 and RPP-4. The ATJ was included as a reference or base line material to check performance of the transient tests as it was not expected to be sensitive to heating rate. Measurements included in the program were thermal conductivity, strength, compressive stress-strain (carbon-carbon only), thermal expansion and the effective thermal expansion under partially restrained conditions. Development of this latter measurement was a major part of the program. It consisted of partially restraining the expansion of a specimen as it was heated, measuring the load and strain which occurred (together with a simultaneous modulus determination by superimposing a small cyclic load) and using these quantities to calculate what the effective thermal expansion would have to be to produce the observed stress and deformation. For materials which are sensitive to heating rate, such as reinforced phenolics, it was believed that this would provide a more realistic determination of the thermal expansion as it more nearly simulates the conditions experienced in end use.

Roetling, J.↗